Weslo Cadence 45 Treadmill Bedienungsanleitung

USER’S MANUAL

Serial Number Decal

Model No. WETL0514.0

Serial No.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

[email protected]

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.iconeurope.com

Visit our website at

08457 089 009

Class H Fitness Product

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WESLO is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page

11), plug the power cord into an earthed cir-

cuit. No other appliance should be on the

same circuit. When replacing the fuse, an

ASTA approved BS1362 type should be fitted

to the fuse carrier. A 13 amp fuse should be

used.

11. If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur-

faces.

13. Never move the walking belt whilst the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

14. Never start the treadmill whilst you are stand-

ing on the walking belt. Always hold the

handrails whilst using the treadmill.

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

16. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and move the on/off switch to

the off position when the treadmill is not in

use. (See the drawing on page 5 for the loca-

tion of the on/off switch.)

17. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 14.)

You must be able to safely lift 20 kg (45 lbs.)

to raise, lower, or move the treadmill.

18. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. Inspect and properly tighten all parts of the

treadmill regularly.

21. Never drop or insert any object into any

opening.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorised service representative. Servicing

other than the procedures in this manual

should be performed by an authorised service

representative only.

23. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown has been placed on your treadmill. If the decal is miss-

ing, or if it is not legible, please call our Customer Service Department

and order a free replacement decal (see ORDERING REPLACEMENT

PARTS on the back cover of this manual). Apply the replacement decal in

the location shown.

Note: This decal is not shown at actual size.

Thank you for selecting the WESLO CADENCE®45

treadmill. The CADENCE 45 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE 45 tread-

mill can be folded up, requiring less than half the floor

space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please call our Customer Service

Department at 08457 089 009.To help us assist you,

please note the product model number and serial num-

ber before calling. The model number of the treadmill

isWETL0514.0. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location of the decal).

Before reading further, please review the drawing

below and familiarise yourself with the labelled parts.

BEFORE YOU BEGIN

Handrail

Console

Key/Clip

Circuit Breaker

On/Off Switch

Incline Leg

Walking Belt

Hood

Front Wheel

Foot Rail

Rear Roller

Adjustment Bolts

Water Bottle Holder

(Bottle not included)

Storage Latch

RIGHT SIDE

LEFT SIDE

ASSEMBLY

Assembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. Set

the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as-

sembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.

During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.

This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt,

simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver ,

adjustable spanner , wire cutters , and needlenose pliers .

For help identifying the assembly hardware, see the part drawings below.

WARNING: Do not plug in the power

cord until the treadmill is completely assembled.

Upright Nut

(49)–4

Wheel Nut

(61)–2

Handrail Bolt

(44)–4

3/4” Screw

(77)–12 Spacer Screw

(40)–2

Silver Ground

Screw (89)–1

5/16” Star

Washer (68)–4

3/8” Star

Washer (90)–6

Frame Bolt (36)–2

1” Tek Screw

(6)–4

Wheel Bolt (33)–2

Upright Bolt

(28)–4

1. Orient the Base (55) so the holes for the four Base Pads

(31) are on top. Attach the four Base Pads with the four

1” Tek Screws (6).

Attach the two Wheels (34) to the Base (55) with two

Wheel Bolts (33) and two Wheel Nuts (61) as shown. Do

not overtighten the Bolts; the Wheels must be able to

turn freely.

4. With the help of a second person, raise the Left and

Right Uprights (32, 37) to the vertical position.

Feed the Wire Harness (53) into the hole in the bottom of

one of the Handrails (4) and out of the large hole in the

side. Note: It may be helpful to use needlenose pliers to

pull the Wire Harness out of the hole.

Set the Handrail (4) onto the Right Upright (37). Attach

the Handrail with two Handrail Bolts (44) and two 5/16”

Star Washers (68). Firmly tighten the Bolts.

Attach the other Handrail (4) as described above. Note:

There is not a wire harness on the left side.

Hole

Bracket

2. See the inset drawing. Identify the Right Upright (37),

which has a large round hole near the lower end, and the

Left Upright (32).

Have a second person hold the Base (55) so it is resting

on the Wheels (34) as shown. Attach the Right and Left

Uprights (32, 37) to the Base with four Upright Bolts (28),

four 3/8” Star Washers (90), and four Upright Nuts (49).

Do not tighten the Bolts yet. Make sure that the large

hole in the Right Upright is in the indicated location,

and that the two small holes in the Left Upright are in

the indicated location. In addition, make sure that the

Base is oriented so the Base Pads (31) are in the lo-

cation shown.

Large

Hole

Small

Holes

Hole

3. With the help of a second person, place the Frame (21)

between the Uprights (32, 37). Feed the Wire Harness

(53) into the large round hole near the lower end of the

Right Upright (37), and then pull the Wire Harness out of

the upper end as shown.

See drawing 3a. Raise the Uprights (32, 37) to the vertical

position. Hold an Upright Spacer (58) against one side of

the Frame (21) as shown. Insert a Frame Bolt (36) into the

indicated hole in the Upright Spacer and the Frame. Next,

tighten a Spacer Screw (40) into the Upright Spacer and

the Frame. Remove the Frame Bolt. Repeat on the other

side of the Frame.

With the help of a second person, carefully lift the Frame

(21), and hold the Upright Spacers (58) between the Right

Upright (37) and the Left Upright (not shown). Align the in-

dicated hole in the Right Upright with the hole in the right

Upright Spacer. Next, insert a Frame Bolt (36) with a 3/8”

Star Washer (90) into the Right Upright and the Upright

Spacer, and loosely thread the Upright Bolt into the Frame.

Repeat this step on the left side of the treadmill.

Holes

Hole

21 53

6. Place the Console Base (45) on the Handrails (4) (only

one Handrail is shown).

Insert the Wire Harness (53) through the indicated plastic

tie on the Console Base (45). Next, insert the Wire

Harness through the opening in the Console Base.

Tie

453

8953

5. Attach the end of the ground wire on the Wire Harness

(53) to the small hole in the side of the right Handrail (4)

with a Silver Ground Screw (89).

7. Hold the Console (2) near the Console Base (45). Touch

the right Handrail (4) to discharge any static. Find the

connector on the end of the Wire Harness (53). Insert

the connector into the red socket beneath the Console.

The connector should slide easily into the socket

and snap into place. If the connector does not slide

easily and snap into place, turn the connector and

then insert it. Make sure that the connector and wires

appear as shown in drawing 7a.

8. Set the Console (2) in the Console Base (45). Make sure

that no wires are pinched.

Attach the Console (2) to the Console Base (45) with six

3/4” Screws (77). Start all six Screws before tighten-

ing them; do not overtighten the Screws.

9. Insert the excess Wire Harness (53) into the large hole in

the side of the right Handrail (4) Securely tighten the

plastic tie on the bottom of the Console Base to pre-

vent the Wire Harness from slipping. Then, cut off the

end of the plastic tie.

10. Attach the Console Base (45) to the Handrails (4) (only

one Handrail is shown) with four 3/4” Screws (77). Start

all four Screws before tightening them; do not over-

tighten the Screws.

Large Hole

Tie 53

11. Attach the Storage Latch (38) to the Left Upright (32)

with two 3/4” Screws (77). Do not overtighten the

Screws.

14. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking

belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

12. Lower the Uprights (32, 37) until the Handrails (4) are

touching the floor.

See drawing 12a. Position the Uprights (32, 37) so that

the treadmill Frame (21) is centred between the

Uprights.

Firmly tighten the four Upright Bolts (28). Then, raise the

Uprights (32, 37) back to the vertical position.

Firmly tighten all of the bolts and screws used in

assembly.

Top View

421

32, 27

13. Insert an Incline Leg (47) into the right side of the Frame

(21) as shown, and adjust the Incline Leg to the desired

height. (Note: The Incline Leg can be adjusted to any of

four positions to vary the intensity of your exercise.)

Next, fully insert an Incline Pin (46) into the Frame and

the Incline Leg, and turn the Incline Pin to the “locked”

position shown in the drawing 13a.

Insert the other Incline Leg (not shown) and Incline Pin

(46) into the left side of the Frame (21) in the same way.

CAUTION: Before using the treadmill, make sure that

both Incline Pins are fully inserted at the same

height. In addition, make sure that both Incline Pins

are inserted from the direction shown. Do not use

the treadmill without the Incline Pins.

Lower the treadmill (see HOW TO LOWER THE

TREADMILL FOR USE on page 15).

13a

12a

Andere Handbücher für Cadence 45 Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 1000 Fm Benutzerhandbuch

Weslo

Weslo Cadence 5.0 Treadmill Benutzerhandbuch

Weslo

Weslo Lyne 3500 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 75 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Einrichtungshandbuch

Weslo

Weslo Cadence M5 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence M6 Elliptical Bedienungsanleitung

Weslo

Weslo Cadence 860 Bedienungsanleitung

Weslo

Weslo WCTL25320 Bedienungsanleitung

Weslo

Weslo Cadence C32 Treadmill Bedienungsanleitung

Weslo

Weslo Pro Crosswalk 7.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence C6 Treadmill Referenzhandbuch

Weslo

Weslo WLTL33090 Bedienungsanleitung

Weslo

Weslo Cadence Ds11 Bedienungsanleitung

Weslo

Weslo Cadence 835 Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Referenzhandbuch

Weslo

Weslo Cadence 60 Se Treadmill Bedienungsanleitung

Weslo

Weslo WLTL22190 Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Bedienungsanleitung

Weslo

Weslo Easy compact 2 treadmill Bedienungsanleitung

Weslo

Weslo WLTL11094 Bedienungsanleitung

Weslo

Weslo Cadence 970 Bedienungsanleitung

Weslo

Weslo CADENCE 78E Bedienungsanleitung

Weslo

Weslo Cadence4.8 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung