WE-EF CFY259 LED Bedienungsanleitung

Surge Protection

For comprehensive protection of a luminaire installation against lightning and

electrical surges, it is essential to cover mains supply and data input lines at

the distribution board level, by using respective primary (Type 1) and

secondary (Type 2) surge arrestors in compliance with EN61643-11/

IEC61643-1.

Warning

Ensure that all required surge protection measures are in place and activated

prior to luminaire installation. Also, disconnect luminaires before operating

high-power devices such as, for example, electrical arc welders.

Do not open during installation

This product is factory-sealed.

Refer to the instructions contained in this

document for details.

Installation tools

Mounting hardware used on this product

includes fasteners with hexalobular socket

heads (ISO 10664). Installation requires the

use of matching tools.

Bollard

WE-EF LIGHTING

Installation and Maintenance

Instructions

CFY259

LED

ZFY23

-AP LED

KTY234-AP LED

INSTALLER

HOTLINE

+61 458 933 399

7am – 7pm AEST

Bollard

ZFY230-AP

H = 600 mm ZFY230-AP

H = 1000 mm

300-0461 3.2

ESV4

1000

ø 180

600

ø 180

H kg

600 7.8

IP66, Class I, ta = 25°C

Weight

for

ZFY230-AP

for

ZFY230-AP

Accessories:

Planted root

– Galvanised steel.

ESV4

for ZFY230-AP

1000 8.9

ESV4

Weight kgH

for KTY234-AP 600 6.8

for KTY234-AP 1000 8.9

Accessories:

Planted root

– Galvanised steel.

ESV4

for KTY234-AP 300-0461 3.2

IP66, Class I, ta = 25°C

Bollard

KTY234-AP

H = 600 mm

KTY234-AP

H = 1000 mm

685

ø 240

1085

65°

ø 190 ø 240

ESV4

Weight kgH

for CFY259 600 15

for CFY259 1000 18

Accessories:

Planted root – Galvanised steel.

ESV4 for CFY259 300-04644.4

IP66, Class I, ta = 25°C

Bollard

CFY259

H = 600 mm

CFY259

H = 1000 mm

CFY259

H600 / 6 LED

CFY259

H1000 / 2x6 LED

WARNING : HEAVY ITEMS

Ensure correct handling

techniques are used

Light Source

LED

Maintenance

Apart from cleaning the product’s exterior surfaces, no special maintenance work is required.

Do not use high-pressure cleaners.

To remove the head of the luminaire during maintenance, loosen screw

with a Torx T-20 tool and

rotate anti-clockwise until it can be lifted up.

If the head of the luminaire is returned after maintenance, align it to the bollard post as shown below

and secure by tightening screw

In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out

E\DVXLWDEO\TXDOLƂHGDQGWUDLQHGSURIHVVLRQDO

Warning:

Do not open the luminaire or remove the bollard head while mains supply is switched on.

The luminaire head unit Bis factory sealed, warranty will be void if opened without authorisation from WE-EF

Lighting or nominated agent.

Installation

The product must be installed and maintained by a

VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW

building/construction and/or electrical regulations and

relevant legislation.

Warning: Switch off and isolate the mains electrical

supply prior to installing and connecting the luminaire.

Notice:,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU

than the original manufacturer, then the warranty will

no longer be valid and shall become the full respon-

sibility of the modifying person/organisation. Claims

based on defects attributable to improper installation

and/or application, and the consequences thereof, are

excluded.

Installation Procedure

The luminaire is suitable for installation directly on

to an even surface, however it is recommended to

incorporate the optional planted root to ensure

maximum stability.

Switch off

and isolate the

mains electrical supply.

Checkthatrating

shownon luminaire

label

conforms

with mains electrical supply.

A suitable recess to be provided for planted root

(QVXUHWKDWDVROLGIRXQGDWLRQDVZHOODVVXIƂFLHQW

mains cable length are provided.

Remove head of luminaire

from bollard post

after loosening screw

with Torx T-20 tool and

rotating it anti-clockwise until it can be lifted up.

Set cast base

in position and secure by inserting

and tightening bolts

and the post

is attached to

the base with retention bolts

As per Fig. 2

Connect luminaire cable

to mains

supply

terminal block located on the gear tray

the

underside of the head

and is secured by the

clamp

Wiring

is as follows and should match the

labels on the

terminal block:

ON/OFF

(L = Phase, N = Neutral, = Earthing)

1-10V/DALI

(L = Phase, N = Neutral,

= Earthing, DA/DA = DALI control line,

D-/D+ = 1-10V control line).

Return head of luminaire

to bollard post

and

secure by tightening screw

Torque:

Screw Torque

M4 max. 2.0 Nm

M5 max. 4.0 Nm

M6 max. 6.0 Nm

M8 max. 15.0 Nm

M16 max.100.0 Nm

Fig. 1

Fig. 2

TO9235W0218 © WE-EF 2018

7HFKQLFDOVSHFLƂFDWLRQVDUH

subject to change.

www.we-ef.com

WE-EF LEUCHTEN

Germany

Tel +49 5194 909 0

Fax +49 5194 909 299

info.germany@we-ef.com

WE-EF LUMIERE

France

Tel +33 4 74 99 14 44

Fax +33 4 74 99 14 40

info.france@we-ef.com

WE-EF HELVETICA

Switzerland

Tel +41 22 752 49 94

Fax +41 22 752 49 74

info.switzerland@we-ef.com

WE-EF LIGHTING

United Kingdom

Tel +44 844 880 5346

Fax +44 844 880 5347

info.uk@we-ef.com

WE-EF LIGHTING

Thailand

Tel +66 2 738 9610

Fax +66 2 175 2174

LQIRDVLDSDFLƂF#ZHHIFRP

WE-EF LIGHTING

Australia

Tel +61 3 8587 0444

Fax +61 3 8587 0499

info.australia@we-ef.com

WE-EF LIGHTING

United States of America

Tel +1 724 742 0030

Fax +1 724 742 0035

info.usa@we-ef.com

INSTALLER

HOTLINE

+61 458 933 399

7am – 7pm AEST

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere WE-EF Außenleuchte Handbücher

WE-EF

WE-EF PFL540 Bedienungsanleitung

WE-EF

WE-EF ETC100-GB LED Series Bedienungsanleitung

WE-EF

WE-EF RMC320 LED Bedienungsanleitung

WE-EF

WE-EF VFL500-SE Series Bedienungsanleitung

WE-EF

WE-EF ASP530 Bedienungsanleitung

WE-EF

WE-EF PLS420 LED Bedienungsanleitung

WE-EF

WE-EF RMM320 Bedienungsanleitung

WE-EF

WE-EF PSY414 LED Bedienungsanleitung

WE-EF

WE-EF ZTY630 LED Bedienungsanleitung

WE-EF

WE-EF QRO359 LED Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

WE-EF

WE-EF PFL230 Bedienungsanleitung

WE-EF

WE-EF RMC320 LED Bedienungsanleitung

WE-EF

WE-EF PFL230 LED Bedienungsanleitung

WE-EF

WE-EF PSY414 LED Bedienungsanleitung

WE-EF

WE-EF LSP434 Bedienungsanleitung

WE-EF

WE-EF ZFY230 LED Bedienungsanleitung

WE-EF

WE-EF ESC100 LED Series Bedienungsanleitung

WE-EF

WE-EF PIA240 LED Bedienungsanleitung

WE-EF

WE-EF ESC130 Bedienungsanleitung

WE-EF

WE-EF SLS400 Series Bedienungsanleitung

WE-EF

WE-EF RMM320 LED Bedienungsanleitung

WE-EF

WE-EF FLA441 LED Bedienungsanleitung

WE-EF

WE-EF ETV100 Series Bedienungsanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

LIGMAN

LIGMAN DE-20023 Bedienungsanleitung