Ubiquiti Power AP N 802.11n Bedienungsanleitung

Indoor Ultra-Long

Range 802.11n

300Mbps WiFi

Access Point

Package Contents

Power AP N Power Adapter Ethernet Cable

Antennas (Qty. 2) Quick Start Guide

System Requirements

• Microsoft Windows XP, Windows Vista, Windows 7, Linux, or Mac

OS X

• Java Runtime Environment 1.6 (or above) for the AirView utility

• Web Browser: Mozilla Firefox, Apple Safari, or Microsoft Internet

Explorer

Power AP N

Hardware Installation

To install the Power AP N, perform the following steps:

1. Connect each antenna to an antenna connector on the

PowerAPNbyrotatingitclockwise.

2. Raise each antenna to an upright position.

Hardware Installation

3. Connect the power adapter to the power port on the

PowerAPN.Connecttheotherendtoofthepoweradapter

to a power outlet.

4. Connect an Ethernet cable to Ethernet port 1.

Power AP N

5. Connect the other end of the Ethernet cable to your computer.

6. Launch your Web browser and type http://192.168.1.1 in the

address field and press enter (PC) or return (Mac).

Note: Your computer needs to be on the

192.168.1.x subnet. If you have DHCP enabled on

your Ethernet adapter, it should receive an address

automatically. If not, you will need to set a static IP

address in the 192.168.1.2 - 192.168.1.254 range.

Hardware Installation

7. The login screen will appear. Enter ubnt in the Username and

Password fields and click Login.

8. The AirOS interface will appear. Go to the Wireless tab.

Wireless tab

Power AP N

9. Customize your wireless network and secure your network by

entering the basic wireless network information:

a. Enter a name for your wireless network in the SSID field.

b. Select the type of security that you want to use for your

wireless network from the Security drop-down.

Note: WPA2-AES security is the srongest wireless

security method. If all of your devices support this

option, it is recommended that you select it.

c. Enter a passphrase in the WPA Preshared Key field. You

can click the Show option to see the characters that you are

typing.

d. Click Change. You will be prompted to apply the changes.

To proceed, click Apply.

10. If necessary, disconnect the power and Ethernet cables to

move the router so that you can connect it to your Internet

connection.

Hardware Installation

11. Connect an Ethernet cable from your broadband modem or

other Internet connection to the silver port on the back of the

Power AP N.

Congratulations! Basic router installation is complete. The next

page provides information for connecting wireless clients.

Power AP N

Connecting a Wireless Client to the Power AP N

Windows

1. Go to Connect to Network.

- Windows 7 Right-click on the Network icon.

- Windows Vista Go to Start > Connect To.

- Windows XP Right-click the Wireless Network icon in the

System Tray (lower right corner of the screen) and then click

View Available Wireless Networks.

2. Select the wireless network (SSID) that you entered in the SSID

field in step 9a and then click Connect.

3. Type the passphrase that you entered in the WPA Preshared Key

field in step 9c and click OK or Connect.

4. Launch your web browser to begin browsing the web.

Mac

1. Click the AirPort icon in the menu bar (top left side of the

screen).

2. Select the wireless network (SSID) that you entered in the SSID

field in step 9a.

3. Type the passphrase that you entered in the WPA Preshared Key

field in step 9c and click OK.

4. Once connected the AirPort icon will change from gray

to solid black. The number of black lines indicates the signal

strength. Launch your web browser to begin browsing the

web.

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti UniFi nanoHD AP Bedienungsanleitung

Ubiquiti

Ubiquiti Bullet AC-IP67 Bedienungsanleitung

Ubiquiti

Ubiquiti Edge Point EP-R8 Bedienungsanleitung

Ubiquiti

Ubiquiti IsoStation AC IS-5AC Bedienungsanleitung

Ubiquiti

Ubiquiti RocketM Series Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-Outdoor-5 Bedienungsanleitung

Ubiquiti

Ubiquiti RocketM Bedienungsanleitung

Ubiquiti

Ubiquiti NBE--2AC--13 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStationM Series Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation loco Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket Prism AC GEN 2 RP-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti LiteAP ac LAP-120 Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-400-ISO Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-IW Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-5AC-400-ISO-EU Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5ac PtMP Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStationM Series Bedienungsanleitung

Ubiquiti

Ubiquiti BulletAC-IP67 Bedienungsanleitung

Ubiquiti

Ubiquiti Uni-fi AP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Wifi BaseStationXG Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5AC-Lite Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung