TRENDnet TV-IP430PI Bedienungsanleitung

Andere Handbücher für TV-IP430PI

1

Inhaltsverzeichnis

Andere TRENDnet Sicherheitskamera Handbücher

TRENDnet

TRENDnet TV-IP262P Bedienungsanleitung

TRENDnet

TRENDnet SecurView Pro Bedienungsanleitung

TRENDnet

TRENDnet TV-IP751WIC Bedienungsanleitung

TRENDnet

TRENDnet TV-IP100-N Bedienungsanleitung

TRENDnet

TRENDnet TV-IP110 - SecurView Internet Surveillance... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP460PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP1328PI Bedienungsanleitung

TRENDnet

TRENDnet TV-H400 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP300 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP343PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP551W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP110WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP201 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP322P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP344PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP310PI Merkblatt

TRENDnet

TRENDnet TV-IP651WI Bedienungsanleitung

TRENDnet

TRENDnet TV-IR500 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP551W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP400W - Wireless Advanced Pan Bedienungsanleitung

TRENDnet

TRENDnet TV-IP410WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP344PI Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

TV-IP430PI

ŸOutdoor 2 MP Full HD 1080p PoE+ IR Mini Speed Dome Network Camera

ŸQuick Installation Guide (1)

TV-IP430PI (V1) / 02.27.2015

1. Before You Start

1

Package Contents

Minimum Requirements

Supported Operating Systems

Android (version 2.3 and higher)

iOS (version 6.1 and higher)

TRENDnetVIEW Mobile App Requirements

ŸTV-IP430PI

ŸCD-ROM (Utility and User's Guide)

ŸQuick Installation Guide

ŸTV-HC400, TV-HW400, TV-HP400, or TV-HN400 mounting bracket (sold separately)

ŸPower over Ethernet + (PoE+) switch or injector

ŸComputer with Ethernet port and web browser

ŸCD-ROM drive

ŸWired network

ŸNetwork cable

Note:

The TV-IP430PI camera works with Power over Ethernet+ (PoE+) devices that follow the IEEE

802.3at standard.

2

2. Hardware Installation and Configuration

1. Do not install or mount the camera until you complete the installation steps below. Next to your

computer, temporarily place the IP camera in the provided protective foam insert with the dome

facing up.

2. Connect a network cable from your computer to a LAN port on your network.

3. Insert the included CD-ROM into your computer.

4. Select language from the drop down menu.

5. Select Install Camera.

6. Write down the MAC address of your camera. Then click Next.

Note: To download the latest version of the Setup Wizard, please go to

http://www.trendnet.com/support and select the TV-IP430PI from the products downloads page

dropdown menu.

3

7. Connect a network cable to the camera's network port and to your PoE+ Switch. The IR LEDs

will turn on and show a dim red light. The camera will begin the self checking sequencing.

Allow 60 seconds for the camera to complete calibration. Then click Next.

8. Select your camera, then click Next.

9. Select DHCP and then click Next.

4

10. Select the Change Password box. Enter a new password, confirm the spelling, and click

Next.

11. The initial setup is now complete. Your camera is now connected to your network. Click the

hyperlink to confirm access to the management page. This will open up a web browser. You

will need to download and install a plug-in to view video. Please refer to the Install Web

Browser Plug-in for Camera Management Interface section for instruction. To resume

installation, minimize the web browser and then click Next.

12. Congratulations! Your camera is now ready to be physically installed. Scan the QR code to

download a free mobile app to view the camera from your mobile device. Click Finish to exit

the installation wizard.

5

Note:

ŸSee User's Guide for advanced management functions.

ŸTwo User's Guides are included – one for the camera and one for TRENDnetVIEW Pro

software.

ŸWhen viewing live video from a web browser, you will be prompted to install plug-ins for full

functionality.

ŸIt is recommended that you setup a dynamic DNS service in order to view your cameras

remotely. See your router and IP camera user's guide for instructions.

ŸInstall the camera in your desired location. For mounting instructions, please refer to the

mounting installation guide.

13. To manage multiple cameras and for more advanced features, please install the

TRENDnetVIEW Pro software. From the CD-ROM autorun menu, select Install

TRENDnetVIEW Pro Software to begin installation. Refer to the User's Guide on the CD for

more information.

6

Install Web Browser Plug-in for Camera Management Interface

Windows

1. Access the camera management interface.

2. Enter your username and password. Then press Login.

3. Click on the link to download the plug-in.

4. When prompted to, click Run.

7

5. Click Next.

6. Click Finish.

7. Refresh your browser to view the video.

8

Mac OS X

1. Access the camera management interface.

2. Enter your username and password. Then press Log In.

3. Click on the link to download the plug-in.

4. Double click on the WebComponents.pkg file.

9

6. Click Continue.

7. Click Install.5. Click Continue.

9. Click Close.

8. Enter your computer's Username and

Password. Then click Install Software.