Sper scientific CL-2006 Bedienungsanleitung

CHLORINE METER

Model : CL-2006

Your purchase of this Free and Total CHLORINE METER marks a

step forward for you into the field of precision measurement.

Although this CHLORINE METER is a complex and delicate

instrument, its durable structure developed. Please read the

following instructions carefully and always keep thismanual

within easy reach.

OPERATION MANUAL

TABLE OF CONTENTS

FEATURES. ................................................................1

SPECIFICATIONS.......................................................2

FRONT PANEL DESCRIPTION. ................................. 4

MEASURING PROCEDURE. ...................................... 5

4-1

Measurement.........................................................6

4-2

Free/Total Chlorine mode selection........................ 7

4-3

Data Hold............................................................... 7

4-4

Data Record ( Max., Min. reading ). ....................... 9

CALIBRATION

PROCEDURE…………….………………………………..9

BATTERY REPLACEMENT…………………………….10

1. FEATURES

•

The meter measures the Free and Total chlorine ( CL )

between 0.00 to 3.50 ppm ( mg/L ).

•

The measuring method is an adaptation of the

USEPA Method 330.5 for waste water and Standard

Method 4500-Cl G for drinking water.

•

The advanced optical system based on a special

narrow band LED lamp that allows most accurate and

repeatable reading.

•

User friendly and powerful calibration functions are

able to validate the performance of your meter at any

time.

•

1.00 ppm Free standard solution and 1.00 ppmTotal

standard solution are included as standard

accessories.

•

The unique optics structure, enables the instrument to

read with high resolution : 0.01 ppm ( mg/L ).

•

Splash waterproof on the front panel.

•

Jumbo LCD, easy readout.

•

Microprocessor circuit assures maximum

possible accuracy, provides special functions

andfeatures.

•

Battery operated for field and on-sitetesting

convenience.

•

Data hold function for freezing the desired valueon

display.

•

Records Maximum and Minimum reading with Recall.

•

Heavy duty & compact housing with hard carrying case,

designed for easy carry out & operation.

•

Auto shut off feature to save battery life.

•

Applications : Test swimming pool, municipal water,

food and beverage water, or other aqueous solution

where fluid clarity is important.

2. SPECIFICATIONS

Display

LCD size : 41 mm x 34 mm

Range

Free chlorine ( CL ) :

0.00 to 3.50 ppm ( mg/L ).

Total chlorine ( CL ) :

0.00 to 3.50 ppm ( mg/L ).

Resolution

0.01 ppm ( mg/L ).

Accuracy

± 0.02 ppm ( mg/L ).

@ 1.00 ppm ( mg/L )

Light source

LED, 525 nm.

Light detector

Photo diode

Method

The measuring method is an adapta-

tion of the USEPA Method 330.5 and

Standard Method 4500-Cl G.

Note: The reaction between free (

total ) chlorine and the DPD reagent

cause a pink tint in the sample.

Response time

Less than 10 seconds.

Sample volume

10 mL.

Data Hold

Freeze the display reading.

Memory Recall

Maximum & Minimum value.

Display

Samplin

Time

Approx. 1 second.

Power off

Auto shut off saves battery life or

manual off by push button.

Calibration

points

Zero chlorine.

1.00 ppm ( Free chlorine ).

1.00 ppm ( Total chlorine ).

Operating

Temperature

0 to 50 ℃.

Operating

Humidity

Less than 85% R.H.

Power Supply

DC 1.5 V battery ( UM4, AAA ) x 6 PCs,

or equivalent.

Power Current

Stand by

Approx. DC 4 mA.

Testing

Approx. DC 12 mA.

Weight

320 g/0.70 LB. @ Battery isincluded.

Dimension

155 x 76 x 62 mm

( 6.1 x 3.0 x 2.4 inch)

Accessories

Included

•Instruction manual………………….1 PC

•1.0 ppm Free Chlorine standard

solution, CF-01……………………..1 PC

•1.0 ppm Total Chlorine standard

solution, CT-

01……………………………..….….1 PC

•Zero Chlorine standard solution,

CL-01…………………………....….1 PC

•Empty testing bottle…………….....2 PCs

•Clean

cloth………………………………...1 PC

•Free Chlorine DPD powder……..10 PCs

•

Total Chlorine DPD powder……..10 PCs

Optional

Accessories

•Free Chlorine DPD powder

( 10 PCs ), Model : CFP-10

•Total Chlorine DPD powder

( 10 PCs ), Model : CTP-10

•Empty testing bottle, Model : 0601

•1.0 ppm Free Chlorine

standard solution, Model :

CF-01

•1.0 ppm Total Chlorine standard

solution, Model : CT-01

•Zero Chlorine standard solution,

Model : CL-01

3. FRONT PANEL DESCRIPTION

3-1 Test Chamber Cover

3-2 Test Chamber

3-3 Display

3-4 Hold Button ( Esc Button )

3-5 TEST/CAL Button

3-6 Power Button

3-7 ZERO Button

3-8 REC Button ( MAX, MIN Button )

3-9 Battery Compartment/Cover

3-10 Free Chlorine 1.0 ppm standard solution.

3-11 Total Chlorine 1.0 ppm standard solution

3-12 Zero Chlorine standard solution

3-13 Empty testing bottle 1

3-14 Empty testing bottle 2

3-15 Clean Cloth

3-16 Free Chlorine DPD powder ( 10 PCs )

3-17 Total Chlorine DPD powder ( 10 PCs )

4. MEASURING PROCEDURE

4-1 Measurement

Before the measurement, you should set the

measurement mode to " Free Chlorine " or " Total

Chlorine ". For setting procedure, refer to chapter

4-3, page 8.

Power ON the meter by pressing the Power Button once.

The display will show " Free ( TOTAL ) " for approx. 1 second.

then show " CAL 0 ". The meter is now ready for the ZERO

setting procedures.

Fill the measurement liquid into the testing bottle.

Note :

Be sure to fill the

testing bottle to the

top of the 10ml line.

Open the test camber cover and insert the testing

bottle into the test chamber. Make sure the testing

bottle is seated fully and oriented correctly. The

white mark on the bottle should point towards the

white mark on the test chamber. Close the cover.

Note :

Be sure orient the

testing bottle into

the test chamber

correctly.

ZERO setting for the liquid

Press the Zero Button once, the display will flash

( TEST ) , then show " 0.00 ".

Open the test chamber cover and remove the testing

bottle.

Open the testing bottle an add the DPD powder to the

testing bottle. Shake the bottle for at least 10 seconds.

Note :

•For the Free Chlorine measurement, it should

use the " Free Chlorine DPD powder ".

•For the Total Chlorine measurement, it should

use the " Total Chlorine DPD powder ".

Wait approximately one minute, then insert the

testing bottle into the testing chamber.

Press the Test Button once, the display will flash

( TEST ) , wait approximately 10 seconds, then the

display will show the measurement value.

After the testing, you should wash the

Testing Bottle with Distilled Water.

Washing the Testing bottle

4.2 Free/Total Chlorine mode selection

With the meter in the off condition, Press and hold the

Hold Button and the REC Button at the same time.

Without releasing the Hold & REC buttons, press the

Power Button. The unit will enter the selection mode to

select Free Chlorine or Total Chlorine.

Press the TEST Button to select the desiring function

( Free Chlorine or Total Chlorine ), then press the

REC Button to confirm and save theselection mode

into the memory.

Note :

•For the swinging pool application, it is typical to

select the Free Chlorine function.

•Fortheindustrialwaterpollutionapplication,

typical to select the Total Chlorine function.

4.3 Data Hold

1) During the measurement, pressing the Hold Button

once will hold the measured value & will display a

HOLD symbol.

Note: Press the Hold Button once again will release the

data hold function.

4.4 Data Record ( Max. , Min. reading)

Note: The data record function only records the

maximum and minimum readings.

Press the REC Button once to start the data record

function and there will be a REC symbol on the

display.

While REC function is active:

1) Press the REC Button once, the REC MAX symbol

along with the maximum value will appear on the

display.

Note: If you want to delete the maximum value, press

the Hold Button once, then the display will return to

the REC symbol only.

2) Press the REC Button again, the REC. MIN symbol

along with the minimum value will appear on the

display.

Note: If you want to delete the maximum value, press

the Hold Button once, then the display will return to

the REC symbol only.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850023 Bedienungsanleitung

Sper scientific

Sper scientific 840007 Bedienungsanleitung

Sper scientific

Sper scientific 800046 Bedienungsanleitung

Sper scientific

Sper scientific 850068 Bedienungsanleitung

Sper scientific

Sper scientific 800058 Bedienungsanleitung

Sper scientific

Sper scientific 300056 Bedienungsanleitung

Sper scientific

Sper scientific 800047 Bedienungsanleitung

Sper scientific

Sper scientific 800012 Bedienungsanleitung

Sper scientific

Sper scientific 840010 Bedienungsanleitung

Sper scientific

Sper scientific 800019 Bedienungsanleitung

Sper scientific

Sper scientific 300058 Bedienungsanleitung

Sper scientific

Sper scientific 850014 Bedienungsanleitung

Sper scientific

Sper scientific 860055 Bedienungsanleitung

Sper scientific

Sper scientific 850004 Bedienungsanleitung

Sper scientific

Sper scientific 840015 Bedienungsanleitung

Sper scientific

Sper scientific 300107 Bedienungsanleitung

Sper scientific

Sper scientific 840081 Bedienungsanleitung

Sper scientific

Sper scientific 840029 Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 840062 Bedienungsanleitung

Sper scientific

Sper scientific 840011 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850034K Bedienungsanleitung

Sper scientific

Sper scientific 850011 Bedienungsanleitung

Sper scientific

Sper scientific 800021 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung