Weslo CADENCE C44 Bedienungsanleitung

Model No. WLTL29305.0

Serial No.

Write the serial number in the

space above for future reference.

Serial

Number

Decal!

QUESTIONS?

As a manufacturer, we are corn =

mitted to providing complete

customer satisfaction, if you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL=FREE:

1-866-699-3756

Mon.-gri., 6 a.m.-6 p.m. MST

ON THE WEB:

www.wesloservice.com

www.wesIo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

iMPORTANT PRECAUTIONS ................................................................ 3

BEFORE YOU BEGIN ...................................................................... 5

ASSEMBLY .............................................................................. 6

OPERATION AND ADJUSTMENT ............................................................ 10

HOW TO FOLD AND MOVE THE TREADMILL ................................................. 14

MAINTENANCE AND TROUBLESHOOTING ................................................... 16

CONDiTiONiNG GUiDELiNES .............................................................. 18

ORDERING REPLACEMENT PARTS ................................................. Back Cover

LiMiTED WARRANTY .............................................................. Back Cover

Note: A PART iDENTiFiCATiON CHART an EXPLODED DRAWING, and a PART LiST are attached in the

center of this manual.

WESLO is a registered trademark of iCON IP, inc.

iMPORTANT PRECAUTIONS

The decals shown here have been placed on your treadmiJl, if adecaJ is missing, or if it is not legible,

call the toll-free telephone number on the front cover of this manual and order a free repJacement decal

AppJy the decaJ in the Jocation shown. Note: The decaJs are not shown at actuaJ size.

P_otectyoursell end

others from risk of serious

Jniury. Read the user's

manual ar{d :

_,_ Stand onlyon lhe

sde rails when

stading or stopping

treadmill¸

,Change s_eed in

&m_ll _nc_ements

.Hold h_ndrails to

ope_at ng treadmill

mill s moved ol

s_ored

•Reauce Jr*clineto its

Iowes_levelbefore

foldin_ t_e_dmill Lnto

storage pos_t_on

notin use

,Never tryto adjust

or f_xthe beltwh_le

it is moving

,Always wear

_thlefic shoes while

ope_ting treadmill

BEFORE YOU BEGIN

Thank you for selecting the WESLO _ CADENCE C44

treadmill. The CADENCE C44 treadmill combines

advanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you're not exercising, the unique CADENCE C44 can

be folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

you use the treadmill, if you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before calling. The model

number of the treadmill is WLTL29305.0. The serial

number can be found on a decal attached to the

treadmill (see the front cover of this manual for the

location).

To avoid a registration fee for any service needed

under warranty, you must register the treadmill at

www.wesloservice.com/registration.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

Accessory Tray

Console

Bottle Holder*

Storage

Key/Clip

Handrails

Walking Belt

Foot Rails

Upright

FRONT

Reset/Off

Circuit Breaker

BACK RIGHT SiDE

Rear Roller

Adjustment Bolts

*No water bottle is included

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not

affect treadmill performance. Jfthere is lubricant on top of the walking belt, simply wipe off the lubricant with a

soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wre'nches _ and your own_hillips screwdriver C_ =====_,

two adjustable wrenches _ , and needlenose pliers _ .

To identify the assembly hardware, see the PART iDENTiFiCATiON CHART in the center of this manual.

1. Attach six Base Pads (63) to the undersides of the Base

(46) and the Extension Legs (56) with six 3/4" Tek

Screws (3). Note: There are small holes for attaching the

Base Pads only in the undersides of the Base and the

Extension Legs.

2. Insert an Extension Leg (56) into each end of the Base

(46). Attach each Extension Leg with two Extension Leg

Screws (89).

Attach a Wheel (68) to the outer side of each Extension

Leg (56) with a Wheel Bolt (67), a 3/8" Washer (66), and

a 3/8" Nut (61) as shown. Note: Do not overtighten the

Wheel Bolts; the Wheels should turn freely.

56 46

3. Have a second person hold the Base (46) in a vertical

position as shown. Hold the Right Upright (62) against

the Base so the indicated large hole is in the position

shown. Attach the Right Upright with two Upright Bolts

(65), two 3/8" Washers (66), and two 3/8" Nuts (61) as

shown. Do not tighten the Upright Bolts yet.

Attach the Left Upright (not shown) to the Base (46) in

the same way. Note: The Left Upright does not have a

large hole.

62 \

65_,

Large

Hole

4. Hold a Frame Spacer (27) against the right side of the

Frame (79) as shown. Insert a Frame Bolt (70) into the

frame bolt hole in the Upright Spacer and the Frame.

Next, tighten a Spacer Screw (45) into the Upright

Spacer and the Frame. Then, remove the Frame Bolt.

Repeat this step on the other side of the Frame.

5. Position the Base (46) over the Frame (79) as shown.

Insert the Wire Harness (60) into the large hole in the

Right Upright (62) and out of the top.

Large

79 Hole

6. Raise the Right Upright (62) and the Left Upright (not

shown) so the Base (46) is flat on the floor. Make sure

that the upper end of the Wire Harness (not shown)

does not fall into the Right Upright.

With the help of a second person, lift and hold the Frame

(79) between the Right Upright (62) and the Left Upright

(not shown). Finger tighten a Frame Bolt (70) with a

Washer (66) and a 3/8" Star Washer (29) through the

Right Upright and the Frame Spacer (27) and into the

Frame. Do not tighten the Frame Bolt yet. Repeat this

step on the left side of the treadmill.

29 66

7. Hold one of the Handrails (59) near the Right Upright

(62). Route the Wire Harness (60) into the hole in the

bottom of the Handrail and out of the hole in the left side

as shown. Then, remove the colored tie from the end of

the Wire Harness.

Set the Handrail (59) on the Right Upright (62), and tight-

en a Handrail Bolt (42) with a 5/16" Star Washer (78) into

the Handrail and the Right Upright. Make sure that the

Wire Harness (60) does not get pinched. Firmly tighten

the Handrail Bolt. Attach the end of the ground wire to

the Handrail with the Silver Ground Screw (69).

Attach the other Handrail (not shown) to the Left Upright

(not shown) as described above. Note: There is not a

wire on the left side.

Ground

59\

8. Set the Console Base (52) on the Handrails (59). Thread

four 3/4" Screws (2) into the Handrails and the Console

Base. After you have started all four Screws, tighten the

Screws until they are snug; do not overtighten the

Screws. Note: It may be helpful to press down on the

top of the Console Base above the Handrails as you

tighten the Screws.

insert the Wire Harness (60) through the two indicated

plastic ties on the Console Base (52) and up through the

opening in the Console Base as shown.

59 60 52 59

Hold the Console (55) near the Console Base (52).

Touch the right Handrail (59) to discharge any static.

insert the Wire Harness (60) through the plastic tie

labeled "C" in the drawing at the right. Next, locate the

connector on the Wire Harness. Plug the Wire Harness

into the connector labeled "A" in the drawing at the right

and in the inset drawing. The connectors should slide

together easily and snap into place. If they do not,

turn the connector on the Wire Harness and try again. IF

THE CONNECTOR IS NOT INSERTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN THE

POWER IS TURNED ON.

Pull any slack in the Wire Harness (60) through the plas-

tic tie labeled "C," and securely tighten the plastic tie

around the Wire Harness. Cut off the end of the plastic

tie.

10. Set the Console (55) in the Console Base (52). Make

sure that no wires are pinched. Insert as much of the

Wire Harness (60) as possible down into the hole in the

right Handrail (59). Securely tighten the plastic tie

nearest to the right Handrail. Next, pull any excess

Wire Harness between the plastic ties tight, and tighten

the other plastic tie. Cut off the ends of the plastic ties.

Attach the Console (65) to the Console Base (52) with

five 3/4" Screws (2) in the locations shown. Note: There

should not be a Screw in the hole indicated by the

arrow. Do not overtighten the Screws.

Ties 52

Screw

11. Lower the Uprights (53, 62) until the Handrails (59) are

touching the floor.

See the lower drawing. Position the Uprights (53, 62) so

the treadmill Frame (79) is centered between them.

Firmly tighten the four Upright Bolts (65) and the two

Frame Bolts (70). Be careful not to overtighten the

Frame Bolts.

11 70

53, 62 \

Top View

, __ 53

12. With the help of a second person, carefully raise the

Left Upright (53) and Right Upright (not shown), to a

vertical position. Attach the Storage Latch (48) to the

Left Upright (53) with two 3/4" Screws (2).

13. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep

the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt (see page

17). To protect the floor or carpet, place a mat under the treadmill.

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant, iMPORTANT: Never apply sil-

icone spray or other substances to the walking

belt or the walking platform. Such substances will

deteriorate the walking belt and cause excessive

wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home's power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the pos-

sibility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see

drawing 1 at the right). To purchase asurge sup-

pressor, see your local WESLO dealer or call the

toll-free telephone number on the front cover of

this manual and order part number 146148, or see

your local electronics store.

Use only asingle-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have

a UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated

for 120 volts AC and 15 amps. There must be a

monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to

use a properly functioning surge suppressor could

result in damage to the control system of the

treadmill, if the control system is damaged, the

walking belt may change speed, accelerate or stop

unexpectedly, which may result in afall and seri-

ous injury.

This product must be grounded. If it should mal-

function or break down, grounding provides a path of

least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

suppressor, and plug the surge suppressor into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances. Important: The treadmill is not com-

patible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

IGrounded Outlet Box

_"-I -- Surge Suppressor

_'"' .... Grounding Pin

Grounding Pin

_rounded Outlet Grounding Plug

2_rounded Outlet Box

Adapter Surge Suppressor

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet

box covers are not grounded. Contact a qualified

electrician to determine if the outlet box cover is

grounded before using an adapter.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 700 Bedienungsanleitung

Weslo

Weslo Cadence 720 Benutzerhandbuch

Weslo

Weslo Cadence 600 Treadmill Systemhandbuch

Weslo

Weslo Cadence Ct10 Bedienungsanleitung

Weslo

Weslo Cadence 21.0 Cwl Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo CardioStride 2.0 Bedienungsanleitung

Weslo

Weslo CADENCE CT 5.8 WLTL27308.1 Bedienungsanleitung

Weslo

Weslo WLTL21191 Bedienungsanleitung

Weslo

Weslo Cadence 835 British Bedienungsanleitung

Weslo

Weslo CADENCE C78 Bedienungsanleitung

Weslo

Weslo Cadence Sl30 Bedienungsanleitung

Weslo

Weslo TREADMILL 831.297100 Bedienungsanleitung

Weslo

Weslo Cadence5.8 Treadmill Bedienungsanleitung

Weslo

Weslo Crosstrainer 505s Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Systemhandbuch

Weslo

Weslo Cadence 50 Ls Bedienungsanleitung

Weslo

Weslo Cadence 1016 Ets Bedienungsanleitung

Weslo

Weslo Cadence A 40 Treadmill Bedienungsanleitung

Weslo

Weslo 225 Gtx Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Kurzanleitung

Weslo

Weslo Cadence 4500 Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical null

Weslo

Weslo CADENCE 1020 WETL28090 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung