Weslo CADENCE CT 5.8 WLTL27308.1 Bedienungsanleitung

USER'S MANUAL

Serial

Number

Decal

Model No. WLTL27308.1

Serial No.

QUESTIONS?

f you have questions, or if parts are

damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Write the serial number in the

space above for future reference.

www.weslo.com

TABLE OF CONTENTS

WARNNGDECALPLACEMENT ..............................................................2

MPORTANTPRECAUTONS .................................................................3

BEFOREYOUBEGN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATONANDADJUSTMENT ............................................................13

HOWTOFOLDANDMOVETHETREADMLL ..................................................18

TROUBLESHOOTNG ......................................................................20

EXERCSEGUDELNES ...................................................................22

PARTLST ...............................................................................23

EXPLODEDDRAWNG .....................................................................24

ORDERNGREPLACEMENTPARTS ..................................................BackCover

LMTEDWARRANTY...............................................................BackCover

WESLO is a registered trademark of CON P, nc.

This drawing shows the locations of the warning

decals. If a decal is missing or illegible, call the

telephone number on the front cover of this

manual and request a free replacement decal.

Apply the decal in the location shown. Note:

The decals may not be shown at actual size.

WARNING DECAL PLACEMENT

(Placed on the

wire harness)

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over age 35 or persons with

pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 13),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 13. To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and

order part number 146148, or see your local

electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 20 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

page 15).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

19. Never leave the treadmill unattended while it

is running. Always remove the key, unplug the

power cord, and switch the reset/off circuit

breaker to the “off” position when the tread-

mill is not in use. (See the drawing on page 5

for the location of the reset/off circuit breaker.)

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 18.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. Inspect and properly tighten all parts of the

treadmill regularly.

24. Never drop or insert any object into any

opening on the treadmill.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

26. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

27. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO®CADENCE

CT 5.8 treadmill. The CADENCE CT 5.8 treadmill of-

fers a selection of features designed to make your

workouts at home more effective. And when youʼre not

exercising, the unique treadmill can be folded up, re-

quiring less than half the floor space of other tread-

mills.

For your benefit, read this manual carefully before

using the treadmill. f you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Reset/Off

Circuit Breaker

Power Cord

ncline Pin/Leg

Walking Belt

Motor Hood

Wheel

Foot Rail

dler Roller

Adjustment Bolts

Accessory Tray

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of

the walking belt or the shipping carton. This does not affect treadmill performance. f there is lubricant on top of

the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART L ST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

M10 x 110mm Bolt (1)–2

M10 x 80mm Bolt (4)–2

M10 x 58mm Bolt (2)–4

M10 Star

Washer (11)–2

M8 x 52mm Bolt (8)–2

M4.2 x 19mm

Screw (5)–6

M5 x 16mm

Screw (9)–2

M10 Nut

(15)–2

M5 Star

Washer (13)–2

M8 Nut

(16)–2

M8 Washer

(10)–4 M10 Washer

(12)–2

M8 x 16mm

Bolt (3)–6

M4.2 x 19mm

Tek Screw (6)–6

5/16" Star

Washer (14)–6

#10 x 1" Tek

Screw (7)–2

1. Make sure that the power cord is unplugged.

Attach the six Base Feet (90) to the bottom of

the Base (91) with six M4.2 x 19mm Tek Screws

(6).

3. Have a second person hold the Base (91) in the

position shown.

dentify the Right Upright (87), which has a large

hole near the lower end. Orient the Right

Upright as shown. Attach the Right Upright to

the Base (91) with two M10 x 58mm Bolts (2).

Do not tighten the Bolts yet.

Attach the Left Upright (86) to the Base (91)

in the same way. Orient the small holes as

shown.

91 6

2. Attach each Wheel (92) to the Base (91) with an

M10 x 80mm Bolt (4) and an M10 Nut (15).

Small

Holes

Large

Hole

5. Have a second person lift and hold the front end

of the Frame (61). Hold an Upright Spacer (88)

between the Right Upright (87) and the Frame.

Attach the Right Upright to the Frame with an

M10 x 110mm Bolt (1), an M10 Washer (12), and

an M10 Star Washer (11). Do not tighten the

Bolt yet.

Repeat this step on the left side of the tread-

mill.

4. With the help of a second person, raise the

Uprights (86, 87) so the Base (91) is flat on the

floor as shown. Next, position the front of the

Frame (61) between the Uprights.

See the inset drawing. Locate the wire tie in-

side of the lower end of the Right Upright (87).

Tie the wire tie securely around the Wire

Harness (83). Then, pull the upper end of the

wire tie until the end of the Wire Harness is ex-

tending from the upper end of the Right Upright.

83 8387

Wire

Tie

6. dentify the Left Handrail Cover (80) and the

Right Handrail Cover (81). nsert the end of the

Left Handrail (79) through the large hole in the

Left Handrail Cover, and insert the end of Right

Handrail (82) through the large hole in the Right

Handrail Cover.

Attach the Handrail Covers (80, 81) to the

Handrails (79, 82) with two M4.2 x 19mm

Screws (5) in the locations shown. 5

Hole

7. Set the Console (94) face down on a soft sur-

face to avoid scratching the Console. Hold the

Right Handrail (82) near the Console as shown.

nsert the console wire into the large hole in the

side of the Right Handrail and out of the hole in

the top as shown.

Large

Hole

Console

Wire

8. Attach the Right Handrail (82) to the Console

(94) with an M5 x 16mm Screw (9), an M5 Star

Washer (13), and two M4.2 x 19mm Screws (5).

Make sure that no wires are pinched. Start all

three Screws before tightening any of them.

Tighten the M5 x 16mm Screw and then

tighten the M4.2 x 19mm Screws. Do not

overtighten the Screws.

Attach the Left Handrail (79) to the other side

of the Console (94) in the same way. Note:

There are no wires on the left side of the

Console.

Remove the plastic ties from the Right Handrail

(82) and the Left Handrail (79). f necessary,

press the M8 Cage Nuts (41) into place.

9. Have a second person hold the Console (94)

near the Right Upright (87) and the Left Upright

(not shown).

Connect the Wire Harness (83) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. f they do not, turn one connector and try

again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS

TURNED ON. Remove the wire tie from the

Wire Harness. nsert the connectors and excess

wire into the Right Upright (87).

Next, insert the brackets on the Right Handrail

(82) and the Left Handrail (not shown) into the

Right Upright (87) and the Left Upright (not

shown). Make sure that no wires are pinched. 87

Console

Wire

Tie

Console

Wire

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 255 Dr Treadmill Bedienungsanleitung

Weslo

Weslo Cadence J2.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence ex14 Bedienungsanleitung

Weslo

Weslo WLTL19012 Bedienungsanleitung

Weslo

Weslo easy compact 2 WETL20709.0 Bedienungsanleitung

Weslo

Weslo WCTL29607.0 Bedienungsanleitung

Weslo

Weslo Crosswalk Pro 14.2t Bedienungsanleitung

Weslo

Weslo Cadence G 7.0 WLTL39810.0 Bedienungsanleitung

Weslo

Weslo Cadence 200 Bedienungsanleitung

Weslo

Weslo WLTL41582 Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Konfigurationshandbuch

Weslo

Weslo Cadence 200 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence S 8 Benutzerhandbuch

Weslo

Weslo Cadence 5.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 450v Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE c22 Bedienungsanleitung

Weslo

Weslo Cadence 400 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence R20 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence Ts5 Bedienungsanleitung

Weslo

Weslo CADENCE 880 Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Benutzerhandbuch

Weslo

Weslo G-30 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 25 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung