Vacmaster VF408 Bedienungsanleitung

Distributed By

Cleva North America, Inc.

601 Regent Park Court

Greenville, SC 29607

Replacement Filters &

Accessories available at:

Vacmaster.com

FOR YOUR SAFETY

Read and understand this manual before use.

Keep this manual for future reference.

4 Gallon

Model No.

VF408

Operator’s Manual

Wet/Dry Vacuum

SAFETY INSTRUCTIONS & WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

SAVE THIS MANUAL

WARNING:

FOR FUTURE REFERENCE.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM.

Read and understand this operator's manual and all labels on the Wet/Dry Vacuum cleaner before

operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum

works. Use this Wet/Dry Vac only as described in this manual. To reduce the risk of personal

injury or damage to your Wet/Dry Vac, use only Vacmaster®recommended accessories.

When using an electrical appliance, basic precautions should always be followed

including the following:

• Do not run vac unattended.

• Do not vacuum, or use this Wet/Dry Vac near ammable liquids, gases, or explosive vapors

like gasoline or other fuels, lighter uids, cleaners, oil-based paints, natural gas, hydrogen, or

explosive dusts like coal dust, magnesium dust, grain dust, or gun powder. Sparks inside the

motor can ignite ammable vapors or dust.

• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Keep cord away from heated surfaces.

• Do not expose to rain. Store indoors.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not use with damaged cord, plug, or other parts.

• If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped

into water, return it to a service center.

• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp

edges or corners.

• Do not run Wet/Dry Vac over cord.

• Do not handle plug or the Wet/Dry Vac with wet hands.

• To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials.

• Do not use or store near hazardous materials.

• Do not use this Wet/Dry Vac with a torn lter or without the lter installed except when

vacuuming liquids as described in the operation section of this manual.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• To reduce the risk of injury from accidental starting, unplug power cord before changing or

cleaning lter.

• Do not leave Wet/Dry Vac unattended when plugged in. Unplug from outlet when not in use and

before servicing.

• Turn off Wet/Dry Vac before unplugging.

• Do not put any object into ventilation openings. Do not vacuum with any ventilation openings

blocked; keep free of dust, lint, hair, or anything that may reduce air ow.

• Keep hair, loose clothing, ngers, and all parts of body away from openings and moving parts.

• To reduce the risk of falls, use extra care when cleaning on stairs.

• Unplug before connecting hose.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• This appliance is provided with double insulation. Use only identical replacement parts. See

“DOUBLE INSULATION INSTRUCTIONS”.

Household Type

DOUBLE INSULATION INSTRUCTIONS

EXTENSION CORDS

This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use

only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry

Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following

warnings that appear on the motor housing of your Wet/Dry Vac.

When using an extension cord with your Wet/Dry Vac refer to the following table to determine

the required A.W.G. wire size. Before using the vacuum cleaner, make sure the power cord and

extension cord are in good working condition. Make repairs or replacements before using the

vacuum cleaner. Only use extension cords that are rated for outdoor use.

• DO NOT use without lters in place.

CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS, UNPLUG BEFORE

SERVICING.

CAUTION:

Do not vacuum drywall dust or replace soot or ash with standard Wet/Dry lter. This is a very ne

dust which will not be captured by the lter and may cause damage to motor. When vacuuming

ne dust use a ne dust lter (sold separately).

DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE

ONLY IDENTICAL REPLACEMENT PARTS.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.

STORE INDOORS.

WARNING:

Length of Extension Cord

A.W.G. Wire Size

Not recommended

25 Feet

7.5 Meters

50 Feet

15.25 Meters

100 Feet

30.5 Meters

150 Feet

45.7 Meters

110V-120V

Amps

0-6

7-10

11-12

13-16

WARNING:

WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE

PROVIDED INSTEAD OF GROUNDING. NO GROUNDING MEANS IS PROVIDED ON A

DOUBLE-INSULATED APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED.

SERVICING A DOUBLE INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND

KNOWLEDGE OF THE SYSTEM, AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE

PERSONNEL. REPLACEMENT PARTS FOR A DOUBLE-INSULATED WET/DRY VACUUM

MUST BE IDENTICAL TO THE PARTS THEY REPLACE. YOUR DOUBLE-INSULATED

WET/DRY VAC IS MARKED WITH THE WORDS ‘DOUBLE INSULATED’ AND THE SYMBOL

(SQUARE WITHIN A SQUARE) MAY ALSO BE MARKED ON THE APPLIANCE.

SERVICING OF DOUBLE-INSULATED WET/DRY VACUUM

UNPACKING & CHECKING CARTON

CONTENTS

Remove all contents from the box. Remove the

power head and take out any contents inside

the collection tank. Check each item against

the carton contents list.

NOTE: The hose and accessories for this

vacuum are 1.25” (3.2 cm) diameter.

BCDE

FG H I J

K L MN

O P QRS

Carton Contents List:

Description............................................

Vac Assembly........................................

Hose......................................................

2-in-1 Utility Nozzle...............................

Round Dust Brush.................................

Crevice Tool...........................................

Multi-Surface Floor Nozzle....................

Cartridge Filter.......................................

Filter Retainer........................................

Foam Wet Filter.....................................

Accessory Storage Caddy.....................

Extension Wand....................................

Hose Storage Rack...............................

HEPA Filter Door...................................

HEPA Filter............................................

Casters..................................................

Rear Wheels..........................................

Handle...................................................

4 Screws (Bag)......................................

Operator’s Manual.................................

Key

Qty.

Cord Rewind Button

Rear Wheel

Latch

Casters

Power Head

Hose Storage Rack

Tool Caddy

Vacuum Port

Handle

Power Switch

Collection Tank

GENERAL ASSEMBLY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.

MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC.

WARNING:

UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY

1. Verify that the power cord is disconnected from the outlet. (g. 1)

2. Undo the latches. (g. 2)

3. Lift the power head off the collection tank. (g. 3)

4. Remove the contents from inside the collection tank; make sure you have all contents as listed

on page 5. (g. 4)

5. Turn the collection tank upside down and insert the two (2) casters into the slots on the front

side of the collection tank. Apply downward pressure until the casters snap into place. (g. 5)

6. Slide the rear wheels into the slots making sure to match the wheel number to the

corresponding number on the wheel slot and use screws to secure them. Do not over-tighten

the screws. (g. 6 & 7)

7. Your vacuum comes ready for dry vacuum cleaning. For installation instructions, see page 9.

(g. 8 & 9)

8. For wet vacuum cleaning, install the supplied foam lter. (g. 10) For installation instructions,

see page 10.

9. Place the power head back on the collection tank, aligning the top section with the latches, and

snap into place. (g. 11)

10. Insert the handle into the slots located on the top of the power head and secure it with the

screws provided. Do not over-tighten the screws. (g. 12)

11. Hang the tool caddy onto the hooks on the back of the vacuum. (g. 13)

12. Secure the large end of the hose onto the vacuum port on the collection tank and screw into

place. (g. 14)

13. Choose the desired accessories and push onto the hose. (g. 15)

A Philips head screw driver is required.

POLARIZED PLUG

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the

other). This plug will t in a polarized outlet only one way. If the plug does not t fully in the outlet,

reverse the plug. If it still does not t, contact a qualied electrician to install the proper outlet.

Do not change the plug in any way. Double insulation eliminates the need for the three wire

grounded power cord and grounded power supply system.

1 3 4 56

8910

14 15

11 12

DRY VACUUM OPERATION

1 2 3 5

8 9

711

DRY VACUUMING

WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION

ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH

FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE

GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT

TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS.

EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN,

OR GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR

DUST, DO NOT VACUUM TOXIC MATERIALS.

1. Verify that the power cord is disconnected from the outlet. (g.1)

2. In order to prepare your vacuum for dry vacuuming, verify that the cartridge lter is securely

mounted. Make sure the lter is pushed in until it stops against the power head. (g. 2) Your

Wet/Dry Vac comes with the cartridge lter pre-installed. For installation instructions, see page

3. Place lter retainer on top of cartridge lter and tighten by turning the retainer handle

clockwise. (g. 3)

4. Optional: For improved dust ltering, t collection bag ange onto the inlet port, taking care not

to damage the bag. Dust bag sold separately. (g. 4)

5. Place the power head back on the collection tank, aligning the top section with the latches, and

lock into place. (g. 5)

OPERATING INSTRUCTIONS: DRY VACUUMING

6. Insert the locking end of the hose into the vacuum port on the power head and screw in place.

Push the desired extension wands or attachments onto the free end of the hose. (g. 6)

7. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the outlet.

(g. 7 & 8)

8. Turn the motor on by ipping the switch to the ‘I’ ON position. (g. 9)

9. Once you have completed vacuuming, ip the switch to the ‘O’ OFF position and unplug the

power cord from the outlet. (g. 10 & 11)

10. To rewind the cord, hold on to the plug and press the cord rewind button. Do not allow plug to

whip when rewinding. (g. 12)

O = OFF I = ON

DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.

DO NOT USE DUST BAG FOR LIQUID VACUUMING.

LIQUID VACUUM OPERATION

LIQUID VACUUMING

WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION

ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH

FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE

GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT

TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS.

EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN,

OR GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR

DUST, DO NOT VACUUM TOXIC MATERIALS.

WARNING: DO NOT PLUG POWER CORD INTO POWER OUTLET. MAKE SURE PLUG

IS DISCONNECTED BEFORE CHANGING THE FILTERS.

2 3

710

1. Verify that the power cord is disconnected from the outlet. Verify that the collection tank is clean

and free of dust and dirt. (g. 1)

2. Remove cartridge lter and the dust collection bag, then carefully install the foam wet lter over

the lter cage and place the power head back on the collection tank. (g. 2) For installation

instructions, see page 10.

DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.

OPERATING INSTRUCTIONS: WET VACUUMING

3. Fit the desired extension wands or nozzle to the vacuum hose. (g. 3)

4. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the outlet. (g.

4 & 5)

5. Turn the motor on by ipping the switch to the ‘I’ ON position. (g. 6)

6. After use, ip the switch to the ‘O’ OFF position and unplug the power cord from the outlet. (g.

7 & 8)

7. Empty the collection tank into a suitable receptacle or drain. (g. 9)

8. To rewind the cord, hold on to the plug and press the cord rewind button. Do not allow plug to

whip when rewinding. (g. 10)

IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle completely

in the liquid; leave a gap at the tip of the nozzle opening to allow air inow. The machine is tted

with a oat valve that stops the suction action when the collection tank reaches its maximum

capacity. You will notice an increase in motor speed. When this happens, turn off the machine,

disconnect from power supply, and drain the liquid into a suitable receptacle or drain. After wet

vacuuming, turn the machine off and remove plug from power supply. Empty the collection tank,

MAINTENANCE

1. Verify that the power cord is disconnected from the outlet. (g.1)

2. Disconnect the hose from the vacuum. (g. 2)

3. Undo the latches and remove the power head from the collection tank. (g. 3)

4. Clear all dirt or debris from the collection tank and hose. (g. 4)

5. Clean the foam lter by washing it with water and mild soap. (g. 5)

6. Check the hose, attachments, and power cord to verify that they have not been damaged.

7. Place power head on collection tank and secure latches.

IMPORTANT! Clean or change the cartridge lter regularly for best performance. ALWAYS USE

CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge lter,

the motor will burn out and the warranty will be voided. Always keep spare lters on hand.

NOTICE! The lters included are made of high quality materials designed to stop small dust

particles. The cartridge lter should be used for dry pick-up only. A dry cartridge lter is necessary

to pick up dust. If the cartridge lter is wet, it will clog quickly and be very difcult to clean. Handle

the lter carefully when removing it for cleaning and replacing it. Check the lters for tears or small

holes, a small hole can let dust pass through and out of the lter. Do not use a lter with holes or

tears in it; replace it immediately.

WARNING! ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE

REMOVING THE POWER HEAD FROM THE COLLECTION TANK.

1 2 3 4 5

clean and dry the inside and outside before storage. REMEMBER! The foam wet lter must be

removed after wet vacuuming, and a cartridge lter must be installed before dry vacuuming again.

2 3 4 5 61

3 42

5 6

Installing Cartridge Filter

1. Verify that the power cord is disconnected from the outlet. (g. 1)

2. Remove power head and place in upside down position.

3. Install the cartridge lter over the lter cage and carefully push lter in until it stops against the

power head. (g. 2 & 3)

4. Place lter retainer on top of cartridge lter and tighten down by turning retainer clockwise. (g.

4 & 5)

Removing and Cleaning Cartridge Filter

1. Unlock and remove the lter retainer by turning retainer handle counter clockwise.

2. Carefully hold and pull the cartridge lter up for removal. (g. 6)

3. Clean the cartridge lter by gently tapping or brushing dirt off. Cleaning should not be done

indoors in living areas. For optimal performance a new lter is recommended.

4. Install cleaned or new lter as instructed above in steps 1 - 4 of Installing Cartridge Filter.

5. Wet lters should be removed and allowed to air dry for 24 hours before installing onto the lter

cage.

Installing and Cleaning HEPA Filter

1. Verify that the power cord is disconnected from the outlet. (g. 1)

2. Unlock the lter door by lifting the lock tab UP to the unlocked position and pull the door out. (g.

2 & 3)

3. Remove the HEPA lter cartridge from the vacuum. (g. 4)

4. Clean lter by brushing dirt off. For optimal performance a new lter is recommended. (g. 5)

5. Install the cleaned or new lter. (g. 6)

6. Insert the lter door tabs into the upper slots and lock the lter door into place. (g. 7 & 8)

INSTALLING & CLEANING CARTRIDGE

FILTER

2 3 4 5

Installing Foam Wet Filter

1. Verify that the power cord is disconnected from the outlet. (g. 1)

2. Remove power head and place in upside down position. Follow instructions to remove cartridge

lter.

3. Carefully slide foam wet lter down over the lter cage making sure the cage is completely

covered. (g. 2 & 3)

4. Place the power head onto the collection tank.

Cleaning Foam Wet Filter

1. With the removed power head in an upside down position, carefully remove foam wet lter. (g.

2. Use a mild soap and water solution to wash foam wet lter and rinse with clean water. (g. 5)

3. Allow lter to air dry before installing and using again.

INSTALLING & CLEANING FOAM WET

FILTER

TROUBLESHOOTING

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE

TROUBLESHOOTING

Symptom Possible Causes Corrective Action

Vacuum will not operate.

1) No power supply. 1) Check power supply – cord,

breakers, fuses.

2) Faulty power cord. 2) Unplug and check the

power cord. If damaged,

have it repaired by a

professional.

3) Collection tank full. 3) Empty collection tank.

Dust comes from motor cover. 1) The dust lter is missing or

damaged.

1) Attach or replace dust lter.

Reduced efciency and motor/

speed vibration.

1) There is a blockage in the

nozzle or hose, or the

collection tank inlet. Or dust

lter blocked by ne dust.

1) Check nozzle, hose and

collection tank inlets for

blockage. Take off the lter

and clean it or install a new

lter.

Andere Handbücher für VF408

Inhaltsverzeichnis

Andere Vacmaster Staubsauger Handbücher

Vacmaster

Vacmaster DVTB204 0201 Bedienungsanleitung

Vacmaster

Vacmaster VOM205P Bedienungsanleitung

Vacmaster

Vacmaster VSD1801 Bedienungsanleitung

Vacmaster

Vacmaster VOC508S 1101 Bedienungsanleitung

Vacmaster

Vacmaster VOC507S Bedienungsanleitung

Vacmaster

Vacmaster VSD1801 Bedienungsanleitung

Vacmaster

Vacmaster VK811PH Bedienungsanleitung

Vacmaster

Vacmaster VK1530SIWDC-T 950204 Bedienungsanleitung

Vacmaster

Vacmaster VJH1211PF 0201 Bedienungsanleitung

Vacmaster

Vacmaster VH105 Bedienungsanleitung

Vacmaster

Vacmaster VJF910PF 0201 Bedienungsanleitung

Vacmaster

Vacmaster VDK611PF 0201 Bedienungsanleitung

Vacmaster

Vacmaster VHB305M Bedienungsanleitung

Vacmaster

Vacmaster MVOA407S Bedienungsanleitung

Vacmaster

Vacmaster PROFESSIONAL VJE1412SW 0201 Bedienungsanleitung

Vacmaster

Vacmaster VWM510 Bedienungsanleitung

Vacmaster

Vacmaster VJC1612PF 0201 Bedienungsanleitung

Vacmaster

Vacmaster VWM1518R Bedienungsanleitung

Vacmaster

Vacmaster VMVK1520SIWC Bedienungsanleitung

Vacmaster

Vacmaster vmVF1515HJ Bedienungsanleitung

Vacmaster

Vacmaster VF410P Bedienungsanleitung

Vacmaster

Vacmaster VJC507P Bedienungsanleitung

Vacmaster

Vacmaster CC0101 Bedienungsanleitung

Vacmaster

Vacmaster VBV1210 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung