Sper scientific 800034 Bedienungsanleitung

Heat Stress Monitor

Datalogging

Heat Stress Monitor

800034 & 800035

Instruction Manual

Heat Stress Monitor 800034 &

Datalogging Heat Stress Monitor 800035

Sper Scientic

Printed in the USA

The contents of this manual may not be reproduced

or transmitted in any form or by any means electronic,

mechanical, or other means that do not yet exist or may

be developed, including photocopying, recording, or

any information storage and retrieval system without the

express permission from Sper Scientic.

TABLE OF CONTENTS

1. INTRODUCTION . . . . . . . . . . . . . . . . . 4

2. FEATURES . . . . . . . . . . . . . . . . . . . . 5

3. MATERIALS SUPPLIED . . . . . . . . . . . . . 5

4. FRONT PANEL DESCRIPTION & LCD DISPLAY .6

6. MONITOR SETUP + ALARM SETUP . . . . . . 8

8. APPENDIX - DATALOGGING (800035) . . . . . 11

Monitor Setup . . . . . . . . . . . . . . . . . . . 12

Software Installation . . . . . . . . . . . . . . .14

Datalogger Settings . . . . . . . . . . . . . . . . 17

Data Sampling & Recording . . . . . . . . . . .22

Downloading Data . . . . . . . . . . . . . . . .24

9. TROUBLESHOOTING . . . . . . . . . . . . . . 27

10. SPECIFICATIONS . . . . . . . . . . . . . . .27

11. WARRANTY . . . . . . . . . . . . . . . . . . . 28

INTRODUCTION

Large display continually monitors temperature, RH & all

heat stress indicators: TA (Air Temperature), RH, Heat

Index, Dew Point, Wet Bulb

Government organizations such as OSHA have set

recommended heat stress limits for various activities.

Continually monitor all heat stress indicators. Both models

recall min/max RH & temperature. 800034 provides visual

& audible alarms for user selectable hi/lo temperature &

RH thresholds, while 800035 provides visual & audible

alarms for user selectable hi/lo temperature thresholds.

Datalogging Model records up to 32,000 data points that

can be downloaded using the USB cable and software that

come with the unit. Both models include 4 AAA batteries

and stand on a desk-top or wall mount.

An AC Adaptor is included with Datalogger 800035 and

available as an optional accessory for Monitor 800034.

FEATURES

• Displays readings of TA (Air Temperature), RH,

heat index, dew point, wet bulb, month and date

calendar, and time on a large LCD display

• Easy-to-understand icons

• Recalls minimum and maximum readings

• Visual & Audible Alarms

• Desktop or wall mount capability

MATERIALS SUPPLIED

• Monitor

• Instruction Manual

• AAA Batteries (4)

• USB Cable (800035 only)

• AC Adaptor (800035 only)

• CD (USB Driver and Datalogger Software) (800035 only)

FRONT PANEL DESCRIPTION & LCD DISPLAY

1. POWER - Power on/o󰀨, enter setting mode

2. MODE - Min/Max

3. SEL/R - Change Value /

enter Key Start mode (800035 only)

4. TRH/M - Select Mode

5. UNIT - Change Temp. Unit

6. REC/ALRM LIGHTS

7. Air Temp - Ambient Temperature (°C / °F selectable)

8. Alarm indicator:

Upper Bell: Temperature alarm is set

Lower Bell: RH alarm is set

9. Humidity: Relative Humidity

10. Selectable parameters: Heat Index, Dew Point (DPT),

WBT (Wet Bulb Temp) - (All units °C / °F selectable)

11. H M : Hour: Minute / M D : Month: Day

MONITOR SETUP (800034)

Monitor Setup: Date and Time

1. Turn the unit on.

2. Press POWER and MODE to enter Setup Mode.

3. The day of month will ash on the LCD. Press SEL/R

to increase the number and press TRH/M to decrease

the number.

4. Press UNIT to save the selection and move to the

next setting.

5. The month will ash. Press SEL/R to increase the

number and press TRH/M to decrease the number.

6. Press MODE to save the selection and move on

to the next setting.

7. The hour will ash. Use SEL/R and TRH/M to select

the current hour.

8. Press UNIT to save the selection and move to the

next setting.

9. The minutes will ash. Use SEL/R and TRH/M to

select the current minute.

10. Press POWER and MODE to save the selection.

Temperature / RH Alarm - ON/OFF

1. Press MODE and UNIT to switch the alarm on and o󰀨.

By pressing MODE and UNIT again, you can cycle through

the options of :

a. Temperature (only) On (Upper Bell)

b. RH (only) On (Lower Bell)

c. Temperature & RH On (Both Bells)

4. All alarms o󰀨

Temperature Hi/Lo Alarm Settings

1. Press SEL/R and POWER to enter Settings

2. Press MODE to switch between editing Hi and Low

3. Press SEL/R to increase the number and press

TRH/M to decrease the number.

4. Press UNIT to select a di󰀨erent digit.

5. Press SEL/R and POWER to save the selection.

RH Hi/Lo Alarm Settings

1. Press TRH/M and POWER to enter Settings

2. Press MODE to switch between editing Hi and Low

3. Press SEL/R to increase the number and press

TRH/M to decrease the number.

4. Press UNIT to select a di󰀨erent digit.

5. Press TRH/M and POWER to save the selection.

Min/Max Readings Recall

1. Press MODE, max reading of temperature &

humidity appear.

2. Press MODE again for the minimum reading of

temperature & humidity

Note...

The minimum & maximum readings are taken while the

unit has been on.

3. To reset min/max values unit must be turned OFF.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 840012 Bedienungsanleitung

Sper scientific

Sper scientific 800052 Bedienungsanleitung

Sper scientific

Sper scientific 840065 Bedienungsanleitung

Sper scientific

Sper scientific 850026 Bedienungsanleitung

Sper scientific

Sper scientific 800048 Bedienungsanleitung

Sper scientific

Sper scientific 860032 Bedienungsanleitung

Sper scientific

Sper scientific 850023 Bedienungsanleitung

Sper scientific

Sper scientific 850081 Bedienungsanleitung

Sper scientific

Sper scientific 800046 Bedienungsanleitung

Sper scientific

Sper scientific 850097 Bedienungsanleitung

Sper scientific

Sper scientific 850007 Bedienungsanleitung

Sper scientific

Sper scientific 800111 Bedienungsanleitung

Sper scientific

Sper scientific 840081 Bedienungsanleitung

Sper scientific

Sper scientific 300056 Bedienungsanleitung

Sper scientific

Sper scientific 840087 Bedienungsanleitung

Sper scientific

Sper scientific 840063 Bedienungsanleitung

Sper scientific

Sper scientific 800047 Bedienungsanleitung

Sper scientific

Sper scientific 850025 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850046K Bedienungsanleitung

Sper scientific

Sper scientific 840064 Bedienungsanleitung

Sper scientific

Sper scientific CL-2006 Bedienungsanleitung

Sper scientific

Sper scientific 850069 Bedienungsanleitung

Sper scientific

Sper scientific 300037 Bedienungsanleitung

Sper scientific

Sper scientific Large Display Salinity Pen - 850036 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung