Vicon Cruiser SN673V-C Bedienungsanleitung

User Manual

SN673V-C

Cruiser™ Outdoor PTZ Dome Camera

XX249-65-00

Vicon Industries Inc. does not warrant that the functions contained in this equipment will

meet your requirements or that the operation will be entirely error free or perform precisely as

described in the documentation. This system has not been designed to be used in

life-critical situations and must not be used for this purpose.

Document Number: 8009-8249-65-00 Product specifications subject to change without notice.

Vicon Industries Inc.

Tel: 631-952-2288) Fax: 631-951-2288

Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON

(800-348-4266)

UK: 44/(0) 1489-566300

www.vicon-security.com

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO

NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE

EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC INFORMATION: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN

THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU

ARE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

17. ITE is to be connected only to PoE networks without routing to the outside

plant.


Contents 
 Introduction...................................................................................................................6
1   Components..................................................................................................................... 6
2   Key Features ....................................................................................................................7
 Installation.....................................................................................................................8
1   Mounting the Dome Camera ........................................................................................... 8
1.1   Locking the Dome Camera......................................................................................8
2   Basic Configuration of Dome Camera System ............................................................10 
3   Resetting to the factory default settings...................................................................... 11 
4   Connections................................................................................................................... 12 
4.1   Network Connection & IP Assignment.................................................................13 
 Operation.....................................................................................................................14 
1   Access from a browser..................................................................................................14 
2   Access from the internet............................................................................................... 15 
3   Setting the admin password over a secure connection.............................................. 15 
4   Live View Page...............................................................................................................16 
5   Playback.........................................................................................................................18 
6   Network Camera Setup.................................................................................................. 20 
6.1   Basic Configuration...............................................................................................20 
6.2   Video & Image........................................................................................................25 
6.3   Audio ......................................................................................................................34 
6.4   Event ......................................................................................................................35 
6.5   Dome Configuration ..............................................................................................58 
6.6   System ...................................................................................................................65 
7   Help................................................................................................................................. 85 
A   Appendix .....................................................................................................................86 
A.1   Troubleshooting ............................................................................................................ 86 
A.2   Alarm Connection .........................................................................................................87 
A.3   Preventive Maintenance ............................................................................................... 87 
A.4   System Requirement for Web Browser .......................................................................88 
A.5   General Performance Considerations .........................................................................88 
A.6   Product Specification ...................................................................................................89 

1 Introduction

The Cruiser SN673V-C is an outdoor camera dome that includes 1080p high resolution camera

lens combination that provides video transmission over a network. It is fully featured for security

surveillance and remote monitoring needs.

The camera provides quad-streaming video and supports H.264/H.265 compression technology,

drastically reducing file sizes and conserving valuable network bandwidth; M-JPEG compression is

also supported. By using its dedicated program, multiple users are able to have access to the

network camera simultaneously, or a single user can monitor various network cameras at the same

time. It also enables users to play, store and retrieve a monitoring image by using a PC. All the

settings and real time monitoring screens are provided through access to the web.

Refer to Vicon’s website, vicon-security.com, for the latest documentation.

1.1 Components

This system comes with the following components;

* Dome Camera 1

* Installation Guide 1 (

* Template Sheet 1

* Mounting Bracket 1

* Safety Lanyard 1

* Accessory Kit 1

1) Mounting screws (PH6 x 35.0) (4)

2) Plastic anchors (4)

3) O-Rings (4)

4) Torx wrench (1)

* Accessory Connector 1

1) 3-Pin Terminal Block (1)

2) 6-Pin Terminal Block (1)

* RJ-45 Waterproof Cover 1

NOTE: Check your package to make sure that you received the complete system, including

all components listed above.

NOTE: Adaptor for 12VDC & 24VAC is not supplied.

1.2 Key Features

• Brilliant video quality

The network camera offers the highly efficient H.264/H.265 video compression, which

drastically reduces bandwidth and storage requirements without compromising image quality.

Motion JPEG is also supported for increased flexibility.

• Quad Streams

The network camera can deliver quad video streams simultaneously using H.264/H.265 and

Motion JPEG. This means that several video streams can be configured with different

compression formats, resolutions and frame rates for different needs.

• Intelligent video capabilities

The network camera includes intelligent capabilities such as enhanced video motion detection.

The network camera’s external inputs and outputs can be connected to devices such as

sensors and relays, enabling the system to react to alarms and activate lights or open/close

doors.

• Improved Security

The network camera logs all user access, and lists currently connected users. Also, its full

frame rate video can be provided over HTTPS.

• PoE (Power over Ethernet)

This network camera can be powered through PoE, which simplifies installation since only one

cable is needed for carrying power, as well as video controls.

• ONVIF Certificate

This is a global interface standard that makes it easier for end users, integrators, consultants,

and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility,

reduced cost, and future-proof systems.

• Micro-SD Recording support

The network camera also supports a Micro-SD memory slot for local recording with removable

storage of type SDHC and SDXC.

• Audio support

The network camera also supports two-way audio.

2 Installation

2.1 Mounting the Dome Camera

The dome camera is for use in surface or pendent mounting applications, and the mounting

member must be capable of supporting loads of up to 10 lb (4.5 kg). (Pendent mounting must use

pendent mount accessory.)

The dome cameras mounting bracket should be attached to a structural object, such as hard wood,

wall stud or ceiling rafter that supports the weight of the dome camera.

CAUTION: A silicone rubber sealant must be applied to seal the housing to secure

waterproofing.

CAUTION: Please reset the camera after 30 ~ 60 minutes when installing it in situations

colder than 14° F (-10° C).

2.1.1 Locking the Dome Camera

1. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).

2. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting Screws (4x)

(Figure B).

3. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).

4. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).

5. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E).

CAUTION: Before installing mounting bracket to surface pre-adjust the four mounting

screws “A” on the base of the dome camera to best match the mounting

bracket locked position. Unscrew the locking screw on the side of the dome’s

base and fit the tab of the mounting bracket into the locking slot. Screws “A”

should not be too tight or too loose when the dome is in the locked position.

After setting the proper positions of screws “A” remove the mounting bracket

and install it to the proper surface. If it is too difficult to lock the dome in

position after the mounting bracket has been installed readjust the screws

“A” by unscrewing them a small amount and try to install dome camera again.

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon Roughneck AI V2000D Series Bedienungsanleitung

Vicon

Vicon V662V-2 Series Betriebsanleitung

Vicon

Vicon Surveyor MKII Series XX282-00-01 Bedienungsanleitung

Vicon

Vicon Surveyor 99 Betriebsanleitung

Vicon

Vicon Surveyor 282-00-02 Series Bedienungsanleitung

Vicon

Vicon Surveyor MKII Series XX282-00-01 Bedienungsanleitung

Vicon

Vicon Cruiser SN663V Bedienungsanleitung

Vicon

Vicon IX 4000 L Bedienungsanleitung

Vicon

Vicon V700W Series Bedienungsanleitung

Vicon

Vicon Cruiser SN663V-A Bedienungsanleitung

Vicon

Vicon V920B Series Bedienungsanleitung

Vicon

Vicon SurveyorVFT SVFT-UPM-1 Bedienungsanleitung

Vicon

Vicon V840D Series Bedienungsanleitung

Vicon

Vicon V980B Series Bedienungsanleitung

Vicon

Vicon V662V-Series Betriebsanleitung

Vicon

Vicon Series 247-00-03 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Vicon

Vicon V15CCM-IR-2 Series Rouchneck Bedienungsanleitung

Vicon

Vicon Roughneck V920D Series Montage- und Bedienungsanleitung

Vicon

Vicon Surveyor MKII Betriebsanleitung

Vicon

Vicon SN663V-B Bedienungsanleitung

Vicon

Vicon SVR-C Bedienungsanleitung

Vicon

Vicon V662-D Betriebsanleitung

Vicon

Vicon SN688D-WIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung