Weslo Cadence 6.0 Treadmill Bedienungsanleitung

USER'S MANUAL

Serial Number Decal

QUESTIONS?

If you have questions, or if parts are

damaged or missing, DO NOT CON-

TACT THE STORE; please contact

Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.weslo.com

Model No. WLTL22306.1

Serial No.

Write the serial number in the space

above for future reference.

WESLO is a registered trademark of ICON IP, Inc.

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBEGIN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATIONANDAD USTMENT ............................................................10

HOWTOFOLDANDMOVETHETREADMILL ..................................................14

TROUBLESHOOTING ......................................................................16

EXERCISEGUIDELINES ...................................................................18

PARTLIST ...............................................................................21

EXPLODEDDRAWING .....................................................................22

ORDERINGREPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY...............................................................BackCover

These drawings show the locations of the warning

decals. If a decal is missing or illegible, call the

telephone number on the front cover of this

manual and request a free replacement decal.

Apply the decal in the location shown. Note:

The decals may not be shown at actual size.

WARNING DECAL PLACEMENT

•Hazardous Voltage

•Risk of Electric Shock

•Unplug Treadmill before Assembly

/Disassembly.

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over age 35 or persons with

pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 10),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 10. To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and

order part number 146148, or see your local

electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 16 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 11).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

18. Use the included dumbbells only as de-

scribed in this manual. Properly store the

dumbbells in the dumbbell holders on the

console when you are not using them. If the

dumbbells are improperly stored, they may

fall off the console, causing the user to trip.

19. Do not use the dumbbells at speeds faster

than walking speeds. Using dumbbells and

not holding the handrails may compromise

your ability to maintain your balance.

Exercises using dumbbells should be at-

tempted only by experienced users.

20. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

21. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and press the power switch

into the off position when the treadmill is not

in use. (See the drawing on page 5 for the lo-

cation of the power switch.)

22. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 14.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

23. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

24. Do not change the incline of the treadmill by

placing objects under the treadmill.

25. Inspect and properly tighten all parts of the

treadmill regularly.

26. Never drop or insert any object into any

opening on the treadmill.

27. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

28. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

29. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO®CADENCE

60 CT treadmill. The CADENCE 60 CT treadmill offers

aselection of features designed to make your workouts

at home more effective and enjoyable. And when youʼre

not exercising, the treadmill can be folded up, requiring

less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Latch Assembly

Console

Key/Clip

Power Switch

Incline Pin

Incline Leg

Walking Belt

Motor Hood

Wheel

Foot Rail

Idler Roller

Adjustment Bolts

Dumbbell/Water Bottle Holder

(water bottle is not included)

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re-

quires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of

the packing materials until assembly is completed. Do not remove the long wire inside the Right Handrail until

instructed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During

shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal

and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubri-

cant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver , adjustable

wrench , and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-

aging parts, do not use power tools for assembly. Extra hardware may be included.

Frame Bolt (10)–2

Wheel Bolt (14)–2

Console Screw

(70)–4

Nut (17)–4

Base Pad

Screw (42)–6

Handrail Washer

(30)–6

Handrail Bolt (12)–4

Wheel Nut

(83)–2

Handrail Star

Washer (60)–2

16mm Screw

(58)–6

1. Attach the six Base Pads (19) to the bottom of the Base

(71) with six Base Pad Screws (42). Note: The Base

Pads may be preassembled.

71 42

42 19

•Hazardous Voltage

•Risk of Electric Shock

•Unplug Treadmill before Assembly

/Disassembly.

2. Have a second person hold the Base (71) in the position

shown.

Identify the Right Handrail (6) which has a large hole

near the lower end.

Hold the Right Handrail (6) so that the bend is in the

position shown. Insert two Handrail Bolts (12) into

the bracket on the Right Handrail. Attach the Right

Handrail to the Base (71) with the Handrail Bolts, two

Handrail Washers (30), and two Nuts (17). Do not

tighten the Nuts yet.

Attach the Left Handrail (7) to the Base (71) in the

same way.

Large

Hole

Bend

4. Have a second person lift and hold the front end of the

Frame (55). Hold a Frame Spacer (13) between the Right

Handrail (6) and the Frame. Attach the Right Handrail to

the Frame with a Frame Bolt (10), a Handrail Washer

(30), and a Handrail Star Washer (60).

Repeat this step on the left side of the treadmill.

3. With the help of a second person, raise the Handrails

(6, 7) so the Base (71) is flat on the floor as shown.

Attach the Wheels (15) to the outer sides of the Base

(71) with two Wheel Bolts (14) and two Wheel Nuts (83)

as shown. Do not overtighten the Wheel Nuts; the

Wheels should turn freely.

Position the front of the treadmill Frame (55) between the

Handrails (6, 7) as shown. Next, locate the long wire tie

inside of the lower end of the Right Handrail (see the

inset drawing). Tie the end of the wire tie securely to the

end of the Wire Harness (22). Then, use the opposite

end of the wire tie to pull the Wire Harness through the

Right Handrail until the Wire Harness extends from the

upper end of the Right Handrail.

83 15

Wire

Tie

Wire

Tie

5. Hold the Console (1) near the Right Handrail (6). Touch

the Right Handrail to discharge any static.

Untie the wire tie from the end of the Wire Harness (22).

Insert the end of the Wire Harness through the three

looped plastic ties. Next, press the end of the Wire

Harness into the connector on the back of the Console

(1) in the location shown. The end of the Wire Harness

should slide easily into the connector and snap into

place. If it does not, turn the end of the Wire Harness and

then insert it. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY BE-

COME DAMAGED WHEN YOU TURN ON THE

POWER. Plastic

Ties

Connector

7. Attach the Console Back (4) to the Console (1) with four

16mm Screws (58). Note that there is a slot in the side of

the Console Back for the Wire Harness (22)—make sure

that no wires are pinched during this step.

Slot

6. Set the Console (1) on the Right Handrail (6) and the Left

Handrail (not shown). Tighten four Console Screws (70)

(only two are shown) into the Console; start all four

Console Screws, and then tighten each of them.

Insert the excess Wire Harness (22) downward into the

Right Handrail (6). Tighten the three plastic ties around

the Wire Harness, and then cut off the ends of the plastic

ties.

Plastic

Ties

Connector

9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys

in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or

carpet, place a mat under the treadmill.

8. Carefully lower the Handrails (6, 7) to the floor. Center

the Frame (55) between the Handrails, and tighten the

four Handrail Bolts (12). Then, raise the Handrails to the

vertical position.

See drawing 8a. Attach the Latch Assembly (41) to the

Left Handrail (7) with two 16mm Screws (58). Make sure

that the Latch Assembly is oriented as shown.

See HOW TO CHANGE THE INCLINE OF THE TREAD-

MILL on page 13.Adjust the incline legs and insert the

incline pins into the incline legs.

6, 7

OPERATION AND AD USTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like other electronic equipment, can be

damaged by sudden voltage changes in your homeʼs

power. To decrease the risk of damaging your

treadmill, always use a surge suppressor with your

treadmill (see drawing 1 at the right). To purchase

a surge suppressor, see precaution 12 on page 3.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could dam-

age the control system of the treadmill (see precau-

tion 13 on page 3).

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This productʼs power cord has an equip-

ment-grounding conductor and a grounding plug. Plug

the power cord into a surge suppressor, and plug

the surge suppressor into an appropriate outlet

that is properly installed and grounded in accor-

dance with all local codes and ordinances.

IMPORTANT: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit

(see drawing 1). A temporary adapter may be used to

connect the surge suppressor to a 2-pole receptacle if

a properly grounded outlet is not available (see draw-

ing 2).

The temporary adapter should be used only until a

properly grounded outlet (see drawing 1) can be in-

stalled by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

The adapter must be held in place by a metal screw.

Some 2-pole receptacle outlet box covers are not

grounded. Contact a qualified electrician to deter-

mine if the outlet box cover is grounded before

using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor in-

creases the risk of electric shock. Check with

a qualified electrician or serviceman if you

are unsure whether the product is properly

grounded. Do not modify the plug—if it will

not fit the outlet, have a proper outlet in-

stalled by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Grounding Plug

Andere Handbücher für Cadence 6.0 Treadmill

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo WLTL62790 Bedienungsanleitung

Weslo

Weslo CADENCE G 3.9 Bedienungsanleitung

Weslo

Weslo Cadence 4500 Bedienungsanleitung

Weslo

Weslo Cadence LS 8 Bedienungsanleitung

Weslo

Weslo WLTL11093 Bedienungsanleitung

Weslo

Weslo Cadence 4.9 Ery Treadmill Bedienungsanleitung

Weslo

Weslo 2100 Bedienungsanleitung

Weslo

Weslo Cadence 85 Bedienungsanleitung

Weslo

Weslo Cadence 630 Kurzanleitung

Weslo

Weslo Relay Relay 660 Bedienungsanleitung

Weslo

Weslo Cadence 2050 Bedienungsanleitung

Weslo

Weslo Crosswalk G 3.2 Treadmill Bedienungsanleitung

Weslo

Weslo CARDIO WALK Bedienungsanleitung

Weslo

Weslo WETL21021 Bedienungsanleitung

Weslo

Weslo WLTL39092 Bedienungsanleitung

Weslo

Weslo Cadence 400 Treadmill Systemhandbuch

Weslo

Weslo Cadence exi8 WLTL49200 Bedienungsanleitung

Weslo

Weslo WLTL99616C.0 Bedienungsanleitung

Weslo

Weslo WLTL19306.0 Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL39321 Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence G 7.0 WLTL39810.0 Bedienungsanleitung

Weslo

Weslo Cadence Sl 20 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung