Ubiquiti UniFi AC SHD Bedienungsanleitung

802.11ac Wave 2 Access Point

with Dedicated Security Radio

Model: UAP-AC-SHD

Introduction

Thank you for purchasing the Ubiquiti Networks®

UniFi®802.11ac Wave 2 Access Point with Dedicated Security

Radio. This Quick Start Guide is designed to guide you through

installation and includes warranty terms.

IMPORTANT: The UAP-AC-SHD requires the UniFi

Controller v5.4 or higher, available at:

www.ubnt.com/download/unifi

Package Contents

UniFi AP AC SHD Mounting

Plate

Ceiling Backing

Plate

Ceiling Screws

(Qty. 4)

Keps Nuts

(Qty. 4)

T-Bar Mounts

(Qty. 2)

T-Bar Screws

(Qty. 2)

Allen Wrench

802.11AC Wave 2 Access Point

with Dedicated Security Radio

Model: UAP-AC-SHD

Wall Screw

(Qty. 4)

Screw Anchors

(Qty. 4)

Release Tool Cable Feed

Plug

Quick Start

Guide

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is

designed for outdoor installations. It is the professional installer’s responsibility to follow local

country regulations, including operation within legal frequency channels, output power, and

Dynamic Frequency Selection (DFS) requirements.

Installation Requirements

• Phillips screwdriver

• Drill and drill bit (8 mm for wall mounting or 3 mm for ceiling

tile mounting)

• Optional: Drywall or keyhole saw (to cut 18 mm hole for

Ethernet cable feed)

• Cat5/6 UTP cable for indoor installations

Outdoor Installation Requirements

IMPORTANT: The UAP-AC-SHD may be installed

outdoors under an eave or other protected location. Do

not install the UniFi AP in an open environment.

• Mounting location should be at least 60 cm (2 ft) from the

edge of the eave or ceiling.

• Cable feed opening must be directed away from the open

environment.

• Cable feed must be pointed downwards when wall-mounted.

• Shielded Category 5 (or above) cabling should be used

for all outdoor wired Ethernet connections and should be

grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit: www.ubnt.com/toughcable

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v5.4 or newer (available at:

www.ubnt.com/download/unifi)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v5.4 (or newer) software, located either on-site

and connected to the same Layer 2 network, or off-site in the

cloud or NOC

US-16-150W

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-SHD

UAP-AC-M-PRO

UAP-AC-PRO

LAN

WAN

UniFi Hybrid

Cloud Install

Remote Access to

UniFi Controller

Sample Network Diagram

All UniFi devices support off-site management controllers. For

setup details, see the User Guide on the website:

www.ubnt.com/download/unifi

Hardware Overview

LED

LED Color Status

White Factory default, waiting to be integrated.

Flashing White Initializing.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Blue

Indicates the device has been successfully

integrated into a network and is working

properly.

Quickly

Flashing Blue

This is used to locate an AP.

When you click Locate in the UniFi

Controller software, the AP will flash. It

will also display the location of the AP on

the map.

Steady Blue

with Occasional

Flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Ports

Main

Port

Secondary

Port

Security

Slot

Reset

Button

USB 3C

Port

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

USB 3C The USB 3C port is reserved for future use.

Secondary The Secondary port is a Gigabit Ethernet port used

for bridging.

Main The Main port is a Gigabit Ethernet port used to

connect the power and should be connected to the LAN and

DHCPserver.

IMPORTANT: The UAP-AC-SHD cannot be powered

by the US-8 or US-8-60W; however, it can be powered

by other UniFi PoE Switches that provide 802.3at

PoE+power.

Note: If you need to remove the UniFi AP from the

Mounting Plate, insert the included Release Tool in the

Security Slot to release the Lock Tab and turn the UniFi

AP counterclockwise.

Mounting Plate

The Mounting Plate offers a variety of mounting holes for

different applications. The legend printed on the Mounting

Plate identifies the holes used for each application.

Upgrade from UAP-AC-PRO

The UAP-AC-SHD is compatible with the UAP-AC-PRO

mounting hardware, so you only need to remove the

UAP-AC-PRO and replace it with the UAP-AC-SHD. To begin

the upgrade:

1. Insert the Release Tool into the UAP-AC-PRO Security

Slot to disengage the lock. Then turn the UAP-AC-PRO

counterclockwise and lift it off of the mounting bracket.

Security Slot

UAP-AC-PRO (Wall Mount Installation)

2. Unplug the Ethernet cable from the Main port.

3. Go to the Connecting Ethernet section.

Hardware Installation

The UniFi AP can be mounted on a wall, ceiling tile, drop

ceiling T-rail (up to 40 mm), or electrical junction box. Perform

the steps for the appropriate installation.

Note for UniFi AP replacement: The holes marked “A” on

the Mounting Plate line up with the holes of mounting

brackets used for previous UniFi AP models.

Wall Mount

1. Position the Mounting Plate at the desired location on the

wall with the Arrow pointing up.

2. Mark the four mounting holes labeled “A”, and use an

8mm drill bit to drill the holes. If your Ethernet cable feeds

through the wall, cut or drill a hole approximately 18 mm in

diameter. Then feed the CAT5/6 cable through the hole.

Arrow

Optional 18 mm Hole for

Ethernet Cable Feed through the Wall

*640-00279-06*

640-00279-06

3. Insert the Screw Anchors into the holes. Secure the

Mounting Plate to the wall by inserting the Wall Screws into

the anchors.

4. Go to the Connecting Ethernet section, and then return to

step 5.

5. Align the Arrow on the top edge of the UniFi AP with the

Arrow on the Mounting Plate.

Arrow

Lock Tab

Arrow

6. Rotate the UniFi AP clockwise until the tabs lock into place

and the Lock Tab engages.

Ceiling Mount

1. Remove the ceiling tile.

2. Place the Ceiling Backing Plate in the center of the ceiling

tile. Mark the four mounting screw holes and an 18 mm

hole for the Ethernet cable feed.

Optional 18 mm Hole for Ethernet Cable

Feed through the Ceiling Tile

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti airFiber 24 HD Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam NBE2ACN Bedienungsanleitung

Ubiquiti

Ubiquiti Lite Beam AC LR LBE-5AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi nanoHD UAP-nanoHD Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AC MESH PRO Bedienungsanleitung

Ubiquiti

Ubiquiti airGateway-LR Bedienungsanleitung

Ubiquiti

Ubiquiti IsoStation M5 Bedienungsanleitung

Ubiquiti

Ubiquiti AMPLIFI Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi WiFi BaseStation XG Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC GENZ Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UniFI UAP-AC Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation M2 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UBB Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi nanoHD AP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-IW Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation5 Bedienungsanleitung

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-16-120 Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-300-US Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Enterprise AP Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam m5 iso PBE-M5-300-ISO Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung