Swissvoice ESense Bedienungsanleitung

Cordless analogue telephone (DECT)

WITH MONOCHROME DISPLAY

eSense

User manual

Photo may differ from the actual product.

Welcome to Swissvoice

The eSense is a cordless telephone designed for connection to an analog telephone

network. International DECT (GAP)-standard digital technology offers excellent voice

quality.

You can register up to 5 handsets to your base and make internal calls free of charge.

Please read these operating instructions carefully to familiarise yourself with and take

full advantage of the benefits of your new eSense.

eSense

Contents

Keys 2

Display symbols 3

Range / Location 3

Battery advice 4

Insert the battery 4

Connecting the phone 5

Set date and time 5

Set language 5

Telephoning 6

Keypad lock 7

Redial 7

PBX operation 7

Paging – Locate mislaid handsets 8

Phonebook 8

Direct memory 9

Calls list 9

Extending the eSense 10

Telephoning with several call partners 11

Personal settings 12

Advanced settings 13

Appendix 14

eSense

eSense 1

Handset

Base

eSense

2eSense

1 Earpiece

2 Display

3 Redial key / Mute / Delete / Back

4 Menu/OK key

5 Talk key / R-key (Flash): press twice

6 Open calls list / increase volume /

scroll up in lists and menus

7 Handsfree

8 Key 1: Insert a space

9 Digit keys

10 Star key

In standby: Long press to activate/

deactivate the keypad lock.

11 Microphone

12 Hash key

switches between lower and upper

case letters / switches ringer on/off /

press and hold when editing an entry:

insert a pause

13 Open phonebook / decrease volume /

scroll down in lists and menus

14 Internal key

15 End call key / back to idle mode

1 Paging key

Keys

714

Display symbols

Steady on: batterie’s charge level.

Flashing: batteries have to be charged.

Time.

Call in progress.

Steady on : the caller’s list is open.

Flashing : new calls in the caller’s list.

The phonebook is open.

Scroll up/down in a list or a menu.

Confirmation.

Ringer off.

Handsfree active.

Alarm is set.

Steady on, when the handset is near the base. Flashes, if out of range or

not registered.

Range / Location

To obtain the best possible range, we recommend positioning the telephone in a

location central to your sphere of activity. Avoid positioning the telephone in niches,

recesses and behind steel doors.

The maximum range between base station and handset is approximately 300 meters

outdoors. Depending on the surrounding conditions as well as spatial and structural

factors, the range may be smaller. Silent zones can occur due to the digital transmis-

sion in the frequency range used – even within the range, depending on the structural

environment. In this case the transmission quality may be reduced through the

increased incidence of short breaks in transmission. Normal call quality can be

restored if you move slightly out of the silent zone. If the range is exceeded, the call

will be disconnected unless you move back into range within ten seconds.

12:03

eSense

eSense 3

eSense

4eSense

Battery advice

Use only the original battery (Li-Ion 3.7 V / 550 mAh) as well as the original power sup-

ply (6.5 VDC, 300 mA or 7.5 VDC, 200 mA).

The handset operating times (standby 150 hours/active 10 hours) and charging times

apply only if the battery is charged to the defined minimum capacity.

Charging is electronically controlled to ensure optimal charging and care of battery in

different charge states. Full capacity is achieved only after several charging cycles.

Insert the battery

The battery compartment is situated in the

handset.

Open the handset cover.

Insert the battery in the battery compartment.

Replace the handset cover.

Note:

Using other rechargeable battery or non-rechargeable battery/primary cells

can be dangerous and cause malfunctions or damage to the telephone. Do

not short-circuit the battery (danger). In particular, avoid inadvertent short-

circuits during storage and transport e.g. bunch of keys, metal panels or

similar objects, and make sure the battery do not come into contact with

greasy materials. When not in the handset, therefore, battery should be

stored only in insulating packaging. Ensure also that the contacts do not

touch greasy parts.

Rechargeable battery can become warm while recharging. This is a normal

occurrence and is not dangerous.

Connecting the phone

• Before you can start using your telephone you must plug in the telephone

connector cable and the mains cable.

• When the phone is delivered, the battery is not yet charged.

• To charge the battery, insert the handset in the base station. The battery will take

around 8 hours to fully charge (initial charge).

Set date and time

After setting up the telephone first, date and time are not set.

• Press , select

Clock/Alarm

with the navigation key (up/down) and

press .

• Select

Date&Time

and press .

• Enter date and press .

• Enter the time and press .

Set language

• The language of the display texts can be changed in the menu:

Personal set/Language

eSense

eSense 5

Telephone line socketMains power socket

Telephoning

• Dial the desired number using the keypad.

• Press the Talk key .

End the call

Press the End call key .

Accepting a call

• Incoming calls are signalled by a ring tone and a quick flashing of the control LED

on the handset.

• Press the Talk key and conduct your conversation.

End the call

Press the End call key .

Switch ringer off

When a call is coming in, press and hold the key for approx. 3 seconds. The ringer

is switched off for this call.

Set speaker/loudspeaker volume

You can adjust the speaker/loudspeaker volume during a conversation.

Set the desired volume using the navigation key (up/down) .

Switch handset off

• Press and hold the End call key (approx. 5 sec).

• Press and hold again the End call key to reactivate the handset.

Set alarm

• Press , select

Clock/Alarm

using the navigation key (up/down) and

press .

• Select

Set alarm

using the navigation key (up/down) and press .

• Select the desired alarm function (e.g. On once), enter the alarm time and press

Calls cannot be made if the battery is almost discharged or the handset is

out of range of the base station.

eSense

6eSense

Set alarm tone

• Press , select

Clock/Alarm

using the navigation key (up/down) and

press .

• Select

Alarm tone

using the navigation key (up/down) and press .

• Select the desired alarm melody and press .

The activated alarm is displayed in standby mode by .

The alarm sounds for 60 seconds or can be deactivated immediately by pressing

any key.

Keypad lock

Activate keypad lock

• Press approx. 3 sec. All keys are locked.

Deactivate keypad lock

• Press approx. 3 sec.

Redial

The Redial list contains up to 10 entries.

• Press and select the desired entry using the navigation key

(up/down).

• Press the Talk key.

Edit redial list

• Open the Redial list, press .

You have the following options:

- Save Number

– Add number to the phonebook.

- Delete

– Delete the entry.

- Delete All

– Delete the entire redial list.

PBX operation

Your telephone is designed for use in the analogue telephone network and can be

operated on a PBX that supports DTMF dialling and flash signalling. To enter the R key

(e.g. needed to establish a connection) press the Talk key twice.

You can adjust the flash/recall time for key R (see chapter "Advanced settings").

eSense

eSense 7

Paging – Locate mislaid handsets

All registered handsets ring for one minute, when the Paging key on the base is

pressed. To stop the ring press the End call key on the handset or the Paging key on

the base.

Phonebook

You can store up to 100 names and numbers in the phonebook on each handset.

Digits / Characters

Different characters are printed on each key. The entries in the phonebook are sorted

alphabetically.

Key #Change from upper case to lower case letters (ABC/abc).

Press and hold key to insert a pause inside a phone number (“P” appears).

Key 1Insert a space.

Add new entries in the phonebook

• Press , select

Phonebook

and press .

• Select

New entry

and press .

• Enter the desired name, number and group melody and press after

each input.

Edit phonebook

• Press , select

Phonebook

and press .

• Select

List entry

and press .

• Select the desired entry using the navigation key (up/down) or enter the first letter

of the name and press .

• Select

Edit entry

and press .

• Edit the entry and press .

In the phonebook menu you have the following options:

- New entry

- List entry

- Delete all

- Direct mem

- Call a programmed direct memory number.

- PB Transfer

– Copy phonebook to another handset.

eSense

8eSense

Andere Handbücher für eSense

Inhaltsverzeichnis

Andere Swissvoice Schnurloses Telefon Handbücher

Swissvoice

Swissvoice Eurit 266 Bedienungsanleitung

Swissvoice

Swissvoice Avena 267 Bedienungsanleitung

Swissvoice

Swissvoice Eurit 595 Bedienungsanleitung

Swissvoice

Swissvoice Aeris 146 Bedienungsanleitung

Swissvoice

Swissvoice Aeris 126 Bedienungsanleitung

Swissvoice

Swissvoice Avena 296T Bedienungsanleitung

Swissvoice

Swissvoice Aeris 156 Bedienungsanleitung

Swissvoice

Swissvoice XTRA 3355 Bedienungsanleitung

Swissvoice

Swissvoice ePure TAM Bedienungsanleitung

Swissvoice

Swissvoice Avena 266 Bedienungsanleitung

Swissvoice

Swissvoice Aeris 154 Bedienungsanleitung

Swissvoice

Swissvoice Avena 248TE Bedienungsanleitung

Swissvoice

Swissvoice Aeris 114 Bedienungsanleitung

Swissvoice

Swissvoice Aeris 246 Bedienungsanleitung

Swissvoice

Swissvoice Avena 247 Bedienungsanleitung

Swissvoice

Swissvoice Avena 347 Bedienungsanleitung

Swissvoice

Swissvoice Avena 286 Bedienungsanleitung

Swissvoice

Swissvoice Xtra 2155 Bedienungsanleitung

Swissvoice

Swissvoice eSense Bedienungsanleitung

Swissvoice

Swissvoice Avena 267 Bedienungsanleitung

Swissvoice

Swissvoice Avena 127 Duo Bedienungsanleitung

Swissvoice

Swissvoice Eurit 459 Bedienungsanleitung

Swissvoice

Swissvoice Eurit 535 Bedienungsanleitung

Swissvoice

Swissvoice Aeris 134 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung