StarTech.com SATBP125VP Bedienungsanleitung

Manual Revision: 04/12/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/SATBP125VP.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

SATBP125VP

2.5” SATA Drive Mobile Rack for 3.5”

Bay - Anti-Vibration

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Product diagram ....................................................................................1

Front view .................................................................................................................................................... 1

Rear view...................................................................................................................................................... 1

Application photo..................................................................................................................................... 2

Package contents ...................................................................................2

Requirements .........................................................................................3

Install a drive into the drive tray..........................................................3

Install the mobile rack...........................................................................4

Remove a hard drive from the drive tray ...........................................4

About the LED indicators......................................................................5

Technical support...................................................................................6

Warranty information............................................................................6

Instruction manual

Product diagram

Front view

Power/activity LED

Release latch Lock

Anti-vibration

bumper

Anti-vibration

bumper

Rear view

Anti-vibration

bumper

Anti-vibration

bumper

Anti-vibration

bumper

Anti-vibration

bumper

15-pin SATA

power connector

7-pin SATA

data connector

Door

Instruction manual

Application photo

Drive tray Drive

(not included)

Mobile rack

Package contents

• 1 x mobile rack

• 1 x drive tray

• 2 x keys

• 1 x SATA cable

• 4 x drive-mounting screws

• 4 x mobile-rack mounting screws

• 1 x quick-start guide

Instruction manual

Requirements

• 1 x 2.5” SATA HDD

• Computer or server with a 3.5” drive bay

• Power supply with a SATA connector

• Screwdriver

The SATBP125VP is OS independent and doesn’t require any additional drivers or

software.

Requirements are subject to change. For the latest requirements, please visit

www.StarTech.com/SATBP125VP.

Install a drive into the drive tray

Warning! You should handle hard drives carefully, especially when you’re transporting

them. If you’re not careful with your drives, you may lose data as a result. Always

handle storage devices with caution. Make sure that you’re properly grounded

by wearing an anti-static strap. If an anti-static strap isn’t available, touch a large,

grounded metal surface for several seconds to discharge any built-up static electricity.

1. If the drive tray is locked, insert one of the provided keys in the lock and turn the

key clockwise.

2. Squeeze the release latch and pull the door on the drive tray open.

3. Slide the drive tray out of the mobile rack.

4. Slide the drive into the side of the drive tray and line up the mounting holes in the

drive tray with the mounting holes in the drive.

5. On the underside of the drive tray, use a screwdriver to insert the drive-mounting

screws through the drive tray and into the drive, and tighten the screws in place.

6. Carefully slide the drive tray into the mobile rack.

7. Close the door on the drive tray.

Warning! If you encounter resistance when you try to close the door, do not try to

force the door to close. Remove the drive tray and make sure that you are inserting

it in the right direction. If you force the door closed, you could damage the HDD

connectors on the drive and/or the mobile rack.

8. To lock the door on the drive tray, insert one of the provided keys in the lock and

turn the key counterclockwise.

Instruction manual

Install the mobile rack

Warning! Make sure that you’re properly grounded by wearing an anti-static strap

when you install any computer component. If an anti-static strap isn’t available, touch

a large, grounded metal surface for several seconds to discharge any built-up static

electricity.

1. Turn o your computer and any devices or peripherals that are connected to it.

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your computer.

4. Open your computer case and remove the cover from an empty 3.5” drive bay.

For more information about how to do this, consult the documentation that came

with your computer system.

5. Insert the mobile rack into the drive bay slot, making sure that the screw holes on

the side of the mobile rack line up with the holes in the drive bay slot.

6. Use the mobile-rack mounting screws to attach the mobile rack.

7. Connect the provided SATA cable to the SATA data connector on the mobile rack

and to a SATA data port on the computer motherboard or a SATA controller card.

8. Connect a SATA power connector to your computer’s power supply and to the

SATA power connector on the mobile rack.

9. Place the cover back onto your computer case.

10. Reconnect the power cable to the back of your computer.

11. Reconnect any devices or peripherals that were connected to your computer.

12. Turn on your computer.

Remove a hard drive from the drive tray

Warning! Do not remove a drive if the power/activity LED is blinking.

1. If the door on the drive tray is locked, insert one of the provided keys in the lock

and turn the key clockwise.

2. Squeeze the release latch and pull the door on the drive tray open.

3. Slide the drive tray out of the mobile rack.

Instruction manual

4. On the underside of the drive tray, use a screwdriver to remove the drive-

mounting screws from the drive tray and drive.

5. Slide the drive out of the drive tray.

About the LED indicators

The SATBP125VP features a power/activity LED located on the front of the drive tray.

LED behavior Signicance

The LED is illuminated blue The mobile rack is receiving power and

the drive is powered up.

The LED is blinking blue The drive is being accessed.

Instruction manual

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship

for the periods noted, following the initial date of purchase. During this period,

the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Inhaltsverzeichnis

Andere StarTech.com Gehäuse Handbücher

StarTech.com

StarTech.com SAT3540U3ER Systemhandbuch

StarTech.com

StarTech.com S2510U33RUSM Bedienungsanleitung

StarTech.com

StarTech.com S252BU313R Bedienungsanleitung

StarTech.com

StarTech.com MADE EASY HSB110SATBK Bedienungsanleitung

StarTech.com

StarTech.com S2510BMU33 Systemhandbuch

StarTech.com

StarTech.com SAT3540ER2 Bedienungsanleitung

StarTech.com

StarTech.com SATSAS225ODD Bedienungsanleitung

StarTech.com

StarTech.com RK2620WALHM Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe IDECASE35U2 Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe IDECASE25OTG Bedienungsanleitung

StarTech.com

StarTech.com SAT3540U2E Bedienungsanleitung

StarTech.com

StarTech.com S3510BMU33ET Bedienungsanleitung

StarTech.com

StarTech.com RK1219WALHM Bedienungsanleitung

StarTech.com

StarTech.com SAT2510U2F Bedienungsanleitung

StarTech.com

StarTech.com S2510PESAT Bedienungsanleitung

StarTech.com

StarTech.com 2TBT3-PCIE-ENCLOSURE Bedienungsanleitung

StarTech.com

StarTech.com RK1219WALL Bedienungsanleitung

StarTech.com

StarTech.com S352BU33HR Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe Bedienungsanleitung

StarTech.com

StarTech.com S354UFER Bedienungsanleitung

StarTech.com

StarTech.com HSB13SATSASB Bedienungsanleitung

StarTech.com

StarTech.com INFOSAFE IDE2510U2 Bedienungsanleitung

StarTech.com

StarTech.com SAT2510B12U3 Bedienungsanleitung

StarTech.com

StarTech.com S251BPU31C3 Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung