Tornado 95954 Handbuch

TORNADO INDUSTRIES, LLC

3101 WICHITA COURT

FORT WORTH, TX 76140

PHONE 800-VACUUMS

FAX 817-551-0719

WWW.TORNADOVAC.COM

Operations & Maintenance Manual

For Commercial Use Only

SINGLE AND DUAL EXTERNAL FILTER

ELECTRIC JUMBO VACUUM

MODEL NO: 95954/95960

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Long Term Buyer Protection Limited Warranty

10 Years*

Plastic water tanks and Rotationally-molded bodies

2 Years*

Parts on all Tornado cleaning equipment

1 Year*

Labor on all Tornado cleaning equipment

1 Year*

Warranty on batteries, one year prorated

All battery warranties are handled directly by the battery manufacturer, on a one year prorated basis

Tornado Industries, LLC. (Tornado) warrants to the end/user customer that the Tornado product(s) will

be free from defects in material and workmanship for the duration(s) described below. This limited

warranty DOES NOT cover machines and/or components subject to normal wear and tear, damage

that occurs in shipping, failures resulting from modication, accident, unsuitable operating environ-

ment, misuse, abuse, neglect, or improper maintenance by you. For full details, contact your Autho-

rized Tornado Distributor, Service Center, or the Tornado Technical Service Department. Tornado

sales and service representatives are not authorized to waive or alter the terms of this warranty, or to

increase the obligations of Tornado under the warranty.

Terms subject to change without notice

1. Except all Windshears™ Blowers, Storm, TV2SS, Side and Downdraft, Insulation Blowers, CV 30,

CV 38, CK14/1 PRO, CK 14/2 PRO, SWM 31/9, CK LW13/1, CK LW 13/1 ROAM, CV 38/48 Dual,

PV6, PV10, PV6 ROAM, Wall Mount Vacuum and all chargers are warranted for 1 (one) year for both

parts and labor.

2. All non-wear item parts purchased after warranty expiration are warranted for 90 days.

3. Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months after

the dealer purchased the unit from Tornado, whichever comes rst.

4. The EB 30 is warranted for a period of 90 days for both parts and labor.

5. The warranty on engines used on propane powered equipment is limited to motor manufacturer’s

warranty.

6. Ride-on Scrubbers are warranted for 24 months, parts, 6 months labor or 1,000 hours, whichever

occurs rst.

Note: Tornado, The Latest Dirt, Floorkeeper,

Carpetkeeper, Carpetrinser, Carpetrinser/Dryer,

Headmaster, Taskforce, PAC-VAC, T-Lite, Glazer,

Windshear, Max-Vac and Trot-Mop are trademarks

of Tornado Industries

Website: www.tornadovac.com

Phone 1-800-VACUUMS

Fax 817-551-0719

Address 3101 Wichita Court

Fort Worth, TX 76140

1-800-VACUUMS 90 Years of Cleaning Innovation A Tacony Company

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

NOTES

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least

resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an

equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that

is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or service person if you are in doubt as to whether the outlet is properly

grounded. Do not modify the plug provided with the appliance - if it will not t the outlet, have a proper outlet

installed by a qualied electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug

illustrated in sketch A.

Your new Tornado unit is a high quality, precision-made product. All parts used in the manufacturing of this unit

have passed rigid quality control standards prior to assembly. Please safeguard the original receipt / invoice. If

you experience any problems with your unit during the warranty period, the original receipt / invoice will act as

proof of purchase. Contact Tornado for any warranty inquiries.

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a combination of

common sense,staying alert and knowing how your unit works. Use this unit only as described in this manual.

Use only manufacturer’s recommended attachments. To reduce the risk of personal injury or damage to your

unit use only Tornado recommended accessories.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Features:

• Capable of simultaneous wet/dry pickup when using external lter(s)

• This unit is constructed for recovering water or other solutions without any adjustments.

• Liquid shutoffs are available.

• Ideal for materials from powder to oily metal chips.

• Recovers uids from water to medium weight oils.

• External lter(s) collect lighter particles and resist clogging.

• 55-gallon drum collects heavier waste (approximately 95% of all pickup); light particles collect in

large external lters.

• Known for high C.F.M. (cubic feet of air per minute) and moderate suction (static water lift).

General Specications

The Single and Dual External Filter Electric Jumbo Vacuums are heavy duty wet/dry industrial vacu-

ums. They pick up wet and dry waste simultaneously without the need to change any lters. Both

units are designed to t onto a 55-gallon rolled tip steel drum (Tornado part number 95944) for vol-

ume pick-up with maximum efciency. Heavier waste settles in the drum, while lighter particles

are trapped in the large external lters. The 2.25 h.p. vacuum motors create tremendous CFM for

pick-up power. Both units handle a wide variety of waste with ease, ranging from ne powders to

medium-grade viscosity products. Accommodates 1.5” to 3” hose and attachments, depending on

the model.

95954 SINGLE INCLUDES

98904 2.25 h.p. Vacuum Motor (1)

90378 Large Poly External Filter (1)

98049 Support Rod for Large Filter (1)

95944 55-Galon Drum

98088 4-Wheel Dolly

90331 1-1/2” Adaptor

Unit Specications

95960 DUAL INCLUDES

98904 2.25 h.p. Vacuum Motor (2)

90378 Large Poly External Filter (2)

98049 Support Rod for Large Filter (2)

95944 55-Galon Drum

98088 4-Wheel Dolly

90332 2” Adaptor

SINGLE DUAL

AMPS 15 15 (per head)

RPM 15,750 15,750 (per Head)

HORSEPOWER 2.25 2.25 (each head)

CFM [email protected]” hose 243@2” hose, 340@3” hose

STATIC WATER LIFT 51” 51”

EXTERNAL FILTER AREA 1874 sq. in. 1874 sq. in. (each head)

HORIZONTAL REACH 30 ft. 50 ft.

HOSE ADAPTOR 15.” included 2” included

POWER CORD 50ft. 14/3 50 ft. 14/3 (each head)

SHIPPING WEIGHT 84 lbs. 113 lbs.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

98904

95944

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

WARNING: Failure to read and understand these instructions could result in seri-

ous bodily injury or property damage

SAFETY INSTRUCTIONS

When using this unit, basic precautions should always be followed. Read all instructions before using

this unit.

WARNING: To reduce the risk of re, electric shock or injury:

Do not leave machine unattended when plugged in. Unplug from outlet when not in use or attempting

any maintenance or adjustment.

To avoid electrical shock, store indoors only.

Do not expose to rain.

Do not allow to be used as a toy.

Close attention is necessary when used near children.

Use only as described in this manual.

Use only manufacture’s recommended attachments.

Do not use with a damaged cord or plug.

If machine is not working as it should, has been dropped, damaged, left outdoors, or dropped into

water, return it to a service center.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp

edges or corners.

Do not run machine over cord.

Keep cord away from heated surfaces.

Do not unplug by pulling on cord. To unplug, grasp the plug not the cord.

Do not handle plug or machine with wet hands.

Keep hair, loose clothing, ngers, and all parts of the body away from openings and moving parts.

Turn off all controls before unplugging.

Connect to a properly grounded outlet only. See grounding instructions.

Do not put any object into openings. Do not use with any opening blocked. Keep openings free of

dust, lint, hair, and anything that may reduce air ow.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not pick up ammable or combustible liquids, such as gasoline, or use machine where they may

be present.

Do not use without lters in place.

Use extra care when cleaning on stairs.

Always replace worn or torn external lters immediately. This will prevent possible injury due to ying

objects.

Never operate with intake unguarded. Strong suction will pull ngers and/or clothing into blades and

other moving parts.

Always point exhaust port in a safe direction. Air exits blower at very high velocity.

Always wear safety glasses when in vicinity of this unit.

If unit is hand held, hold rmly when starting. High torque when starting will cause the unit to jerk

and cause injury and/or damage.

Use voltage and current listed on unit nameplate.

When not in use, coil motor cord and place on top of unit.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

ASSEMBLY OF THE UNIT MAINTENANCE

STARTING/STOPPING OF MACHINE

OPERATING RULES

1. Remove all components from packaging

2. Attach blower motor(s) to Jumbo cover adap-

tor rings by turning clockwise and locking into

place. Make sure exhaust nozzles(s) face

outward.

3. Install external lter support rod(s) by placing

them in access hole(s) located in the Jumbo

cover.

4. Attach external lter(s) by attaching to lter

support rod(s) and installing inlet collars onto

exhaust nozzle(s). Turn collars(s) clockwise

to lock. Do not twist lter.

5. Install hose adaptor into Jumbo housing.

Lock in place by lining up adaptor indent with

lock screw and tightening lock screw.

6. Place Jumbo cover assembly onto drum. The

weight and suction power of the Jumbo cover

assembly will form a seal onto the drum

1. Plug blower motor cord into a 20 Amp wall

outlet.

2. Start by turning ON/OFF switch located on

blower to the ON position.

3. Stop by turning ON/OFF switch located on

blower to the OFF position.

Use 1.5” to 3” hoses and attachments. 1.5”

attachments are not recommended for dual

model.

Use multiple 20 Amp outlets when using the Dual

Electric Jumbo.

Use to recover water, light weight oils, powders,

grindings, and metal shavings.

Extension cords must be equivalent or heavier

than the input cord(12/3), with a 50’ maximum

extension cord length.

BLOWER MOTOR

Damage to an armature invariably is caused by

permitting carbon brushes to become worn to

less that 1/4” in length. To prevent this from oc-

curring, inspect brushes after the rst 200 hours

of operation and frequently thereafter, replacing

when necessary. Failure to do so will nullify fac-

tory warranty.

To inspect brushes

1. Unplug power cord from outlet.

2. Remove the two screws located on the top

cover.

3. Pull back U-clip (coil spring) to release carbon

brushes.

4. Remove the two brushes and inspect for

length.

5. Replace if necessary.

Note: No other maintenance of motor should be

attempted during the rst year after purchase re-

fer to warranty). Any other type of service should

be performed by an authorized Tornado service

center.

EXTERNAL FILTER

For maximum operating efciency and to ensure

longer wear, remove lter(s) and empty by de-

taching the bottom clamp after every use

ALL OTHER MAINTENANCE

Empty and clean vacuum lter(s) and attach-

ments after each days use for maximum perfor-

mance

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Problem Remedy

Machine does not start Make sure power cord is plugged into a working receptacle.

Inspect for defective power cord.

Machine stops running

Make sure power cord is plugged into a working receptacle.

Check circuit breaker.

Inspect for armature brush wear.

Inspect for defective power cord.

Machine has no suction

Inspect for clogged or collapsed hose

Inspect for clogged motor intake.

Defective drum seal.

Material too heavy for unit.

Blower motor overheats

Inspect armature brushes for length (See Maintenance section).

Inspect for proper motor ventilation.

Inspect for proper extension cord size (12/3 minimum, 50’ maximum

length).

Machine has poor recovery

Inspect for correct size hose and attachments.

Defective drum seal.

Material too heavy for unit.

Inspect external lter(s). Empty and clean if necessary.

Inspect drum cover gasket.

Ensure blower motors are properly locked into Jumbo cover.

Inspect connection of external lters.

Inspect all seals for wear and/or damage.

TROUBLESHOOTING GUIDE

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Please provide additional information on

Tornado equipment: (Check choices below)

__ Automatic Scrubbers __Sweepers

__Propane Floor Machines __Rotary Floor Machine

__High Speed Burnishers __Carpet Vacuums

__Carpet Extractors & Spotters __Wet/Dry Vacs

__ Steam Cleaners __Jumbo Vacs

__Ride-On Equipment __Pressure Washers

See complete product info at www.tornadovac.com

Selling Dealer:(Required)__________________________

Warranty

Registration

Form

_____________________________________________________________________________

Company/Institution

_____________________________________ ____________________________________

Contact Name Title

_____________________________________ ____________________________________

Address City/State/Zip Code

_____________________________________ ____________________________________

Phone Fax

_____________________________________ ____________________________________

Date of Purchase Email

Please Print Clearly

See white metal plate or sticker on unit for this information.

MACHINE TYPE/MODEL NUMBER: MACHINE SERIAL NUMBER:

1. 1.

2. 2.

3. 3.

4. 4.

How did you rst learn about

Tornado cleaning and

maintenance equipment?

In square feet (meters)

Total Hard Floor Area

Total Carpeted Area

Square feet (square meters)

o Contacted by local dealer

o Previous experience with

Tornado products

o Reputation/

Recommendation

o Advertising

o Direct mail

o Internet

o Other

o 0-10,000 (0-930)

o 10-50,000 (930-4,650)

o 50-250,000 (4,650-23,250)

o Over 250,000 (over

23,260)

o 0-10,000 (0-930)

o 10-50,000 (930-4,650)

o 50-250,000 (4,650-23,250)

o Over 250,000 (over

23,260)

Damage or defect arising from abuse, neglect or other misuse is excluded from this warranty. Other items

may or may not apply based on your specic machine. If any defect occurs, the warranty is voided if service is

attempted by non-Authorized Tornado Service Centers.

X8449-TOR 1/2017

Facility Description (please circle all that apply)

1. School 9. Hospital 17. U.S. Govt.

2. Retail Store 10. Nursing Home 18. Other Govt.

3. Restaurant 11. Religious Institution 19. Auto Service

4. Ofce Building 12. Airport 20. Airport

5. Contract Cleaning 13. Warehouse 21. Non-Prot

6. Light Manufacturing 14. Apartment/Condo 22. Other (specify)

7. Heavy Manufacturing 15. Warehouse

8. College/University 16. Supermarket

Return to :

Tornado Industries

3101 Wichita Court

Fort Worth, TX 76140

Fax: 817-551-0719

or online at

www.tornadovac.com

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tornado Staubsauger Handbücher

Tornado

Tornado 125 Handbuch

Tornado

Tornado 93012B Handbuch

Tornado

Tornado CVD 30/1 Bedienungsanleitung

Tornado

Tornado CK 13/1-QD Bedienungsanleitung

Tornado

Tornado CA 6200 Bedienungsanleitung

Tornado

Tornado 95995 Bedienungsanleitung

Tornado

Tornado ExSELLerate Marathon 350 Handbuch

Tornado

Tornado Headmaster 97051 Handbuch

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado TV2 Handbuch

Tornado

Tornado TASKFORCE 98995 Bedienungsanleitung

Tornado

Tornado Marathon 350 98132 Handbuch

Tornado

Tornado CV 38/1 Bedienungsanleitung

Tornado

Tornado TO 2107 Bedienungsanleitung

Tornado

Tornado TOP5 Bedienungsanleitung

Tornado

Tornado TO420 Bedienungsanleitung

Tornado

Tornado B2000 Bedienungsanleitung

Tornado

Tornado 98699 Handbuch

Tornado

Tornado Coriolys SANS SAC Bedienungsanleitung

Tornado

Tornado 95961 Bedienungsanleitung

Tornado

Tornado TV2 SS Handbuch

Tornado

Tornado TASKFORCE 97060 CFV 10 Handbuch

Tornado

Tornado Rolfy 1055 Bedienungsanleitung

Tornado

Tornado Pac-Vac 6 Roam Handbuch

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung