Tornado B2000 Bedienungsanleitung
INTRODUCTION
Thank you for choosing Tornado Industrial Vacuum Cleaner, a high-quality product
based on the newest state-of-the-art technology. We hope that this device will be
to your satisfaction and meet your expectations. We are continuously striving to
improve our products in our product segment and will continue to supply the
market with new equipment.
NOTICE!
1.These instructions are only for the air scrubber B2000.
2. The air cleaner can only be used to collect dry, non-explosive materials. It is not suitable for
picking up liquids.
3. Please pay particular attention to the safety regulations and safety instructions
4. Read the complete instruction manual before using.
5. All spare parts and accessories used with this device must be those specified by Tornado.
6. Check before and after use that all the switches are in OFF position.
Environmental protection
The packaging material can be recycled. Please do not throw the packaging material into
household waste; please send it for recycling.
Old devices contain valuable materials that can be recycled; these should be sent for
recycling. Batteries, oil, and similar substances must not enter the environment. Please dispose
of your old devices using appropriate collection systems.
UNPACKING
When unpacking the machine, please check that the air cleaner has not been damaged in
transport
1. SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including
the following:
WARNING – To reduce the risk of fire, electric shock or injury:
Cables damaged through crushing or splitting can be dangerous if used and should be replaced
immediately. Risk of personal injury.
Do not connect the machine to an unearthed socket. Risk of personal injury
Make sure the assembly area is firm, so the air cleaner does not tip over. Risk of personal and
material injury.
Risk of pinching when handling the toggle fastener.
The machine must not be used in environments where explosive gases may be present. Serious risk
of explosion
The machine should be turned off at the switch before releasing the power lead from the wall
outlet. If the switch is in the on position, a spark can occur between the contact on the power lead
contact.
Remove the plug from the wall socket when carrying out maintenance work. Risk of personal
injury.
Dust that is hazardous to health can be spread when the coarse filter and the absolute filter are
replaced. Accordingly, the user should wear protective glasses, protective gloves, and a
breathing mask conforming to protection class FFP2
Do not puncture the absolute filer. Risk of dust dispersion.
SAFETY LABEL
The following label appears in front of the machine. Check all the details stated in the label
before using. Replace label if it is missing, becomes damaged or illegible. Failure to follow this
warning label may result in fire, electric shock or injury.
2. FUNCTION
Connect the power cord to the power outlet, attach the outlet hose if available. Start
the machine by pressing the start knob.
The air cleaner has two speeds. The air cleaner separates material in two stages: The first
stage uses a coarse filter. It capture the bigger particles and acts as protection for the
main filter. The coarse filter should be changed on a daily basis. The second HEPA filter
separates the unhealthy dust that is invisible to the eye.
Coarse filter characteristics
The coarse filter is strong and easy to change. It has low pressure drop and good
separation capability. The coarse filter takes care of big particles and acts as protection
for the absolute filter.
HEPA filter characteristics
The HEPA 13 filter is individually tested with efficiency >99.97@0.3um. It is dimensioned
for fine, dry dust and should be preceded by a pre-filter.
Caution
• The operating life of the absolute filter decreases and can be completely destroyed if
exposed to water.
Caution
• The absolute filters cannot be cleaned and must be replaced when full
Filter indicator
B2000 has two filter indicators connected to a warning light which measures the pressure
drop over the filter. If the pressure drop is too high, an orange lamp light up, indicating
that the filter is clogged and should be changed. Using the air cleaner when warning
light is showing will reduce the effectiveness of the machine. When the pressure drop is
too low, a red lamp will light up, indicating that the HEPA filter is leaking/puncture and
needs to be replaced immediately.
Fan
The air cleaner is equipped with a single, 1 phase fan
3. WARRANTY
All Tornado devices and accessories have a 12-month factory warranty counting from the
manufacturing date on the machine. Do not attempt to repair the suction apparatus
without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear,
negligence, defective use, unauthorized repair or the suction apparatus being connected
to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be
returned to us or our authorized representative for warranty examination and for any
warranty repair or replacement.
4. PROBLEM SOLVING
10. TECHNICAL DATA
Model
B2000
Power
610W
Voltage
230V
Current
2.9A
Power supply
1-phase
Airflow
2000 m3/h
Pre filter area
0.64m2
HEPA filter efficiency
H13, >99.97% @0.3um
HEPA Filter area
10.5 m2
Dimension
710X500X850mm
G.W
38kgs
Issue
Cause
Solution
The fan doesn’t start
No Power
Plug in machine
Cable defective
Replace cable
Switch defective
Replace switch
The fan stops immediately after
starting
Wrong fuse
Connect the correct fuse
The fan runs, but suction is poor
Filter clogged
Replace filter
Loose top cover
Adjust
Sealing defect
Change current seal
Dust blown from motor
Defective or loose filter
Adjust/Replace filters
Abnormal noise
Order service
Explosive view
S/N P/N Description Qty Dimension Note
1
S8065
B2000 Pre filter protect cover
1
2
S8064
B2000 Pre filter
1
3
C2326
B2000 Front frame cover
1
4
S8063
B2000 Hepa filter
1
5
C2328
B2000 inlet
1
6
S9035
Protective net for outlet
1
250
7 S9037 Buckle 4
8 C3051 B2000 Frame carbinet 1
9 S1056 Fan 1 450-600W
10 S1057 Sensor 2
11 C2327 B2000 fan fixed plate 1
12
S2009
Power cord
1
13
S9008
5’’ universal caster
4
5’’
14
C2330
B2000 caster holder
2
15
C2329
B2000 switch panel
1
16
S1052
Sound alarm
（
Red lamp
）
1
17
S1054
Switch
1
15A,3 speeds
18 S1053 Sound alarm(Orange lamp) 1
19 S1055 Power outlet 1
20 S1050 10A electrical outlet(for 230V version only) 1
21
S1038
Hour meter
1
Inhaltsverzeichnis
Andere Tornado Staubsauger Handbücher
Tornado
Tornado S15 Handbuch
Tornado
Tornado TO 6150 Bedienungsanleitung
Tornado
Tornado CK LW 13/1 Roam Bedienungsanleitung
Tornado
Tornado CK 13/1-QD Bedienungsanleitung
Tornado
Tornado PS Series Handbuch
Tornado
Tornado CK LW 13/1 Handbuch
Tornado
Tornado 95995 Bedienungsanleitung
Tornado
Tornado CK-14/1 PRO Handbuch
Tornado
Tornado 4000 SERIES Leitfaden
Tornado
Tornado TIV1000 Bedienungsanleitung
Tornado
Tornado Headmaster 97051 Handbuch
Tornado
Tornado 98699 Handbuch
Tornado
Tornado 93012B Handbuch
Tornado
Tornado TV2 Handbuch
Tornado
Tornado CK 3030 Produkthandbuch
Tornado
Tornado Pac-Vac 6 Roam Handbuch
Tornado
Tornado Rolfy 1055 Bedienungsanleitung
Tornado
Tornado 94220 Handbuch
Tornado
Tornado Pac-Vac 93016 Handbuch
Tornado
Tornado ExSELLerate Series Einrichtungshandbuch
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
