Timeguard E269H-Synchronous Handbuch

Installation & Operating Instructions

20 Amp Electronic

24 Hour/7 Day

Time Controller

Model: E269H – Synchronous

11 Manual Control (Override)

The manual control is automatically annulled by the following

counteracting command of the automatic program sequence.

1 2

2 Surface Mounting

Lift the transparent cover off and remove the two screws.

Pull the clock body and then the terminal cover from the base.

Mount the base and connect from the diagram.

Flush Mounting

Cut panel opening 66 x 66mm, remove switch from base as above

connect from diagram. Mount on panel using bracket and two

knurled screws provided.

1 Fixing Instructions

Type Dials Power Reserve Switch Period Min Switching Contact Rating

E269H 24hr/7 day – 5 min/30 min 20 min/2hr 20(12)A

2 3

3 Circuit Diagrams – E269H

2 Surface Mounting

Lift the transparent cover off and remove the two screws.

Pull the clock body and then the terminal cover from the base.

Mount the base and connect from the diagram.

Flush Mounting

Cut panel opening 66 x 66mm, remove switch from base as above

connect from diagram. Mount on panel using bracket and two

knurled screws provided.

1 Fixing Instructions

4 Set Clock

Turn the hands of the clock either clockwise or anticlockwise to the correct time.

9.00

21.00

3 4

3 Circuit Diagrams – E269H

5 24 Hour Operation

SET SWITCHING TIME – lift off transparent cover and insert the

switching riders to the required position using red for ON and blue for OFF.

6 24 Hour ➔ 7 Day Programme

1 1

7 7 Day Programme

8 7 Day Operation

1 Lift off transparent cover and the outer ring to expose the yellow and

green circumferential bands around the clock face. The yellow refers

to 7 day movement,

2 Turn the clock hand either clockwise or anticlockwise to line up the slots

between the green and yellow bands.

3 Slide the silver pin to the yellow band.

4 Replace the outer ring in reverse locating the silver pin into any of the

recesses provided on the ring. The slots on the timing will also engage

into the raised edges provided.

5 You may align the days to suit, i.e. I = Monday, II = Tuesday etc.

6 SET SWITCHING TIME – Insert the switching riders to the required

position using red for ON and blue for OFF.

9 7 Day ➔ 24 Hour Programme

6 24 Hour ➔ 7 Day Programme

5 6

10 Programme Auto Manual

3.43.236 (Red) 3.43.237 (Blue)

10 Programme Auto Manual

11 Manual Control (Override)

The manual control is automatically annulled by the following

counteracting command of the automatic program sequence.

12 Permanent Control ON/OFF

Set the hand lever to “Perm” = permanent control; turning the control

axis 1 in direction of arrow, the required permanent control ON

and OFF can now be adjusted.

Turning the hand lever to “Auto” = Automatic control, the permanent

control is terminated. The actual switch position is maintained until the

next counteracting command of the automatic program sequence

is triggered. An immediate correction can be carried out by means

of the manual control (override control)

Replace transparent cover.

EU Directives: Conforms to latest directives.

Permanent ON/OFF

3.43.237 (Blue)

Zerofour – June 2015

67-056-65 (Issue 4)

Timeguard Limited.

Victory Park, 400 Edgware Road, London NW2 6ND

Sales Ofﬁce: 020 8452 1112

or email csc@timeguard.com

For a product brochure please contact:

HELPLINE

020 8450 0515

or email helpline@timeguard.com

www.timeguard.com

3 Year Guarantee

In the unlikely event of this product becoming faulty due to defective

material or manufacture within 3 years of the date of purchase,

please return it to your supplier in the first year with proof of purchase

and it will be replaced free of charge. For years 2 and 3 or any difficulty

in the first year telephone the helpline on 020 8450 0515.

Note: A proof of purchase is required in all cases. For all eligible replacements

(where agreed by Timeguard) the customer is responsible for all shipping/postage

charges outside of the UK. All shipping costs are to be paid in advance before

a replacement is sent.

Inhaltsverzeichnis

Andere Timeguard Controller Handbücher

Timeguard

Timeguard MTLW3000 Handbuch

Timeguard

Timeguard TLRX05 Handbuch

Timeguard

Timeguard RTS113 Programmierhandbuch

Timeguard

Timeguard TS900B Bedienungsanleitung

Timeguard

Timeguard MLB3000 Handbuch

Timeguard

Timeguard PDFMMINIL Handbuch

Timeguard

Timeguard SLB2300RF Handbuch

Timeguard

Timeguard MLSA360N Handbuch

Timeguard

Timeguard SLDD1000 Handbuch

Timeguard

Timeguard SLW360N Handbuch

Timeguard

Timeguard RTS113Q Programmierhandbuch

Timeguard

Timeguard SLFM360L Handbuch

Timeguard

Timeguard SLB2300 Handbuch

Timeguard

Timeguard MLB3000 Handbuch

Timeguard

Timeguard PDSM1500 Handbuch

Timeguard

Timeguard TRT039N Handbuch

Timeguard

Timeguard SLW360L Handbuch

Timeguard

Timeguard SLFM360N Handbuch

Timeguard

Timeguard PDFM1500N Handbuch

Timeguard

Timeguard ELU56 Handbuch

Timeguard

Timeguard SureTime STLW1000 Handbuch

Timeguard

Timeguard TRTD7N Handbuch

Timeguard

Timeguard TS900N Montageanleitung

Timeguard

Timeguard SLFM360 Handbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung