Weslo WLTL49907.0 Bedienungsanleitung

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

Visit our website at

www.proform.com

new products, prizes,

fitness tips, and much more!

Serial Number Decal

Model No. WLTL49907.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete cus-

tomer satisfaction. If you have

questions, or if parts are missing,

PLEASE DO NOT CONTACT THE

STORE; please contact

Customer Care.

IMPORTANT: You must note the

product model number and

serial number (see the drawing

above) before contacting us:

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MST

Sat. 8 a.m.–4 p.m. MST

ON THE WEB:

www.wesloservice.com

Write the serial number in the

space above for future reference.

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WESLO is a registered trademark of ICON IP, Inc.

WARNING DECAL PLACEMENT

The decals shown here have been placed on the

treadmill. If a decal is missing or illegible, call the

telephone number on the front cover of this man-

ual and request a free replacement decal. Apply

the decal in the location shown. Note: The decals

may not be shown at actual size.

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or persons

with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should be used only by persons

weighing 300 lbs. (136 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page

10), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor

that meets all of the specifications described

on page 10. To purchase a surge suppressor,

see your local WESLO dealer or call the tele-

phone number on the front cover of this man-

ual and order part number 146148, or see

your local electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 19 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 12).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

WARNING: Toreduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

20. Use the dumbbells only as described in this

manual. Properly store the dumbbells in the

dumbbell holders on the console when you

are not using them. If the dumbbells are im-

properly stored, they may fall off the console,

causing the user to trip.

21. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

22. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 17.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

23. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

24. Never insert any object into any opening on

the treadmill.

25. Inspect and properly tighten all parts of the

treadmill regularly.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning the

treadmill, and before performing the mainte-

nance and adjustment procedures described in

this manual. Never remove the motor hood un-

less instructed to do so by an authorized ser-

vice representative. Servicing other than the

procedures in this manual should be performed

by an authorized service representative only.

27. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

Thank you for selecting the revolutionary WESLO®

CADENCE 65 CROSSTRAINER treadmill. The

CADENCE 65 CROSSTRAINER treadmill offers an

impressive array of features designed to make your

workouts at home more enjoyable and effective. And

when you’re not exercising, the unique CADENCE 65

CROSSTRAINER treadmill can be folded up, requiring

less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

To avoid a registration fee for any service needed

under warranty, you must register the treadmill at

www.wesloservice.com/registration.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Cushioned Walking Platform

Foot Rail

Power Cord

Rear Roller

Adjustment Bolts

Console

*To purchase dumbbells (not in-

cluded), call the telephone number

on the front cover of this manual.

Fan

Dumbbell/Water Bottle Holder*

Handgrip Pulse Sensor

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

the treadmill onto its left side as shown. Partially

fold the Frame (58) so the treadmill is more sta-

ble. Do not fully fold the Frame until the

treadmill is completely assembled.

Insert an Extension Leg (89) into the base of the

Uprights (84). Hold an Extension Leg Nut (67) in

the bottom of the Extension Leg, and thread a

2.25" Extension Leg Bolt (92) with a Star

Washer (8) into the top of the Extension Leg.

Next, thread a 2.5" Extension Leg Bolt (65) with a

Star Washer (8) into the bottom of the Extension

Leg. Firmly tighten the Extension Leg Bolts.

Slide a Front Endcap (44) onto the base of the

Upright (84). Partially tighten a Front Endcap

Screw (14) into the Front Endcap and the base.

ASSEMBLY

Tohire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires

two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing

materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-perfor-

mance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or

the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on

top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver (with a shaft at

least 6" long) and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses

shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-

tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic

parts, do not use power tools for assembly.

Wheel Nut (13)–2

Wheel Nut (32)–2

1" Tek Screw (83)–2

2 1/2” Bolt (37)–2

Handrail Bolt (64)–4

Washer (38)–4

31/2” Bolt (45)–4

Star Washer

(106)–4

Extension Leg Bolt (96)–4

3 ( )

Star Washer

(84)–2

Star Washer (8)–8

Extension Leg Nut (67)–2

Screw (3)–11

Handrail Bolt (64)–4

Ground Screw

(33)–1

Front Endcap

Screw (14)–2

Extension Leg Bolt (96)–4

2.5" Extension Leg Bolt (65)–2

2.25" Extension Leg Bolt (92)–2

4. With the help of a second person, carefully raise

the Uprights (84) to a vertical position.

Have the second person hold the Handrail (20)

near the Uprights (84). Insert the Wire Harness

(77) into the hole in the bottom of the Handrail

and out of the top as shown.

Next, set the Handrail (20) on the Uprights (84).

Do not let the Wire Harness (77) fall into the

right Upright.

Attach the Handrail (20) with four Handrail Bolts

(64) and four Star Washers (8); start all four

Handrail Bolts and then firmly tighten them.

See steps 1 and 2. Fully tighten the two

Front Endcap Screws (14).

2. With the help of a second person, carefully tip

the treadmill onto its right side. Do not fully fold

the Frame (58) until the treadmill is com-

pletely assembled.

Insert the other Extension Leg (89) into the base

of the Uprights (84). Hold an Extension Leg

Nut (67) in the bottom of the Extension Leg, and

thread a 2.25" Extension Leg Bolt (92) with a

Star Washer (8) into the top of the Extension

Leg. Next, thread a 2.5" Extension Leg Bolt (65)

with a Star Washer (8) into the bottom of the

Extension Leg. Firmly tighten the Extension

Leg Bolts.

Slide the other Front Endcap (44) onto the base

of the Upright (84). Partially tighten a Front

Endcap Screw (14) into the Front Endcap and

the base.

3. Attach two Base Pads (82) to the base of the

Uprights (84) with two 1" Tek Screws (83).

83 82

7. Set the console assembly on the Handrail (20).

Be careful to avoid pinching any of the

wires. Make sure that the ground wire (see

step 5) and the wire from the console assem-

bly (see step 6) are in the indicated channel.

Hand tighten five Screws (3) into the Handrail

(20) and the console assembly. Do not put

Screws into the two indicated holes. Start all

five Screws, but do not tighten them yet.

6. While the second person continues to hold the

console assembly, locate the wire underneath

the console assembly.

Connect the wire from the console assembly to

the Wire Harness (77). See the inset drawing.

The connectors should slide together easily

and snap into place. If the connectors do not

slide together easily and snap into place, turn

one connector and then try again. IF THE CON-

NECTORS ARE NOT CONNECTED PROP-

ERLY, THE CONSOLE MAY BE DAMAGED

WHEN THE POWER IS TURNED ON. Insert

the connectors downward into the Handrail (20).

Console Assembly

No Screws

Console

Assembly

5. While a second person holds the console as-

sembly near the Handrail (20), attach the

ground wire to the indicated hole in the Handrail

with a Ground Screw (33).

Hole

Ground

Wire

Console

Assembly

Wire

Channel

1. Remove the key from the console and unplug

the power cord.

Remove the Screw (3) and the Access Door

(76) from the back of the Console Base (85).

2. Connect the wire on the receiver (A) to the indi-

cated wire extending from the Console Base

(85). Hold the receiver so the small cylinder

is oriented as shown and is facing the

Console Base. Attach the receiver to the plastic

posts on the Access Door (76) with the two in-

cluded small screws.

3. Make sure that no wires are pinched.

Reattach the Access Door (76) with the Screw

(3). Discard the other wires included with the re-

ceiver.

9. Attach the Latch Housing (73) to the left Upright

(84) with two Screws (3); start both Screws

and then tighten them. Note: Make sure that

the large hole in the Latch Housing is on the

indicated side.

Remove the latch knob from the latch pin. Make

sure that the collar and the spring are on the

latch pin. (Note: If there are two collars, place

one on each side of the spring.) Next, insert the

latch pin into the Latch Housing (73). Then,

tighten the latch knob onto the latch pin.

If you purchase the optional chest pulse sensor (see page 16), follow the steps below to install the receiver

included with the chest pulse sensor.

Small

Cylinder 3

Wire

Small Screws

Latch

Spring

Collar

Latch Knob

10. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-

mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used

to adjust the walking belt (see page 20).

Large Hole

8. Hand tighten four additional Screws (3) into the

Handrail (20) and the console assembly. Then,

tighten all nine Screws used in step 7 and

this step; do not overtighten the Screws.

Console Assembly

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

deteriorate the walking belt and cause excessive

wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of

your treadmill being damaged, always use a surge

suppressor with your treadmill (see drawing 1 at

the right). To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and order

part number 146148, or see your local electronics

store.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could result

in damage to the control system of the treadmill. If

the control system is damaged, the walking belt

may change speed, accelerate or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current, reducing the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Important: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Ellipsentrainer Handbücher

Weslo

Weslo Momentum 610 Elliptical Bedienungsanleitung

Weslo

Weslo WLEL09910 Bedienungsanleitung

Weslo

Weslo PURSUIT E25 Bedienungsanleitung

Weslo

Weslo Momentum 800 Elliptical Kurzanleitung

Weslo

Weslo WLEL29040 Bedienungsanleitung

Weslo

Weslo WLEL31808.0 Bedienungsanleitung

Weslo

Weslo Momentum 4.0 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 800 Elliptical Benutzerhandbuch

Weslo

Weslo Momentum 615 Elliptical Bedienungs- und Wartungshandbuch

Weslo

Weslo Momentum 7.0 Ex Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 615 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum G 3.2 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 900 Fm Bedienungsanleitung

Weslo

Weslo Body Shop 9 Bedienungsanleitung

Weslo

Weslo WLEVEL28010 Bedienungsanleitung

Weslo

Weslo Eclipse 2 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 745 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum6.2 Elliptical Bedienungsanleitung

Weslo

Weslo EasyFit WLIVEL63110.0 Bedienungsanleitung

Weslo

Weslo WLEL45070 Bedienungsanleitung

Weslo

Weslo Eclipse 2 WLEMEL45071 Bedienungsanleitung

Weslo

Weslo Momentum G 3.8 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 4.0 Elliptical Bedienungsanleitung

Weslo

Weslo Momentum 605 Elliptical Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

NordicTrack

NordicTrack E 9.2 Elliptical Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung

Reebok

Reebok 1000 Zx Elliptical Bedienungsanleitung