Soleus Air SG-PAC-12E1 Bedienungsanleitung

12,000 BTU Portable Air Conditioner

Operating Instructions

Model No. Reference No.

SG-PAC-12E1 (KY-120E1)

SG-PAC-12E1HP (KY-120E1HP)

Thank you for choosing a Soleus Air Powered by Gree Portable Air Conditioner. This owner’s man-

ual will provide you with valuable information necessary for the proper care and maintenance of your

new product. Please take a few moments to thoroughly read the instructions and familiarize yourself

with all the operational aspects of your new Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 12 inches (50 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the

manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating

temperature, the air conditioner may not work properly.

• Dehumidifier mode works when ambient temperatures are between 61°F - 86°F

• Air Conditioner mode operates up to an ambient temperature of 95°F.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hose (1)

Front Exhaust Hose Adapter (1)

Window Kit Adapter (1)

Rear Exhaust Hose Adapter (1)

Remote Control & AAA Batteries (2 batteries)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Owner’s Manual

Model Number SG-PAC-12E1 SG-PAC-12E1HP (with Heat)

Power Supply (Ph/V/Hz) 1/115/60Hz 1/115/60Hz

Dehumidifying Capacity (Pints/Day) 81.6 81.6

Rated Cooling Capacity (BTU/h) 12,000 12,000

Rated Heating Capacity (BTU/h) - 10,500

Cooling Power Input (Watts) 1465 1465

Heating Power Input (Watts) - 1200

Rated Current Cooling (Amperage) 13 13

Rated Current Heating (Amperage) - 10.6

Noise Level (dBA) - H/M/L 55/53/51 55/53/51

Air Flow - H/M/L (CFM) 235/205/175 235/205/175

Product Dimensions (W” x H” x D”) 17.75 x 33.125 x 17.125 17.75 x 33.125 x 17.125

Product Weight (Lbs) 80 80

Refrigerant Type R-410A R-410A

Reference Number KY-100E1 KY-100E1HP

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk

of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must

be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If a test is performed and the indicator light remains ON, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Powered by Gree Customer Service for trou-

bleshooting recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

PRODUCT DIAGRAM

Control Panel

Carry Handle

Air Outlet &

Louvers

Power Cord

Upper Air Intake

Lower Air Intake

Air Exhaust Vent

Filter

Location

PARTS & WINDOW KIT ASSEMBLY

PARTS

EXHAUST HOSE & ADAPTERS

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the window kit and exhaust hose must be installed.

When the unit is operating in fan mode, the window kit and exhaust hose do not need to be installed .

MOUNTING THE EXHAUST HOSE

• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

• Extend both ends of the exhaust hose approximately 6 inches.

• Screw the REAR and FRONT Exhaust Hose Adapters onto each end of the exhaust hose. Once both

adapters are attached, attach the Window Kit Adapter to the REAR Exhaust Hose Adapter.

• Connect the FRONT Exhaust Hose Adapter to the back of your portable air conditioner.

• Attach the Window Kit Adapter to the window kit.

• For maximum efficiency bend the exhaust hose as little as possible once installation is complete.

Window Kit Adapter

Exhaust HoseRear Exhaust Hose

Adapter

Front Exhaust Hose

Adapter

Sliding Panels (3)

SINGLE HOSE WINDOW KIT INSTALLATION

When installing the exhaust hose, try and keep it as flat as possible. The less angles and bends

in the hose, the better the unit will perform. If bending or an angle is necessary, use single 90°

angles like the pictures above. Multiple bends will decrease performance and efficiency

This installation is OK The is a poor installation

22”

26”

CONTROL PANEL

SG-PAC-12E1

SG-PAC-12E1HP

MODE BUTTON

TEMP SELECT BUTTONS

POWER BUTTON

BUCKET FULL LIGHT

COOL MODE LIGHT DRY MODE LIGHT

FAN MODE LIGHT

LED DISPLAY

MODE BUTTON

TEMP SELECT BUTTONS

POWER BUTTON

COOL MODE LIGHT

HEAT MODE LIGHT FAN MODE LIGHT

LED DISPLAY

DRY MODE LIGHT

CONTROL PANEL FUNCTIONS

CONTROL PANEL OPERATING INSTRUCTIONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes:

Air Conditioner, Dehumidifier (DRY), Fan only, and Heater mode (NOTE: Heater mode is only available

on the SG-PAC-12E1HP). Each press of the MODE button will light up a different mode icon on the con-

trol panel. The exhaust hose and window kit must be installed when the unit is in Air Conditioner,

Dehumidifier (DRY), or Heater (SG-PAC-12E1HP only) mode. When using the unit as a fan, it is not

necessary to keep the exhaust hose and window kit connected to the unit.

3) Temperature - Select the desired temperature by pressing either ▼or ▲ key when using the unit in

Cooling or Heating (SG-PAC-12E1HP only) mode. The digital thermostat will display the set temperature.

4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water will

collect in a backup water tank located inside the unit. The Bucket Full icon (SG-PAC-12E1) or Heat Mode

icon (SG-PAC-12E1HP) will light up if this occurs. The unit will then beep 8 times and the LED display

will show “H8”. The compressor will now shut off. You should now drain the excess water from the unit.

To do this, get a small pan and place it under the drain plug on the bottom of the back of the unit. Remove

the plug and slightly tilt the unit backwards to drain the water into the pan.

REMOTE CONTROL OPERATING INSTRUCTIONS

Press the ON/OFF (POWER) button once to manually

turn the unit on. Press the Power button once more to

turn the unit off.

NOTE: Heat Mode is only

available on SG-PAC-12E1HP

Press the MODE Button repeatedly to cycle between the

different modes.

When the unit is in Air Conditioner or Heater (SG-PAC-

12E1HP) mode you can select your desired temperature.

Press the TEMP SELECT buttons (+or -) to select

your desired temperature setting. The temperature on the

LCD display on the remote control will increase or de-

crease accordingly. Hold the +/- buttons for two seconds

to rapidly increase or decrease the temperature. Temp.

range is 61°F—86°F.

Press the Fan Speed button to change fan speeds.

Fan Speeds:

NOTE: When the unit is in Dehumidifier (DRY) mode,

the fan speed is not adjustable.

Press the Up and Down Swing Button to turn on and off

the vertical swing mode. In vertical swing mode, the lou-

vers will rotate up and down to circulate more air.

When the unit is off, press the Up and Down Swing But-

ton and “+” at the same time to enable stationary swing

mode. Stationary Swing mode allows for more control

over the way the louvers swing up and down. The Swing

icon on the Remote LCD will blink twice when this is

Blinks for 2 Seconds

In Stationary Swing mode, press the Up and Down

Swing Button to change the swing pattern per below:

Disable Stationary Swing Mode by pressing the Up and

Down Swing Button and “+” button at the same time.

The Swing Icon on the Remote LCD will blink twice

when this is disabled.

REMOTE CONTROL

MODE MODE BUTTON

ON/OFF ON/OFF BUTTON

FAN FAN BUTTON

- / + - / + BUTTONS

Vertical Swing BUTTON

AUTO

COOL

DRY

FAN

HEAT

Low Speed Medium Speed

High Speed

SIGNAL TRANSMITTER

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air GM-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air PH1-14R-03 Bedienungsanleitung

Soleus Air

Soleus Air WCM1-08E-01 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air WS1-15E-02 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air WM1-12E2-01 Bedienungsanleitung

Soleus Air

Soleus Air KY-32E Bedienungsanleitung

Soleus Air

Soleus Air WM1-15E-01 Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air WM1-06E-01 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 NT Bedienungsanleitung

Soleus Air

Soleus Air SPTAC-09H Bedienungsanleitung

Soleus Air

Soleus Air TTWM1-10-01 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air Mobile Comfort KY-80G Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Soleus Air

Soleus Air PE1-09R-30 Bedienungsanleitung

Soleus Air

Soleus Air KY2-34 Bedienungsanleitung

Soleus Air

Soleus Air PH1-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PAC12 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung