Weslo CADENCE 1005 Bedienungsanleitung

Model No. WLTL39091

Serial No.

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com-

miffed to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts, we

will guarantee complete satis-

faction through direct assistance

from our factory.

TO AVOID UNNECESSARY DE-

LAYS, PLEASE CALL DIRECT TO

OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our Customer Hot Line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.-Fri., 6 a.m.-6 p.m. MST

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

SER'S UAL

www.wesIo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ................................................................. 2

BEFORE YOU BEGIN ....................................................................... 4

ASSEMBLY ............................................................................... 5

OPERATION AND ADJUSTMENT ............................................................. 7

HOW TO FOLD AND MOVE THE TREADMILL .................................................. 10

MAINTENANCE AND TROUBLE-SHOOTING ................................................... 12

CONDITIONING GUIDELINES ............................................................... 14

ORDERING REPLACEMENT PARTS .................................................. Back Cover

LIMITED WARRANTY ............................................................... Back Cover

Note: An EXPLODED DRAWING and PART LIST are attached in the center of this manual. Please save them for

future reference.

IMPORTANT PRECAUTIONS

WARN ING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

Place the treadmill on a level surface, with at

least eight feet of clearance behind it. Do not

place the treadmill on any surface that blocks

air openings. To protect the floor or carpet

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

9. Wear appropriate exercise clothing when

using the treadmill. Do not wear loose cloth-

ing that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet.

wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),

plug the power cord into a surge protector

(not included) and plug the surge protector

from damage, place a mat under the treadmill, into a grounded circuit capable of carrying 15

or more amps. No other appliance should be

Keep the treadmill indoors, away from mois- on the same circuit. Do not use an extension

ture and dust. Do not put the treadmill in a cord.

garage or covered patio, or near water. 11. Use only a UL-listed surge protector, rated at

15 amps, with a 14-gauge cord of five feet or

less in length. Do not use an extension cord.

12. Keep the power cord and the surge protector

6. Keep children under the age of 12 and pets away from heated surfaces.

away from the treadmill at all times. 13. Never move the walking belt while the power

7. The treadmill should not be used by persons is turned off. Do not operate the treadmill if

weighing more than 250 pounds, the power cord or plug is damaged, or if the

treadmill is not working properly. (See

8. Never allow more than one person on the BEFORE YOU BEGIN on page 4 if the tread-

treadmill at a time. mill is not working properly.)

14.Neverstartthetreadmillwhileyouarestand-

ingonthewalkingbelt.Alwaysholdthe

handrailswhileusingthetreadmill.

15.Thetreadmilliscapableof highspeeds.

Adjustthespeedinsmallincrementsto avoid

suddenjumpsin speed.

16. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill

regularly.

22. Never drop or insert any object into any

opening.

23.DANG ER: Alwaysunplugthepower

cord immediately after use, before cleaning

the treadmill, and before performing the main-

17. Never leave the treadmill unattended while it tenance and adjustment procedures de-

is running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

18. Do not attem pt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 5, and HOW TO MOVE

THE TREADMILL on page 10.) You must be

able to safely lift 45 pounds (20 kg) in order to

raise, lower, or move the treadmill.

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown below has been placed on your treadmill. If the

decal is missing, or if it is not legible, please call our Customer

Service Department, toll-free, to order a free replacement decal

(see ORDERING REPLACEMENT PARTS on the back cover of

this manual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

BEFORE YOU BEGIN

Thank you for selecting the WESLO 'R;CADENCE 1005

treadmill. The CADENCE 1005 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you're not exercising, the unique CADENCE 1005 can

be folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-800-999-3756, Monday through Friday, 6 a.m.

until 6 p.m. Mountain Time (excluding holidays). To

help us assist you, please note the product model

number and serial number before calling. The model

number of the treadmill is WLTL39091. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

Foot Rails

Accessory Tray

Handrail

Storage

LEFT SIDE

Walking Belt

Towel Rack Console

Water Bottle

Holder (Bottle

not included)

Handrail

RIGHT SIDE

Hood

Circuit

Breaker

Front Wheel

Power Cord

Rear Roller

Adjustment Bolts ncline

Leg Cushioned Walking

Platform

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small

parts used in assembly. Assembly requires the included allen wrench and your own phillips screw-

driver (_, adjustable wrench _, and sci_rs _

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Handrail Washer (16)-2

5/16" Washer (32)-2

Handrail Nut (82)-2

/\, Handrai! B°!tu(15)-2_

Extension Leg Screw (34)-2 Screw (55)-8

3 1/2" Handrail Bolt (59)-2

With the help of a second person, carefully raise the

Uprights (14), the Right Handrail (57), and the Console

Base (6) until the treadmill is in the position shown. Be

careful not to pull on the Wire Harness (26). Set the

Right Handrail on the right Upright until step 3 is com-

pleted.

Refer to the inset drawing. Insert one of the Extension

Legs (41) into the treadmill as shown. (Note: It may be

helpful to tip the Uprights (14) in the direction shown by

the arrow as you insert the Extension Leg.) Make sure

that the Base Pad (36) is on the bottom of the Extension

Leg. Attach the Extension Leg with an Extension Leg

Screw (34). Be sure to push on the head of the

Extension Leg Screw while tightening it,

Attach the other Extension Leg (41) in the same way.

2. Without removing the tape from the Latch (12), attach the

Latch to the left Upright (14) with four Screws (55). Make

sure that the Screws are tight, but do not overtighten

them; if the Screws are overtightened, the Latch will

not slide smoothly, After the Latch is attached, remove

any visible tape.

Note: The inset drawing shows how the parts of the Latch

(12) fit together.

2 14

Bracket

3. Cut the plastic tie holding the cage nut in the upper end of

Left Handrail (2).

Position the Left Handrail (2) on the left Upright (14). The

lower end of the Left Handrail should be on the outside of

the Extension Leg (41) as shown. Thread a Handrail Bolt

(15) with a Handrail Washer (16) into the left Upright and

the Left Handrail. Do not tighten the Handrail Bolt yet,

Attach the lower end of the Left Handrail (2) to the

Extension Leg (41) with a 3 1/2" Handrail Bolt (59), a

5/16" Washer (32), and a Handrail Nut (82). Do not

tighten the Handrail Bolt yet,

4. With the help of a second person, lift the Right Handrail

(57) off the right Upright (14). Hold the Console Base (6)

and the Right Handrail in the position shown. Feed all of the

excess Wire Harness (26) into the Right Handrail, through

the indicated bracket, and down into the right Upright; bend

the Wire Harness, if necessary.

Cut the indicated plastic tie off the Right Handrail (57).

Make sure that the Wire Harness (26) is in the bracket and

insert the bracket into the right Upright (14). Make sure

that the Wire Harness is not pinched,

5. Thread a Handrail Bolt (15) with a Handrail Washer (16)

into the right Upright (14) and the Right Handrail (32). Do

not tighten the Handrail Bolt yet,

Attach the lower end of the Right Handrail (32) to the

Extension Leg (41) with a 3 1/2" Handrail Bolt (59), a 5/16"

Washer (32), and a Handrail Nut (82).

Tighten all parts used in this step and in step 3,

6. Attach the Console Base (6) to the Left and Right

Handrails (2, 57) with four Screws (55).

Make sure that all parts are tightened before you use

the treadmill. Keep the included allen wrench in a safe

place. The allen wrench is used to adjust the walking belt

(see page 13). To protect the floor or carpet, place a mat

under the treadmill.

Bracke_

iii/

--14

32--"

---14

__ _ _<__ 59

57 /

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. They will deteriorate the walking belt and

cause excessive wear,

HOW TO PLUG IN THE POWER CORD

DANG ER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grou nded. Do not modify

the plug provided with the product--if it will

not fit the outlet, have a proper outlet in-

stalled by a qualified electrician.

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home's power.

Voltage surges, spikes, and noise interference can re-

sult from weather conditions or from other appliances

being turned on or off.

To decrease the pos-

sibility of your tread- 1

mill being damaged,

always use a surge

protector (not in-

cluded) with your

treadmill,

Surge protectors are

sold at most hardware

stores and department

stores. Use only a UL-

listed surge protector,

rated at 15 amps, with a

14-gauge cord of five

feet or less in length.

This product must be

grounded. If it should

malfunction or break

down, grounding pro-

vides a path of least re-

sistance for electric cur-

rent to reduce the risk of

electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an ap-

propriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

.3rounded Outlet

j Adapter

Metal Screw_

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded out-

let is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter,

g Pin

Treadmill Power

Groundin( Plug Surge Protector

DIAGRAMOFTHECONSOLE

ACAUTION: Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turning

on the power.

• Adjust the speed in small increments.

• The training zones marked around the speed

control are general guidelines only. See page

14 or more information.

•Always wear the clip (see the drawing above) •To reduce the possibility of electric shock, keep

while operating the treadmill. When the key is the console dry. Avoid spilling liquids on the

removed from the console, the walking belt will console and use only a sealable water bottle.

stop.

BATTERY INSTALLATION

The console requires two "AA" batteries (not in-

cluded). Alkaline batteries are recommended. To in-

stall batteries, open the battery cover as shown below.

Press two batteries into the battery compartment, with

the negative (-) ends of the batteries touching the

springs. Close the battery cover, push up on the tab,

and then push the tab forward as shown. Be sure that

the tab locks into place.

Battery Cover

Battery

Cover Tab

STEP BY STEP CONSOLE OPERATION

Step onto the foot rails of the treadmill. Find the clip

attached to the key (see the drawing above), and slide

the clip onto the waistband of your clothing. Follow the

steps below and on page 9 to operate the console.

i] Note: Inserting the key

will not turn on the dis-

play. The display will

turn on when the

ON/RESET button is

pressed or when the

walking belt is started.

(If you just installed

Insert the key fully into the power switch.

ON OFF

Ak V

batteries, the display will already be on.)

BReset the console and start the walking belt.

Turn the speed

control to the RESET

position. Note: Each

time the walking belt

is stopped, the

speed control must

be turned to the

RESET position be-

fore the walking belt

can be restarted.

Next, slowly turn the speed control until the walk-

ing belt begins to move at slow speed. Carefully

step onto the walking belt and begin exercising.

Change the speed of the walking belt as desired

by turning the speed control.

To stop the walking belt, step onto the foot rails

and turn the speed control to the RESET position.

[_1 Follow your progress with the monitor modes

When the power is

turned on, the con-

sole will automatically

scan through five

modes. A flashing

mode indicator will

show which mode is

currently displayed.

The modes are described below.

PULS£ CAL$ FAT CALS

-I I-.r rl

SP_ED T_E DIST

Mode Indicator

• Speed--This mode shows your speed, in miles

per hour.

• Time--This mode shows the elapsed time. Note:

If you stop exercising for ten seconds or longer,

the time mode will pause.

• Distance (DIST)--This mode shows the total

number of miles you have walked or run.

• Fat Calories (FAT CALS)--This mode shows the

approximate number of fat calories you have

burned. (See FAT BURNING on page 14.)

• Calories (CALS)--This mode shows the approxi-

mate number of calories you have burned.

• Pulse--This mode shows your heart rate.

If desired, reset the display by pressing the

ON/RESET button.

BTo measure your

pulse, stand on

the foot rails and

place your

thumb on the

pulse sensor as

shown. The

pulse sensor is

Measure your pulse, if desired.

Pulse Sensor

pressure activated--fully press it down. Do not

press too hard, or the circulation in your thumb

will be restricted, and your pulse will not be de-

tected. Next, raise

your thumb slightly

until the heart-shaped

indicator in the pulse

display flashes

steadily. Hold your

thumb at this level.

After a few seconds,

three dashes will appear in the display and your

pulse will be shown. Hold your thumb on the sen-

sor for another 15 seconds for the most accurate

reading.

PULSE CAL$ FATCALS

$P_ t'lM_ D_$7

Pulse Indicator

If the displayed pulse appears to be too high or too

low, or if your pulse is not displayed, lift your thumb

off the sensor and allow the display to reset. Press

down again on the sensor as described above.

Make sure that your thumb is positioned as

shown, and that you are applying the proper

amount of pressure. Try the sensor several times

until you become familiar with it. Remember to

stand still while measuring your pulse.

To change the incline,

press the top or bottom of

the incline control until the

desired incline level is

reached.

[_=.'_Adjust the incline of the treadmill as desired.

PO I,VE R INCLJN£

r_When you are finished exercising, stop the

walking belt and remove the key.

Step onto the foot rails, stop the walking belt and

remove the key from the console. The displays will

turn off about six minutes after the key is removed.

Note: The display will automatically turn off in

order to conserve the batteries any time that

the walking belt is stopped and the ON/RESET

button is not pressed for six minutes.

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. Caution: You must be able to

safely lift 45 pounds (20 kg) in order to raise, lower, or

move the treadmill.

1. Hold the treadmill with your hands in the locations shown at

the right. Caution: To decrease the possibility of injury,

bend your legs and keep your back straight, As you

raise the treadmill, make sure to lift with your legs

rather than your back, Raise the treadmill about halfway to

the vertical position. !

2. Move your right hand to the position shown and hold the

treadmill firmly. Press out on the storage latch. Raise the

treadmill until the storage latch closes over the catch.

Make sure that the storage latch is fully engaged over

the catch,

To protect the floor or carpet from damage, place a mat

under the treadmill. Keep the treadmill out of

direct sunlight. Do not leave the treadmill in the stor-

age position in temperatures above 85° Fahrenheit.

Closed

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor-

age position as described above. Make sure that the stor-

age latch is closed fully over the catch,

1. Hold the handrails and place one foot on the base as

shown.

2. Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location. Never

move the treadmill without tipping it back, To reduce

the risk of injury, use extreme caution while moving the

treadmill. Do not attempt to move the treadmill over an

uneven surface.

3. Place one foot on the base, and carefully lower the tread-

mill until it is resting in the storage position.

Front Wheels

Andere Handbücher für CADENCE 1005

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo WLTL45312 Bedienungsanleitung

Weslo

Weslo 78e 831.29522.0 Bedienungsanleitung

Weslo

Weslo WLTL33090 Bedienungsanleitung

Weslo

Weslo WLTL19010 Bedienungsanleitung

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 1016 Ets Bedienungsanleitung

Weslo

Weslo Crosswalk 5.2t Treadmill Bedienungsanleitung

Weslo

Weslo WLTL45310 Bedienungsanleitung

Weslo

Weslo Cadence 25 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 4.0 Bedienungsanleitung

Weslo

Weslo Cadence 900 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 725 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 75 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 935 Treadmill Bedienungsanleitung

Weslo

Weslo compact SL Bedienungsanleitung

Weslo

Weslo Cadence C6 Treadmill Bedienungsanleitung

Weslo

Weslo Cadense 80 Bedienungsanleitung

Weslo

Weslo Cadence S 8 Kurzanleitung

Weslo

Weslo Cadence 630 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungsanleitung

Weslo

Weslo Cadence J2.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 920 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung