Ubiquiti NanoStationM Series Bedienungsanleitung

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

1/16

NanoStation

M2/M3/M365/M5

Gravata PoE (24V, 0,5A) com suporte

de montagem

Cabo de alimentação

NanoStationloco M2/M5 Gravata PoE (24V, 0,5A) com suporte

de montagem

conteúdo do pacote

NSM2/NSM3/NSM365/NSM5

locoM2/locoM5

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

2/16

Cabo de alimentação

NanoStationlocoM9 Gravata PoE (24V, 0,5A) com suporte

de montagem

Cabo de alimentação

locoM9

Requerimentos de instalação

Cabeamento blindado de Categoria 5 (ou superior) com fio dreno deve ser

usado para todas as conexões Ethernet com fio e deve ser aterrado através do

terra CA do PoE.

We recommend that you protect your networks from harmful outdoor

environments and destructive ESD events with industrial-grade, shielded

Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend

that you use two Ethernet Surge Protectors, model ETH-SP, one near the

NanoStation and the other at the entry point to the building. The ETH-SP will

absorb power surges and safely discharge them into the ground.

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

3/16

Hardware Overview

NSM2/NSM3/NSM365/NSM5/locoM2/locoM5

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

4/16

Power LED

The LED will light green when the device is connected to a power source.

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

5/16

LAN1 LED

LAN2 LED

Signal LEDs

Secondary Port

Main/LAN* Port

Reset Button

The LED will light steady green when an active Ethernet connection is made to

the Main/LAN port and flash when there is activity.

(NanoStation M2/M3/M5 only) The LED will light steady green when an active

Ethernet connection is made to the Secondary port and flash when there is

activity.

In airOS®, you can modify the threshold values for the wireless signal strength

LEDs on the Advanced tab under Signal LED Thresholds. The default values

are shown below:

(NanoStationM2/M3/M5 only) This 10/100 Ethernet port is used for bridging

and supports software-configurable PoE passthrough.

Note: To use PoE passthrough on the Secondary port, a 24V, 1A PoE

adapter is required.

This 10/100 Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the PoE adapter.

* The Main port is labeled LAN on the NanoStationlocoM2/M5.

locoM9

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

6/16

Power LED

LAN1 LED

Signal LEDs

The LED will light green when the device is connected to a power source.

The LED will light steady green when an active Ethernet connection is made to

the Main/LAN port and flash when there is activity.

In airOS®, you can modify the threshold values for the wireless signal strength

LEDs on the Advanced tab under Signal LED Thresholds. The default values

are shown below:

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

7/16

RP-SMA Antenna Connector

Main/LAN Port

Reset Button

Reserved for future use.

This 10/100 Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the PoE adapter.

Installation

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

8/16

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

9/16

Guia de início rápido da série NanoStationM/locoM

29/01/22, 13:44

NanoStationM/locoM Series Quick Start Guide

https://dl.ui.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html

10/16

Connecting Power

WARNING: The switch port must comply with the power specifications

listed in this Quick Start Guide.

Optional

Accessing airOS

Verify connectivity in the airOS Configuration Interface.

1. Make sure that your host system is connected via Ethernet to the device.

Guia de início rápido da série NanoStationM/locoM

Andere Handbücher für NanoStationM Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-LITE-5 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam M5 Bedienungsanleitung

Ubiquiti

Ubiquiti Edge Point EP-R8 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP FlexHD Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam ac Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam M2 Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-5AC-400-ISO-EU Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Stadium XG Bedienungsanleitung

Ubiquiti

Ubiquiti U-Installer Bedienungsanleitung

Ubiquiti

Ubiquiti AF-2X Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP AC EDU Bedienungsanleitung

Ubiquiti

Ubiquiti Bullet AC-IP67 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP XG Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam ac ISO Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-24-US Bedienungsanleitung

Ubiquiti

Ubiquiti AF-2X Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-IW-HD Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung