Weider 9250 Bedienungsanleitung
USER'S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No.WEEVSY59220
Serial No.
(Write the serial number in the
space above for reference.)
Serial Number Decal (under seat)
www.iconeurope.com
Visit our website at
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing or damaged parts,
please call:
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: [email protected]
08457 089 009
2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TROUBLESHOOTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
CABLE DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the centre of
this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly.
WEIDER is a registered trademark of ICON Health & Fitness, Inc.
TABLE OF CONTENTS
1. Read all instructions in this manual and in
the accompanying literature before using the
weight system. Use the weight system only
as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the weight system are ade-
quately informed of all precautions.
3. The weight system is intended for home use
only. Do not use the weight system in a com-
mercial, rental, or institutional setting.
4. Use the weight system only on a level sur-
face. Cover the floor or carpet beneath the
weight system to protect the floor.
5. Make sure all parts are properly tightened
each time the weight system is used.
Replace any worn parts immediately.
6. Keep children under the age of 12 and pets
away from the weight system at all times.
7. Keep hands and feet away from moving parts.
8. Always wear athletic shoes for foot protec-
tion when using the weight system.
9. The weight system is designed to support a
maximum user weight of 136 kg (300 lbs.).
10. Never release the press arm, butterfly arms,
leg lever, lat bar, curl bar, handle, ab strap, or
ankle strap whilst weights are raised; the
weights will fall with great force.
11. Make sure that the cables remain on the pul-
leys at all times. If the cables bind whilst you
are exercising, stop immediately and make
sure that the cables are on all of the pulleys.
12. Always stand on the foot plate when per-
forming an exercise that could cause the
weight system to tip.
13. Always disconnect the lat bar from the
weight system when performing an exercise
that does not use the lat bar.
14. If you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down.
15. The decals shown here have been placed on
the weight system in the locations shown on
page 4. If a decal is missing or illegible, call
our Customer Service Department toll-free at
08457 089 009 to order a free replacement
decal. Apply the decal in the indicated loca-
tion.
WARNING:Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the weight system.
IMPORTANT PRECAUTIONS
3
• Misuse of this
product may result in
serious injury.
WARNING
!
• Read user’s manual
and follow all warnings
and operating instruc-
tions prior to use.
• Replace label if
damaged, illegible,
or removed.
• Do not allow children
on or around machine.
Decal 2
Decal 3
Decal 1
4
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER®9250
weight system. The WEIDER®9250 weight system
offers a selection of weight stations designed to devel-
op every major muscle group of the body. Whether
your goal is to tone your body, build dramatic muscle
size and strength, or improve your cardiovascular sys-
tem, the 9250 will help you to achieve the specific
results you want.
For your benefit, read this manual carefully before
using the weight system. If you have questions after
reading this manual, please call our Customer Service
Department at 0845 089 009. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WEEVSY59220. The serial number can be found on a
decal attached to the weight system (see the front
cover of this owner's manual).
Before reading further, please familiarise yourself with
the parts that are labeled in the drawing below.
DIMENSIONS:
Height: 216 cm (85 in.)
Width: 120 cm (47 1/4 in.)
Length: 142 cm (56 in.)
Foot Plate
Foot Plate
Low Pulley
Station
High Pulley Station
Lat Bar
Leg Lever
Butterfly Arm
Press Arm
Curl Pad
Left Side
Right Side
Carriage
Decal 3
Decal 2
Decal 2
Decal 1
Carriage Upright
Seat
Backrest
Note: The terms “right side” and “left side”
are determined relative to a person sitting
on the seat; they do not correspond to right
and left on the drawings in this manual.
5
Make sure you have the following tools:
• Two adjustable spanners
• One standard screwdriver
• One phillips screwdriver
• One rubber mallet
• You will also need grease or petroleum jelly, a
small amount of soapy water, and clear tape or
masking tape.
Note: Assembly will be more convenient if you have
a socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
How to Identify Parts
To help you identify the small parts used in assembly,
we have included a PART IDENTIFICATION CHART
in the centre of this manual. Place the chart on the
floor and use it to easily identify parts during each
assembly step. Note: Some small parts may have
been pre-attached. If a part is not in the parts
bag, check to see if it has been pre-attached.
How to Orient Parts
As you assemble the weight system, make sure that
all parts are oriented exactly as shown in the draw-
ings.
Tightening Parts
Tighten all parts as you assemble them, unless
instructed to do otherwise.
Questions?
If you have questions after reading the assembly
instructions, please call our Customer Service
Department at 0845 089 009.
Assembly Requires Two Persons
For your convenience and safety, assemble the
weight system with the help of another person.
Set Aside Enough Time
Due to the many features of the weight system, the
assembly process will require several hours. By
setting aside plenty of time and by deciding to
make the task enjoyable, assembly will go smoothly.
You may want to assemble the weight system over
a couple of evenings.
Select a Location for the Weight System
Because of its weight and size, the weight system
should be assembled in the location where it will be
used. Make sure that there is enough room to walk
around the weight system as you assemble it.
How to Unpack the Box
To make assembly as easy as possible, we have
divided the assembly process into four stages. The
parts needed for each stage are found in individual
bags. Important: Wait until you begin each stage
to open the parts bag for that stage. Place all
parts of the weight system in a cleared area and
remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
Make Assembly Easier for Yourself
Everything in this manual is designed to
ensure that the weight system can be assem-
bled successfully by anyone. Before begin-
ning assembly, make sure to read the
information on this page. This brief intro-
duction will save you much more time than
it takes to read it.
The Four Stages of the Assembly Process
Frame Assembly—You will begin by assembling
the base and the uprights that form the skeleton of
the weight system.
Arm Assembly—During this stage you will
assemble the arms and the leg lever.
Cable Assembly—During this stage you will
attach the cables and pulleys that connect the
arms to the weights.
Seat Assembly—During the final stage you will
assemble the seat and the backrest.
ASSEMBLY
6
1.
Press a 40mm x 60mm Outer Cap (10) onto the
end of the Stabiliser (5). Press two 40mm x
60mm Inner Caps (27) into the ends of the Base
(4) and the Stabiliser.
Insert six M10 x 55mm Carriage Bolts (1) up
through the Base (4) and the Stabiliser (5). Place
the Base and the Stabiliser flat on the floor.
Attach the Base (4) to the Stabiliser (5) with two
M10 x 78mm Bolts (14), two M10 Washers (9),
and two M10 Nylon Locknuts (21).
2. Press the 25mm Square Inner Cap (97) into the
Front Upright (42).
Attach the Front Upright (42) to the Base (4) with
the two M10 x 55mm Carriage Bolts (1) and two
M10 Nylon Locknuts (21).
Before beginning assembly, make sure you
have read and understood the information
in the box on page 5. This introduction will
save you more time than it takes to read it.
FRAME ASSEMBLY 1
2
27
1
1
14
14
21
5
9
9
1
4
4
10
27
97
42
21
21
4
1
7
3. Attach the Support Upright (88) to the Stabiliser
(5) with the indicated two M10 x 55mm Carriage
Bolts (1) and two M10 Nylon Locknuts (21). Make
sure the Support Upright leans toward the
center of the Stabiliser.
Attach the Carriage Upright (84) to the Stabiliser
(5) with the indicated two M10 x 55mm Carriage
Bolts (1) and two M10 Nylon Locknuts (21).
Do not tighten the M10 Nylon Locknuts (21)
yet.
4. Turn the Carriage Knob (73) counter clockwise
and pull it out as far as it will go. Slide the
Carriage (89) onto the Carriage Upright (84) and
engage the Knob into one of the adjustment holes
in the Upright. Fully tighten the Knob. Make sure
the Carriage is oriented as shown. Be careful
not to scratch the decals on the Upright as
you slide the Carriage over them.
Attach the Swivel Bracket (81) to the Carriage
(89) with an M10 x 155mm Bolt (60) and an M10
Nylon Locknut (21). Do not overtighten the M10
Nylon Locknuts; the Swivel Bracket must be
able to pivot easily.
Press two 60mm Square Inner Caps (101) into
the top of the Carriage Upright (84) and the
Support Upright (88).
3
84
88
21
21
21
21 1
5
1
81
4
21
89
60
84
Adjustment
Hole
88
73
101
101
8
6. Press the Weight Tube Bumper (72) into the bot-
tom of the Weight Tube (63). Insert the Weight
Tube into the centre hole in the Weights (25).
Make sure the pin on the Weight Tube rests in
the indicated pin groove.
Lubricate the indicated holes in the Top Weight
(56). Slide the Top Weight onto the Weight
Guides (62), with the pin groove on the side
shown.
56
6
63 Pin
Lubricate
Pin
Groove
Pin
Groove
62
72
25
5. Orient the Weight Tube Bumper (62) so that the
lock holes (see drawing 6) are closer to the bot-
tom. Insert the two Weight Guides into the indi-
cated holes in the Base (4).
Secure the Weight Guides (62) to the Base with
an M10 x 155mm Bolt (60), two M10 Washers
(9), two 15mm Spacers (61), and an M10 Nylon
Locknut (21).
Slide the two Weight Bumpers (19) onto the
Weight Guides (62).
Slide the eleven Weights (25) onto the Weight
Guides (62). Have a second person hold the
Weight Guides whilst the Weights are being
put on. Make sure the pin grooves are on the
side shown.
5
4
9
9
21
60
61
62
25 Pin
Groove
19
Lock
Holes
9
9. Lubricate the M10 x 92mm Bolt (16). Attach the
Press Frame (17) to the Base (4) with the Bolt
and an M10 Nylon Locknut (21). Do not over-
tighten the Nylon Locknut; the Press Frame
must be able to pivot easily.
9
4
21
16
Lubricate
17
7. Press four 40mm x 60mm Inner Caps (27) into
the ends of the Top Frame (55).
8. Hold the Top Frame (55) on top of the Front
Upright (42) and between the Weight Guides (62).
Attach the Top Frame to the Front Upright with
two M10 x 60mm Bolts (7), two M10 Washers (9),
and two M10 Nylon Locknuts (21). Do not tight-
en the Nylon Locknuts yet.
Attach the Weight Guides (62) to the indicated
tube on the Top Frame (55) with an M10 x
155mm Bolt (60), two M10 Washers (9), and an
M10 Nylon Locknut (21).
7
8
27
55
62
42
Tube
21
21
60
9
79
55
27
27
27
10. Press a 50mm Square Inner Cap (44) into the top
of a Press Arm (46). Attach the Press Arm to the
Press Frame (17) with two M10 x 70mm Bolts
(22) and two M10 Nylon Locknuts (21).
Repeat this step with the other Press Arm
(46).
10
46
46
44
17 22
21
9
Arm Assembly
10
13. Press two 38mm Square Inner Caps (32) into the
ends of the Leg Lever (29).
Lubricate an M10 x 60mm Bolt (7). Attach the Leg
Lever (29) to the Seat Frame (36) with the Bolt
and an M10 Nylon Locknut (21). Do not over-
tighten the Nylon Locknut; the Leg Lever
must be able to pivot easily.
14. Press a 50mm Square Inner Cap (44) into the
end of the Left Butterfly Arm (47). Press a Sleeve
(105) into the round tube on the Left Butterfly
Arm.
Wet the lower end of the Left Butterfly Arm (47)
with soapy water. Slide a Large Foam Pad (45)
onto the Left Butterfly Arm.
Repeat this step with the Right Butterfly Arm
(not shown).
13
14
32
32
29
36
21
7Lubricate
47
105
45
44
11. Press a 38mm Square Inner Cap (32) into the
end of the Seat Frame (36).
Attach the Bumper (87) to the Seat Frame (36)
with the M5 x 20mm Self-tapping Screw (80).
12. Attach the Seat Frame (36) to the Front Upright
(42) with the M10 x 80mm Carriage Bolt (99) and
the Seat Knob (49).
11
12
36
32
87
80
49
42
36
99
Andere Handbücher für 9250
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Weider Heim-Fitnessstudio Handbücher
Weider
Weider 190 Tc Bench Einrichtungshandbuch
Weider
Weider WEBE08920 Bedienungsanleitung
Weider
Weider WESY29520 Bedienungsanleitung
Weider
Weider WESY96310 Bedienungsanleitung
Weider
Weider PRO 220 Bedienungsanleitung
Weider
Weider 4990 I Bedienungsanleitung
Weider
Weider WEBE0635.1 Bedienungsanleitung
Weider
Weider 8512 Bedienungsanleitung
Weider
Weider 831.150720 Bedienungsanleitung
Weider
Weider Precision 200 Bedienungsanleitung
Weider
Weider 831.159360 Bedienungsanleitung
Weider
Weider Pro 240 Bedienungsanleitung
Weider
Weider Body Works Pro 2.0 Bench Bedienungsanleitung
Weider
Weider Club C650 Bedienungsanleitung
Weider
Weider Flex 8960 Bedienungsanleitung
Weider
Weider WESY74090 Bedienungsanleitung
Weider
Weider WSAW10011.0 Bedienungsanleitung
Weider
Weider 240 Tc Bench Bedienungsanleitung
Weider
Weider 8700 I Einrichtungshandbuch
Weider
Weider PRO 900 Kurzanleitung
Beliebte Heim-Fitnessstudio Handbücher anderer Marken
Horizon Fitness
Horizon Fitness OXFORD 6 Bedienungsanleitung
Energetics
Energetics Multi Trainer 5.1 Bedienungsanleitung
Matrix
Matrix MG-PL Series Bedienungsanleitung
Reebok
Reebok Tbr2i Bedienungs- und Wartungshandbuch
Pure Fitness
Pure Fitness 8526HE Bedienungsanleitung
Bowflex
Bowflex Sport 001-6961 Bedienungsanleitung
