STEINDORFF NYMC0035000C Bedienungsanleitung

STEINDORFF®

NYMC0035000C

Comparison Microscope

Operating Instructions

A. Features and Functions

Through optical enlargement, this comparison microscope, can help the user to observe

clearly, by looking into the same eyepiece set, the images in both the right and left imaging view

fields, and compare two or more objects effectively in cutting, joining or overlapping view fields.

Due to its powerful magnification, this instrument enables the user to perceive the differences

between very small similar objects.

Model NYMC0035000C Comparison Microscope is a new generation product of our long-

time experience and technical innovation. With our success in solving the technical problem of the

adjustability of its comparison line width, which has been listed as one of the national technical

secrets, its quality has, therefore, reached the international advanced standard.

Model NYMC0035000C is our improved product on Model NYMC0035000A. It not only

has all the technical properties of Model NYMC0035000A, but also offers better image quality

and higher magnification. With more illuminating modes, more attachments, better shape and

structure, it therefore performs a superior work.

This model is an ideal instrument for police stations, procuratorial organs and courthouses to

identify finger prints, shot marks, tool traces, seals and writings, and for colleges and universities

to use for educational purposes as well. It is also suitable for banks, archeological studies,

electronics researches, biological science and agriculture.

STEINDORFF®

B. Main Technical Parameters

eyepiece

general magnifying

power

imaging view field

(mm)

objective

visual inspection

photo-taking

video-recording

working

distance

10X/Φ18

25X/Φ6..96

16X/Φ11*

interface magnification

interface

magnification

0.44X

0.64X

bridge

magnific

ation

1.2X

7.7X/Φ23.4

19.2X/Φ8.9

12.3X/Φ14.3

1.9X/12.6×18.9

actual measured

value

100mm

1.0X

12X/Φ15

30X/Φ5.7

19.2X/Φ9.17

3X/8×12

1.6X

19.2X/Φ9.4

48X/Φ3.6

30.7X/Φ5.73

4.8X/5×7.5

2.5X

30X/Φ6

75X/Φ2.3

48X/Φ3..67

7.5X/3.2×4.8

4.0X

48X/Φ3.8

120X/Φ1.4

77X/Φ2.3

12X/2×3

0.4X(attached objective)and 0.64X objective、10X eyepiece combination，general amplification power 3.1X，

ocular imaging view field Φ60mm

Note: The mark * means the attachment is optional.

Picture 1

STEINDORFF®

1. video interface

2. photography interface

3. eyepiece

4. binocular head

5. pull lever

6. separation line knob

7. bridge body

8. adjustment knob

9. magnification handle

10. clamping knob

11. stand

12. elevating knob

13. base

14. stage handle

15. luminescence regulator

16. main switch

17. coarse focus knob

18. level reaction knob

19. level stage

20. rotatable stage

21. power box

22. luminescence lens

23. light pipe

24. universal luminescence stand

25. separation line window

26. locking screw

27. tiltable stage

28. polarized light device

29. 0.3X objective

30. bullet holder

31. transmission illuminator

32. coaxial light

33. CCD tube

34. camera tube

35. wave filter base

36. magnification reticle

C. Installation and Operation

See Picture 1 for the assembled microscope.

1. Put the stand (11) on a working table of the suitable height, fix the bridge body (7) in its

groove and tighten it with the clamping knob (9).

2. Then loosen the locking knob (26), take off the dust cover and fix the binocular head (4)

with the locking knob (26);

STEINDORFF®

3. Remove the dust cover from the binocular head (4) and fit the wanted eyepiece in its place;

4. Plug one end of the power line into the socket on the base (13) and the other end into a

socket of good grounding connected with a 220V power source. Connect all the other lines as

required;

5. With all the above done, the instrument is ready for use now. A sheet of paper is to be

placed on the two stage plates (20), turn on the main switch (16) and the light, adjust the focus

knob (17) and look at the sheet on the stage plates (20) through the eyepieces (3). The clear

observation can be obtained by working up or down the elevating knob (12).

The user is supposed to know clearly about the different functions of the different mechanical

parts and also about the operating procedures before turning the instrument into the working best

conditions.

D. Function and Operation

1. Operation of the Stage: The stage moves with the adjustment of the handle (14) and its

plate (20) can make a 3600 rotation. The plate (27) can incline to a certain degree and the two

stages interact with each other with the turning of the reaction knob (18).

2. Focus: Turning the focus knob (17) can move the two stages up and down. The elevating

knob enables them to move either upwards or downwards respectively.

3. Adjustment of the Light: The 24V150W luminescence light spot can be adjusted by turning

the luminescence lens (22) and its holder can also be regulated to the desired position. Adjusting

the lamp stand (24) affects different light angles. Adjusting the regulator (15) controls the intensity

of the light. The wave filter base (35) can hold a wave filter or polarizer. If the bulb does not work,

replace it with a new one.

4. Function, Regulation and Operation of the Separation Line: The separation line is thin,

black and straight, as is shown in Picture 4. If it appears as is shown in Picture 2 or Picture 3, this

means the line has changed out of shape, and needs adjusting in the following way: Remove the

STEINDORFF®

dust cover, insert the screw driver that goes along with the machine into the groove within the

bridge body and carefully regulate the line by watching through the eyepiece and turning the driver

slightly until it shapes as is shown in Picture 4. If it is like the line in Picture 3, adjust the left

screw. Turning the separation line knob (6) can move the comparison line continuously to have a

single, cutting or overlapping view field. When in the mode of overlapping view field, different

color filters applied to the right and left filter base will improve the result.

5. Choice and Adjustment of Magnification: The right and left objectives in use must have

the same magnification. Turning the magnification handle (9) changes their magnification power.

If the user wishes to have a bigger view field, just fit 0.3X objectives into the interfaces under the

objective group and re-adjust.

In order to put the right and left objectives in strictly the same magnification, the user must

adjust the magnification as follows:

Put the magnification reticles (36) on the right and left stage plates (20). Look through the

eyepiece at the scales images and focus until the two images are equally clear. Move the reticles

and make the reticle scales match with each other. If the right and left magnification is different,

Picture 2

The black and white lines

are too thick.

Picture 3

The black line shows

different widths at

both ends.

Picture 4

The line is a thin

straight black line.

STEINDORFF®

the reticle scales cannot match respectively. In such cases, the user can slightly turn the right or

left magnification handle (8) and the right objective magnification until all the scales match well.

Picture 5 shows the right scales images of the right and left magnification reticles. The same

procedure must be followed if the user changes the magnification of the objectives.

Picture 5 shows the desired match of all the scales in the view field.

6. The Correct use of the Binocular Head: The movement of the head (4) can change the exit

interpupillary distance to suit the user. Turning the spiral cap can adjust the vision effect. The user

is able to see clearly the desired line shown in Picture 4 by turning this cap.

7. Photo-Taking and Video-Recording: The machine can play the two roles simultaneously.

With the regulation made, the user pulls out the lever (5) and the instrument is ready for either

photo-taking or video-recording. After the camera is fixed into the interface (2) inside the tube

(34), the user observes through the viewfinder and slightly regulates the field until it is right for

taking pictures. The right length of time for exposure can be found through practice. If the image

taken with a camera is to be seen at the same time on a monitor display, the user must fit a pick-

up head, tube (33), video line and monitor to the video interface (1), and put the tube (33) in the

STEINDORFF®

correct position showing clearly both the comparison line and the target object. For the best

recorded results, the user is supposed to refer to the various instructions of all the above mentioned

parts for the correct adjustment.

8. Application of Polarized Light, Coaxial Light and Transillumination: Polarized light works

better for the examination of traces like scratches. The user fits such polarized light devices as

polarizer or analyzer to the lower end of the objectives and to the luminescence lens (22), then

adjust the light, turn the polarizer or analyzer to change the angle for the best illumination result.

Coaxial light better suits the revelation of objects like deep holes or smooth surfaces. The

user fits the coaxial light (32) into the screw socket below the objectives and then adjust the

illumination angle.

Some objects like negatives, transparencies or translucencies, call for transillumination. The

user can put the transilluminators (31) on the stage plates (20), adjust the light angle and make

transillumination.

9. Power Supply: The power supply unit is fixed inside the base. If power failure occurs, first

check the fuse behind the base (13). If it is a circuit fault, please send for a professional technician

or ask this company for help.

E. Attachments

We offer plenty of attachments for our customers. Please see the packing list.

F. Maintenance

1. This instrument must be kept in a shady and cool place, dry and well-ventilated. It must be

free from dust, acid or alkali vapor. When not in use, it should be covered with a dustcover.

2. All the lens must be kept clean. If there is dust on the surface, it can be flicked off by an air

blower or a soft hairbrush; if some greasy dirt gathers on the surface, it can be swept off

by lens tissue slightly moistened with xylene.

STEINDORFF®

3. The user is not supposed to disassemble the instrument. In case of disorder, send it back to

the producer for service.

Inhaltsverzeichnis

Andere STEINDORFF Mikroskop Handbücher

STEINDORFF

STEINDORFF NYMCS-310 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-605 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-320 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-702 Bedienungsanleitung

STEINDORFF

STEINDORFF S-VM300 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-603 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-620 Bedienungsanleitung

STEINDORFF

STEINDORFF CX SERIES Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-615 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-342 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-237 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMC38000 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-931 Bedienungsanleitung

STEINDORFF

STEINDORFF S-1260 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-1500 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-290 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-1701 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-343 Bedienungsanleitung

STEINDORFF

STEINDORFF SPMM Bedienungsanleitung

STEINDORFF

STEINDORFF S-340 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-VM2000N Bedienungsanleitung

STEINDORFF

STEINDORFF S-271 Bedienungsanleitung

STEINDORFF

STEINDORFF CX50 Series Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-360 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung