Sper scientific 840029 Bedienungsanleitung

DIGITAL SOUND LEVEL METER

840029

Instruction Manual

CONTENTS

I. Introduction............................................................................. 3

II. Panel Description ................................................................... 3

III. Operating Instructions

A. Measuring Procedure ....................................................... 4

B. Settings for General Applications ..................................... 4

C. Signal Output.................................................................... 4

D. Calibration......................................................................... 4-5

E. Precautions....................................................................... 5

F. Battery Replacement ........................................................ 5

IV. Specifications ......................................................................... 6

Frequency Weighting (A and C) Characteristics.................... 7

Response (Fast and Slow) Characteristics............................ 7

V. Warranty ................................................................................. 8

- 2 -

I. INTRODUCTION

Perfect for testing for OSHA requirements, your new instrument meets

IEC 61672 class 2 and ANSI S1.4 type 2 frequency and time weighting

specifications, DIN 45633 and JIS 1502.

It covers the 30 ~ 130 dB in the "A" scale, and 35 ~ 130 dB in the "C"

scale, with an accuracy of ±1.5 dB. This meter can be acoustically

calibrated in compliance with OSHA, using Sper Scientific's Acoustical

Calibrator 840031 (or equivalent).

Features include a built-in calibration adjustment, Fast or Slow time

weightings, Maximum Hold function, large display with a resolution of

0.1 dB, low battery indicator, and AC or DC output. The instrument

has a fold out tripod stand and comes with carrying case, instructions,

II. PANEL DESCRIPTION

Overload indicator

Power selector

Range selector

Microphone

Display

Calibration Adjustment

Weighting selector (A or C)

Response selector (Slow/Fast/Max Hold)

Signal Output terminal

- 3 -

III. OPERATING INSTRUCTIONS

A. MEASURING PROCEDURE

 Slide the POWER selector to the ON (AC) or ON (DC) position.

 Slide the WEIGHTING selector to the "A" or "C" position. The "A"

frequency weighting simulates human ear response. During an

environmental sound level measurement, select the "A" weighting.

The "C" weighting approximates a flat response. Typically, "C" is

used to check the noise of machinery where the target sound level

is already known. (See Frequency Weighting Characteristics,

page 7.)

 Slide the RESPONSE selector to the FAST or SLOW position.

For general applications, select FAST, which simulates the human

ear's response time. The SLOW setting is used to obtain an

average of vibrating sound levels.

 Find the appropriate measuring range using the RANGE selector.

If the OVERLOAD INDICATOR (a triangle shape) appears in the

upper-left display, slide the RANGE selector to another setting.

 Point the microphone at the sound source, the sound level will be

displayed in decibels (dB).

 To power off the unit, slide the POWER selector to the OFF

position.

B. SETTINGS FOR GENERAL APPLICATIONS

 Set POWER selector to an ON position.

 Set RESPONSE selector to Fast.

 Set WEIGHTING to "A".

 Set RANGE selector to the appropriate range.

C. SIGNAL OUTPUT

 The 3.5 mm diameter SIGNAL OUTPUT terminal may be used to

connect the unit to an external output device, such as an analyzer,

recorder, or controller.

 When connecting meter with an external output device, use the

appropriate ON selection (AC or DC).

D. CALIBRATION

The meter's CALIBRATION ADJUSTMENT is located on the front

panel. The meter has a built-in internal standard of 94 dB/1 KHz. Use

the following procedures to calibrate the instrument before operating

for the first time, or when the meter has not been in use for awhile.

- 4 -

Internal Calibration:

 Slide the POWER selector to an ON position.

 Slide the RANGE selector to the 50 ~ 100 dB position.

 Slide the RESPONSE selector to FAST.

 Slide the WEIGHTING selector to CAL.

 Use the calibration screw driver to gently turn the CALIBRATION

ADJUSTMENT until the display reads 94.0 dB.

External Calibration:

Use Sper Scientific's Acoustical Calibrator 840031 (or equivalent) to

calibrate the unit, including the microphone, in compliance with OSHA.

 Slide POWER selector to an ON position.

 Power on the acoustical calibrator and place the calibrator onto the

Sound Level Meter's MICROPHONE.

 Slide the RANGE selector to the 50 ~ 100 dB position.

 Slide the RESPONSE selector to FAST.

 Slide the WEIGHTING selector to "A".

 Use the calibration screw driver to gently turn the CALIBRATION

ADJUSTMENT until the display reads 94.0.

E. PRECAUTIONS

 Do not store or operate the unit in high temperatures or in a

high humidity environment for long periods.

 Keep the microphone dry and avoid intense vibrations.

 Do not force the CALIBRATION ADJUSTMENT, doing so may

damage the mechanism and void the warranty.

F. BATTERY REPLACEMENT

Replace the battery when "BAT" is displayed. Accurate measurements

may be made for several hours after the low battery indicator appears.

- 5 -

Display 3 1/2 digits, 3/4" LCD

Functions dB ( A and C Frequency Weighting),

Response (Fast, Slow),

Max. Hold

AC/DC Output

Measurement Range 30-70 dB, 60-100 dB, and 90-130 dB

40 dB on each step, with overload indicator

Resolution 0.1 dB

Accuracy ± 1.5 dB

Frequency 31.5 Hz to 8,000 Hz

Microphone 1/2" condenser microphone.

Response (Fast/Slow) Fast (F): t = 200 ms

Slow (S): t = 500 ms

Internal Calibration Built-in internal calibration on front panel.

Internal 94 dB / 1 kHz square wave generator

Output Signal AC: 0.5 Vrms corresponding to each range

step. DC: 0.3~1.3 VDC, 10 mV per dB.

Output impedance is 600 ohm.

Output Terminal 3.5 mm diameter phone jack

Operating Temp. 32~122°F (0~50°C)

Operating Humidity Less than 90% RH

IV. SPECIFICATIONS

Power Supply One 9V battery, heavy duty or alkaline type

Power Consumption Approximately DC 6 mA

Weight 10 oz.

Dimension 81/8" x 3 1/8" x 1 3/8"

Included Accessories Instruction Manual, 9V battery, calibration

screw driver, and hard carrying case

Optional Services &

Accessories

840029C NIST Traceable Cert. of Calibration

840031 Acoustical Calibrator

840091 Wind Screen

CE Compliant Yes

- 6 -

FREQUENCY WEIGHTING (A and C) CHARACTERISTICS

Frequency dB A dB C Tolerance dB

31.5 -39.4 -3.0 ± 5.0

40 -34.6 -2.0 ± 4.5

50 -30.2 -1.3 ± 4.0

63 -26.2 -0.8 ± 3.5

80 -22.5 -0.5 ± 3.0

100 -19.1 -0.3 ± 2.5

125 -16.1 -0.2 ± 2.0

160 -13.4 -0.1 ± 2.0

200 -10.9 0 ± 2.0

250 -8.6 0 ± 2.0

315 -6.6 0 ± 2.0

400 -4.8 0 ± 2.0

500 -3.2 0 ± 2.0

630 -1.9 0 ± 2.0

800 -0.8 0 ± 2.0

1000 0 0 ± 2.0

1.25k 0.6 0 ± 2.0

± 2.5

1.6k 1.0 -0.1 ± 3.0

- 2.5

2k 1.2 -0.2 ± 3.5

- 3.0

2.5k 1.3 -0.3 ± 4.0

- 3.5

3.5k 1.2 -0.5 ± 4.5

4k 1.0 -0.8 - 4.0

5 0.5 -1.3 ± 5.0

- 4.5

6.3 -0.1 -2.0 ± 5.5

- 5.0

8 -1.1 -3.0 ± 6.0

- 5.5

RESPONSE (Fast and Slow) CHARACTERISTICS

Fast Reading is maximum value at 0.2 seconds

Slow Reading is maximum value at 1.5 seconds

- 7 -

FIVE YEAR WARRANTY

Sper Scientific warrants this product against defects in materials and

workmanship for a period of five years from the date of purchase, and

agrees to repair or replace any defective unit without charge. If your

model has since been discontinued, an equivalent Sper Scientific

product will be substituted if available. This warranty does not cover

damage resulting from accident, misuse, or abuse of the product. In

order to obtain warranty service, ship the unit postage prepaid to:

SPERSCIENTIFICLTD.

7720 East Redfield, Suite 7, Scottsdale, Arizona 85260

(480) 948-4448, www.sperscientific.com

Please Note: The defective unit must be accompanied by a description of the problem and your

return address. Please be sure to return your warranty registration card within ten (10) days of

purchase.

- 8 -

Rev. 6/24/11

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 840029 Bedienungsanleitung

Sper scientific

Sper scientific 850071 Bedienungsanleitung

Sper scientific

Sper scientific 860040 Leitfaden

Sper scientific

Sper scientific 800050 Bedienungsanleitung

Sper scientific

Sper scientific 300001 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 840080 Bedienungsanleitung

Sper scientific

Sper scientific 860032 Bedienungsanleitung

Sper scientific

Sper scientific 900019 Bedienungsanleitung

Sper scientific

Sper scientific 300058 Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 850015 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 840046 Bedienungsanleitung

Sper scientific

Sper scientific 800019 Bedienungsanleitung

Sper scientific

Sper scientific 800058 Bedienungsanleitung

Sper scientific

Sper scientific 850001E Bedienungsanleitung

Sper scientific

Sper scientific 850026 Bedienungsanleitung

Sper scientific

Sper scientific 800046 Bedienungsanleitung

Sper scientific

Sper scientific 800100 Bedienungsanleitung

Sper scientific

Sper scientific 850069 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung