Tornado CK LW 13/1 Roam Bedienungsanleitung

TORNADO INDUSTRIES, LLC

3101 WICHITA COURT

FORT WORTH, TX 76140

PHONE: 800-VACUUMS

FAX: 817-551-0719

WWW.TORNADOVAC.COM

Long Term Buyer Protection Limited Warranty

10 Years*

Plastic water tanks and Rotationally-molded bodies

2 Years*

Parts on all Tornado cleaning equipment

1 Year*

Labor on all Tornado cleaning equipment

1 Year*

Warranty on batteries, one year prorated

All battery warranties are handled directly by the battery manufacturer, on a one year prorated basis

Tornado Industries, LLC. (Tornado) warrants to the end/user customer that the Tornado product(s) will

be free from defects in material and workmanship for the duration(s) described below. This limited

warranty DOES NOT cover machines and/or components subject to normal wear and tear, damage

that occurs in shipping, failures resulting from modication, accident, unsuitable operating environ-

ment, misuse, abuse, neglect, or improper maintenance by you. For full details, contact your Autho-

rized Tornado Distributor, Service Center, or the Tornado Technical Service Department. Tornado

sales and service representatives are not authorized to waive or alter the terms of this warranty, or to

increase the obligations of Tornado under the warranty.

Terms subject to change without notice

1. Except all Windshears™ Blowers, Storm, TV2SS, Side and Downdraft, Insulation Blowers, CV 30,

CV 38, CK14/1 PRO, CK 14/2 PRO, SWM 31/9, CK LW13/1, CK LW 13/1 ROAM, CV 38/48 Dual,

PV6, PV10, PV6 ROAM, Wall Mount Vacuum and all chargers are warranted for 1 (one) year for both

parts and labor.

2. All non-wear item parts purchased after warranty expiration are warranted for 90 days.

3. Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months after

the dealer purchased the unit from Tornado, whichever comes rst.

4. The EB 30 is warranted for a period of 90 days for both parts and labor.

5. The warranty on engines used on propane powered equipment is limited to motor manufacturer’s

warranty.

6. Ride-on Scrubbers are warranted for 24 months, parts, 6 months labor or 1,000 hours, whichever

occurs rst.

Note: Tornado, The Latest Dirt, Floorkeeper,

Carpetkeeper, Carpetrinser, Carpetrinser/Dryer,

Headmaster, Taskforce, PAC-VAC, T-Lite, Glazer,

Windshear, Max-Vac and Trot-Mop are trademarks

of Tornado Industries

Website: www.tornadovac.com

Phone 1-800-VACUUMS

Fax 817-551-0719

Address 3101 Wichita Court

Fort Worth, TX 76140

1-800-VACUUMS 90 Years of Cleaning Innovation A Tacony Company

WARNING: To reduce the risk of re, electric shock, damage or injury:

• Fully assemble vacuum before operating.

• Use and store in a dry location.

• Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual.

• Do not use charger with damaged cord or plug. If appliance or charger is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water, contact an Authorized Tornado service center for

service.

• Do not pull or carry charger by cord, use cord as a handle, close a door on the cord, or pull cord around

sharp edges or corners.

• Do not run appliance over cord.

• Keep cord away from heated surfaces.

• Do not unplug charger by pulling on cord. To unplug charger, grasp the plug, not the cord.

• Do not handle charger, including charger plug, and charger terminals with wet hands.

• Do not put any object into openings.

• Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air ow.

• Keep hair, loose clothing, ngers and all parts of the body away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

• Do not use without vacuum bag in place.

• Use extra care when cleaning on stairs.

• Do not use to pick up ammable or combustible liquids such as gasoline or use in areas where they may be

present.

• Do not attempt to service the unit while charger is plugged in.

• Do not charge the unit outdoors.

• Only charge in temperatures between 0-45ºC (32-113ºF).

• Do not open, crush, expose to heat above 100ºC (212ºF) or incinerate the battery even if it is severely dam-

aged. The battery can explode in a re.

• Use only with the Cordless Battery Vacuum Charger supplied - P/N 99131

• The battery and charger have no user serviceable parts.

• Batteries must be disposed of responsibly.

• Remove the battery before removing the bottom plate.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a combination of

common sense, staying alert and knowing how your unit works. Use this unit only as described in this manual.

Use only manufacturer’s recommended attachments. To reduce the risk of personal injury or damage to your

unit use only Tornado recommended accessories.

IMPORANT: The manufacturer cannot accept responsibility for damage caused when the appliance is

not used according to the instructions, or for uses other than those for which it was intended.

SAVE THESE INSTRUCTIONS.

POLARIZATION INSTRUCTIONS

Power Cord, 2-Wire Polarized Cord

This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the

other). This plug ts into the power outlet only one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should still fail to t, contact an electrician to replace

the obsolete outlet. Do not defeat the safety purpose of the polarized plug.

State of California

Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to

cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to

cause birth defects or other reproductive harm.

The model and serial number of this product may be found on the back side of the unit. You should

note the model and serial number of your unit in the spaces provided below, and retain this book as

a permanent record of your purchase.

Date of purchase

Serial number

Model number

Your new Tornado unit is a high quality, precision-made product. All parts used in the manufacturing of this unit

have passed rigid quality control standards prior to assembly. Please safeguard the original receipt / invoice. If

you experience any problems with your unit during the warranty period, the original receipt / invoice will act as

proof of purchase. Contact Tornado for any warranty inquiries.

For Best Performance

• Keep your vacuum clean and in good operating condition.

• Change vacuum bags when the bags are 2/3 full to maximize cleaning performance.

• Always use genuine vacuum bags and replacement parts. Use of other products may result in poor clean-

ing performance, potential vacuum cleaner damage and may void vacuum warranty. Genuine products are

designed for maximum cleaning performance.

• Store your machine carefully in a dry area.

• For optimum cleaning performance and safety, follow your owner’s manual instructions.

DESCRIPTION OF THE VACUUM

Key Replacement Parts

• Cleanbreeze disposable collection bags: 90039

• Belt: B014-0814B

• Battery: 98311

• Battery Charger: 99131

1 Ergonomic Handle

2 On/Off Power Switch

3 Bag Compartment

4 Vacuum Nozzle

5 Headlight

6 Furniture Guard

7 Handle Release Pedal

8 Battery Pack

9 Charge Point

10 Battery Life Display

11 Battery Release Button

12 Carry Handle

13 Charger

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 1 OF 4

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

0.250

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

1 OF 4

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 1 OF 1

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

1 OF 1

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

AS 20MAY15

SEE NOTES SEE NOTES

C223-2000

BATTERY CHARGER 50.4V DC

NOTES:

1. OUTPUT 50.4V DC, 1.5A

2. DC POWER CONNECTOR PLUG 2.5MM AND CABLE 47" LONG.

3 INPUT = AC 100-240V, 50/60Hz, 100VA.

4. AC CABLE 71" LONG W/ 2 PIN POLARIZED AMERICAN PLUG

5. PLUGS AND CABLES UL CERTIFIED.

6. CHARGER - UL1310 CERTIFIED

ASSEMBLING THE VACUUM

Attaching the Handle to the Vacuum

•NOTE: Do not turn on the vacuum until it is com-

pletely assembled.

• The vacuum cleaner and the handle are packed

separately and require assembly.

• Remove the handle bracket by removing the two

screws (Fig. 1).

• Place handle onto the back of the vacuum, aligning

holes with pegs (Fig. 2).

• Place the handle bracket back into position (Fig. 3).

• Secure with two screws removed in Fig. 1. Tuck the

cord into the space to the left of the handle.

• Open the bag compartment to ensure a vacuum bag

is in place.

• Your vacuum is now ready for use.

Charging Battery

• When you receieve your unit the battery is par-

tially charged and will run for a short time. To fully

charge the battery see Battery Charging section.

• The battery is located on the back of the vacuum.

It can be charged while installed on the vacuum, or

the battery can be removed from the vacuum and

charged independently (see removing and reinstall-

ing the battery (page 14).

• Plug the AC cable into the charger and into a wall

socket (Fig. 1).

• Plug the charger DC cable into the Charge Point on

the battery. (Fig. 2).

• The Charger LED light will be red during charging

and will turn green when the battery pack is fully

charged.

Fig. 1 Fig. 2

Fig. 3

Fig. 2

Fig. 1

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 1 OF 1

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. ITMAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

1 OF 1

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

AS 20MAY15

SEE NOTES SEE NOTES

C223-2000

BATTERY CHARGER 50.4V DC

NOTES:

1. OUTPUT 50.4V DC, 1.5A

2. DC POWER CONNECTOR PLUG 2.5MM AND CABLE 47" LONG.

3 INPUT = AC 100-240V, 50/60Hz, 100VA.

4. AC CABLE 71" LONG W/ 2 PIN POLARIZED AMERICAN PLUG

5. PLUGS AND CABLES UL CERTIFIED.

6. CHARGER - UL1310 CERTIFIED

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 1 OF 1

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

1 OF 1

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

AS 20MAY15

SEE NOTES SEE NOTES

C223-2000

BATTERY CHARGER 50.4V DC

NOTES:

1. OUTPUT 50.4V DC, 1.5A

2. DC POWER CONNECTOR PLUG 2.5MM AND CABLE 47" LONG.

3 INPUT = AC 100-240V, 50/60Hz, 100VA.

4. AC CABLE 71" LONG W/ 2 PIN POLARIZED AMERICAN PLUG

5. PLUGS AND CABLES UL CERTIFIED.

6. CHARGER - UL1310 CERTIFIED

Battery Life Display

• Press the button on the battery to illuminate the

LED lights.

• When the battery is fully charged there will be four

(4) green lights and one (1) red light showing (Fig.

3).

• As the battery is discharged, during use, the number

of green lights showing will reduce from four (4) to

none (0).

• When all of the green lights are off and only the red

light is showing, there is a small amount of time re-

maining before the battery will be fully discharged

and will require recharging.

Reclining the Handle

• Press the Handle Release Pedal located on the back

of the vacuum with your foot to recline the handle

(Fig. 4).

OPERATION

On/Off Switch

• Turn the switch On to use the vacuum. If the vacu-

um doesn’t turn on, check that the battery is charged

(see page 10).

• Always unplug the charger from the Charge Point

before use.

Edge Cleaning

The edge cleaning feature provides improved clean-

ing near walls and stationary furniture. For maximum

edge cleaning, place the left side of the nozzle, from the

user’s perspective, against the wall or stationary furni-

ture (Fig. 2).

Automatic Carpet Height Adjustment

Your vacuum is designed with an automatic self-

adjusting nozzle. No manual adjustments are required.

The height of the nozzle automatically adjusts to the

ooring surface. This self-adjusting feature allows the

nozzle to oat evenly over all ooring surfaces.

Fig. 4

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 3 OF 8

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

0.250

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

3 OF 8

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

Fig. 3

Fig. 1

Fig. 2

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 2 OF 8

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

0.250

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

2 OF 8

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

SEE DETAIL A

SCALE 0.500

DETAIL A

OPERATION

Bare Floor Cleaning

Your vacuum is equipped with a squeegee to improve

its effectiveness in cleaning bare oors (Fig. 1).

Vacuuming Under Furniture

Your vacuum will lay at on the oor for effective

cleaning under beds and tables.

• Press the Handle Release Pedal once for routine

vacuuming cleaning (Fig. 2).

• Continue to lower the handle to enable the vacuum

to lay at on the oor for cleaning under furniture

(Fig. 3).

Fig. 3

Fig. 1

Fig. 2

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 4 OF 8

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

0.250

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

4 OF 8

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DO NOT SCALE

UNLESS OTHERWISE SPECIFIED

DESCRIPTION

DRAWING SIZE:C

PART NUMBER

SHEET 3 OF 8

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

0.250

TACONY CORPORATION

1760 Gilsinn Lane, Fenton, MO 63026

DESCRIPTION OF CHANGE

REV

PART NUMBER

SHEET

3 OF 8

X.X .5 mm RADII X.X .5mm

X.XX .25mm X.XX .25mm

X.XXX .12mm MACHINE SURFACE

X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX

0 30" COMMON TO BE CONCETRIC TO .05mm

BYECN NODATEREV

MAINTENANCE AND CARE

Replacing the Vacuum Bag

NOTE: Turn the vacuum off and remove the battery.

• Unzip the bag compartment.

• Remove the used vacuum bag by pulling the green

bag collar tab away from the vacuum (Fig. 1). Slide

the used bag out of the bag holder which automati-

cally seals the bag opening (Fig. 2). Discard the

used bag.

• To install a new bag, slide the bottom of the green

bag collar into the bag holder until it “snaps” into

place (Fig. 3).

• Push the top of the bag collar upward until the col-

lar “snaps” into place on the vacuum (Fig. 4).

• Tuck the bag corners into the bag compartment,

then zip the bag compartment closed.

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DESCRIPTION

DRAWING SIZE:D

PART NUMBER

SHEET 1 OF 1

.02 IN RADII X.X ± .02

.01 IN X,XX ± .01

.005 IN MACHINE SURFACE

.0005 IN BREAK SHARP CORNERS TO .010 MAX

0 ° 30" COMMON TO BE CONCETRIC TO .002

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

678

Fig. 1

Fig. 2

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DESCRIPTION

DRAWING SIZE:D

PART NUMBER

SHEET 1 OF 1

.02 IN RADII X.X ± .02

.01 IN X,XX ± .01

.005 IN MACHINE SURFACE

.0005 IN BREAK SHARP CORNERS TO .010 MAX

0 ° 30" COMMON TO BE CONCETRIC TO .002

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

678

Fig. 3

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DESCRIPTION

DRAWING SIZE:D

PART NUMBER

SHEET 1 OF 1

.02 IN RADII X.X ± .02

.01 IN X,XX ± .01

.005 IN MACHINE SURFACE

.0005 IN BREAK SHARP CORNERS TO .010 MAX

0 ° 30" COMMON TO BE CONCETRIC TO .002

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

678

Fig. 4

MATERIAL

DRAWN

ISSUED

SCALE

FINISH

DATE

DESCRIPTION

DRAWING SIZE:D

PART NUMBER

SHEET 1 OF 1

.02 IN RADII X.X ± .02

.01 IN X,XX ± .01

.005 IN MACHINE SURFACE

.0005 IN BREAK SHARP CORNERS TO .010 MAX

0 ° 30" COMMON TO BE CONCETRIC TO .002

TACONY CORPORATION CLAIMS PROPRIETARY

RIGHTS IN THE MATERIAL DISCLOSED HERE IN.

THIS DRAWING IS ISSUED FOR ENGINEERING

INFORMATION ONLY. IT MAY NOT BE REPRO-

DUCED, NOR MAY THE INFORMATION HERE IN

BE USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM TACONY

CORPORATION.

1.000

678

Removing and Reinstalling the Battery

NOTE: Turn the vacuum off. If the battery charger is

plugged into the charge point on the vacuum,

remove the charger from the charge point before remov-

ing the battery.

The battery can be removed and charged independently

from the vacuum.

• To remove the battery push up on the release button

and lift the battery off (Fig. 1).

• To replace the battery, line up the bottom of the bat-

tery with the posts at the base of the coupling. Push

the battery in until it clicks (Fig. 2).

MAINTENANCE AND CARE

Fig. 1

Fig. 2

Inhaltsverzeichnis

Andere Tornado Staubsauger Handbücher

Tornado

Tornado CV 38/1 Bedienungsanleitung

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado Campus TO4560 Bedienungsanleitung

Tornado

Tornado CK 3030 Produkthandbuch

Tornado

Tornado Taskforce 17 Einrichtungshandbuch

Tornado

Tornado TASKFORCE 98995 Bedienungsanleitung

Tornado

Tornado 4000 SERIES Leitfaden

Tornado

Tornado Coriolys SANS SAC Bedienungsanleitung

Tornado

Tornado CK-14/1 PRO Handbuch

Tornado

Tornado 93012B Handbuch

Tornado

Tornado Campus TO4560 Bedienungsanleitung

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado Taskforce 15 Trot-Mop Handbuch

Tornado

Tornado Pac-Vac 6 Roam Handbuch

Tornado

Tornado 95995 Bedienungsanleitung

Tornado

Tornado 125 Handbuch

Tornado

Tornado CVD 30/1 Bedienungsanleitung

Tornado

Tornado Pac-Vac 6 Aircomfort Handbuch

Tornado

Tornado B2000 Bedienungsanleitung

Tornado

Tornado Rolfy 1055 Bedienungsanleitung

Tornado

Tornado Pac-Vac 93016 Handbuch

Tornado

Tornado TO 6150 Bedienungsanleitung

Tornado

Tornado CV 48/2 Bedienungsanleitung

Tornado

Tornado PS Series Handbuch

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch