Vaxcel T0541 Gebrauchsanweisung

191127

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

Hardware Package (included):

Mounting Screw (B) Rubber Pad (E)

Cross Bar Unit (A) Wire Connector (C) Bolt Nut (D)

T0541 / T0543

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

Installation steps

1. Remove the two bolt nuts (D), the two rubber pads (E)

and the cross bar unit (A) from the backplate.

2. Attach the cross bar unit (A) to the outlet box using

two mounting screws (B). Adjust the length of the

preinstalled headless screws if necessary.

Note: Make sure that the headless screws are lined

up horizontally to make the fixture level.

Turn off the power at fuse or circuit box.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Wire Connector (C)

House Grounding Wire

Outlet Box

Mounting Screw (B)

Green Grounding Screw

Headless Screw

Cross Bar Unit (A)

Fixture Wire

Fixture Grounding Wire

Backplate

Bolt Nut (D)

Rubber Pad (E)

Socket

Glass Shade

Metal Frame

Set Screw x 3

Fixture

Max.60W Type T Bulb

(not included)

191127

3. Remove the three set screws and the metal frame from the fixture.

4. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

• Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

• Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.

• Attach the fixture grounding wire (usually green insulation or bare wire) to the cross bar unit (A) with the

green grounding screw. Then, depending on local code connect it to the house grounding wire with the wire

connector (C).

Carefully put all of the wires back into the outlet box.

5. Attach the backplate of the fixture to the cross bar unit (A) by aligning and inserting the two headless screws from

the cross bar unit (A) into the open holes on the backplate, then place the two rubber pads (E) over the exposed

headless screws before screwing the two bolt nuts (D).

Note: With silicone caulking compound, caulk completely around where the backplate meets with the wall

surface to prevent water from seeping into the outlet box.

6. Install bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed .

7. Attach the glass shade into the metal frame.

8. Attach the metal frame and glass shade to the fixture, then secure it with the set screws.

Turn on the power at fuse or circuit box.

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Mounting Hardware

6185MM (1SET)

T0541

Glass Shade

10131CS

T0543

Glass Shade

10132CS

Mounting Screw (B) Rubber Pad (E)

Cross Bar Unit (A) Wire Connector (C) Bolt Nut (D)

Set Screw

6188SER

T0541

A: 12-1/2”

B: 7-1/2”

C: 9-1/2”

T0543

A: 16”

B: 9-1/2”

C:12”

Dieses Handbuch passt für folgende Modelle

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel T0178 Gebrauchsanweisung

Vaxcel

Vaxcel T0698 Gebrauchsanweisung

Vaxcel

Vaxcel T0647 Gebrauchsanweisung

Vaxcel

Vaxcel T0442 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel Lambda T0627 Gebrauchsanweisung

Vaxcel

Vaxcel T0172 Gebrauchsanweisung

Vaxcel

Vaxcel T0649 Gebrauchsanweisung

Vaxcel

Vaxcel T0130 Gebrauchsanweisung

Vaxcel

Vaxcel T0696 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel Proline T0429 Gebrauchsanweisung

Vaxcel

Vaxcel T0637 Gebrauchsanweisung

Vaxcel

Vaxcel T0076 Gebrauchsanweisung

Vaxcel

Vaxcel T0669 Gebrauchsanweisung

Vaxcel

Vaxcel T0363 Gebrauchsanweisung

Vaxcel

Vaxcel T0193 Gebrauchsanweisung

Vaxcel

Vaxcel T0366 Gebrauchsanweisung

Vaxcel

Vaxcel T0468 Gebrauchsanweisung

Vaxcel

Vaxcel T0616 Gebrauchsanweisung

Vaxcel

Vaxcel T0701 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0241 Gebrauchsanweisung

Vaxcel

Vaxcel T0112 Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung