Weslo Pro Crosswalk 7.8 Treadmill Bedienungsanleitung

Model No. WLTL37308.1

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete cus-

tomer satisfaction. f you have

questions, or if parts are missing,

DO NOT CONTACT THE STORE;

please contact Customer Care.

IMPORTANT: You must note the

product model number and ser-

ial number (see the drawing

above) before contacting us:

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.wesloservice.com

Serial Number

Decal

www.weslo.com

USER'S MANUAL

Write the serial number in the space

above for future reference.

TABLE OF CONTENTS

WARNNGDECALPLACEMENT ..............................................................2

MPORTANTPRECAUTONS .................................................................3

BEFOREYOUBEGN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATONANDADJUSTMENT ............................................................14

HOWTOFOLDANDMOVETHETREADMLL ..................................................20

TROUBLESHOOTNG ......................................................................22

EXERCSEGUDELNES ...................................................................25

PARTLST ...............................................................................26

EXPLODEDDRAWNG .....................................................................28

ORDERNGREPLACEMENTPARTS ..................................................BackCover

LMTEDWARRANTY...............................................................BackCover

This drawing shows the locations of the warning

decals. If a decal is missing or illegible, call the

telephone number on the front cover of this

manual and request a free replacement decal.

Apply the decal in the location shown. Note:

The decals may not be shown at actual size.

WARNING DECAL PLACEMENT

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over age 35 or persons with

pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 14),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 14. To purchase a surge suppressor, see

your local WESLO dealer or call the telephone

number on the front cover of this manual and

order part number 146148, or see your local

electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 22 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 16).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails or crosswalk arms while using the

treadmill.

18. The pulse sensor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The pulse sensor is intended only as an exer-

cise aid in determining heart rate trends in

general.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

19. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 20.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the frame is held securely in the

storage position.

23. Do not change the incline of the treadmill by

placing objects under the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never drop or insert any object into any

opening on the treadmill.

26. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

27. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO PRO™

CROSSWALK 7.8 treadmill. The CROSSWALK 7.8

treadmill offers a selection of features designed to make

your workouts at home more effective and enjoyable.

And when youʼre not exercising, the treadmill can be

folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

using the treadmill. f you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

To avoid a registration fee for any service needed

under warranty, you must register the treadmill at

www.wesloservice.com/registration.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Reset/Off

Circuit Breaker

Power Cord

Walking Belt

Hood

Wheel

Foot Rail

dler Roller

Adjustment Bolts

Accessory Tray

Fan

Crosswalk Arm

Pulse Sensor

Resistance Knob

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-

mance. f there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,

non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , scissors , needlenose pliers , and rubber mallet .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART L ST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

M10 Flat Washer

(14)–2

M8 x 15mm

Bolt (8)–6

M10 Star

Washer (9)–6

M8 Star

Washer (5)–6

M4.2 x 19mm

Screw (10)–4

M5 Star

Washer (7)–2

M10 x 75mm Bolt (2)–4

M10 x 60mm Patch Bolt (1)–2

M5 x 16mm

Screw (85)–2

M4 x 10mm Ground

Screw (84)–1

#10 x 1" Tek Screw

(112)–2

#8 x 1" Tek Screw

(26)–6

M8 Flat

Washer (32)–4

Base Extension Nut

(43)–4

M8 x 58mm Bolt (13)–4

1/4" Flat Washer

(114)–4

1/4" x 3" Bolt (111)–4

2. Have a second person hold the Base (52) in the

position shown.

dentify the Left Upright (53) (the Right Upright

[54] has a square hole near the lower end).

Hold the Left Upright (53) so the two round

holes are on top as shown. Attach the Left

Upright to the Base (52) with two M10 x 75mm

Bolts (2) and two M10 Star Washers (9). Do not

fully tighten the Bolts yet.

Attach the Right Upright (54) to the Base (52)

in the same way.

Square

Hole

Round Holes

1. Make sure that the power cord is unplugged.

Position the Base (52) and the Base Extensions

(45) upside-down as shown.

Attach six Base Feet (63) to the Base (52) and

the Base Extensions (45) with six #8 x 1" Tek

Screws (26).

52 26

26 63

4. Position the Base (52) as close to the front of the

treadmill as possible, as shown.

See the upper inset drawing. Locate the wire

tie in the lower end of the Right Upright (54). Tie

the wire tie securely around the end of the Wire

Harness (39). Then, locate the other end of the

wire tie in the upper end of the Right Upright.

Pull the upper end of the wire tie until the Wire

Harness is extending from the upper end of the

Right Upright. Secure the Wire Harness to the

Right Upright so that it will not fall inside.

See the lower inset drawing. Press the indi-

cated Grommet (49) into the Right Upright (54).

Wire Tie

3. Attach each Base Extension (45) to the Base

(52) with two M8 x 58mm Bolts (13), two M8 Flat

Washers (32), and two Base Extension Nuts

(43). Note: The heads of the Bolts should be

on the outside of the Base Extensions.

Lower the Base (52) so that it is flat on the floor.

13 43

Bolt Head

6. See the left inset drawing in step 5. dentify

the outer side of the remaining Frame Spacer

(11).

Hold the Frame Spacer (11) between the Left

Upright (53) and the Lift Frame (23), with the

outer side of the Frame Spacer facing the

Left Upright. Attach the Left Upright to the Lift

Frame with an M10 x 60mm Patch Bolt (1), an

M10 Flat Washer (14), and an M10 Star Washer

(9); do not fully tighten the Patch Bolt yet.

14 11

114

5. See the left inset drawing. dentify the two

Frame Spacers (11). Open the included packet

of grease, and apply grease to both sides of both

Frame Spacers. Then, identify the outer side of

each Frame Spacer.

Hold a Frame Spacer (11) between the Right

Upright (54) and the Lift Frame (23), with the

outer side of the Frame Spacer facing the

Right Upright.

With the help of a second person, lift the front of

the treadmill. Attach the Lift Frame (23) to the

Right Upright (54) with an M10 x 60mm Patch

Bolt (1), an M10 Flat Washer (14), and an M10

Star Washer (9); do not fully tighten the Patch

Bolt yet.

Grease

Outer Side

8. Remove the plastic ties from the Right Handrail (33)

and the Left Handrail (not shown). f necessary,

press the Cage Nuts (105) back into place. With the

help of a second person, hold the Console

Assembly (91) near the Right Upright (54).

Connect the Wire Harness (39) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. f they do not, turn one connector and try

again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY BE

DAMAGED WHEN THE POWER IS TURNED

ON. Next, insert the connectors and the excess

wire downward into the Right Upright (54). Then,

remove the wire tie from the Wire Harness.

Wire

Tie

105 Console

Wire

Console

Wire

7. Set the Console Assembly (91) face down on a

soft surface to avoid scratching the Console

Assembly. Hold the Right Handrail (33), which

has a large hole in one side, near the Console

Assembly.

Next, insert the console wire and the tie into the

large hole in the side of the Right Handrail (33).

Using needlenose pliers, pull the console wire

out of the hole near the bracket on the Right

Handrail.

Then, set the Right Handrail (33) on the Console

Assembly (91). Make sure that no wires are

pinched. Start an M5 x 16mm Screw (85) with

an M5 Star Washer (7) into the Right Handrail,

and then start two M4.2 x 19mm Screws (10)

into the Right Handrail. Tighten the M5 x 16mm

Screw and then tighten the two M4.2 x 19mm

Screws; do not overtighten the Screws.

Attach the Left Handrail (not shown) to the

Console Assembly (91) in the same way.

Note: There are no wires on the left side.

Console

Wire

Large

Hole

Bracket

Tie

Andere Handbücher für Pro Crosswalk 7.8 Treadmill

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence M6 Elliptical Einrichtungshandbuch

Weslo

Weslo Cadence 78e Treadmill Bedienungsanleitung

Weslo

Weslo CARDIO WALK Bedienungsanleitung

Weslo

Weslo Cadence 25 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 960 C00921-b Bedienungsanleitung

Weslo

Weslo Cadence 70 Treadmill Systemhandbuch

Weslo

Weslo Cadence 200 Bedienungsanleitung

Weslo

Weslo Cadence Sl 20 Bedienungsanleitung

Weslo

Weslo Cadence R 7.2 Treadmill Bedienungsanleitung

Weslo

Weslo CARDIO STRIDE 4.0 Bedienungsanleitung

Weslo

Weslo ENERGETICS TM1.5 Bedienungsanleitung

Weslo

Weslo WLTL39201 Bedienungsanleitung

Weslo

Weslo WLTL37308.0 Bedienungsanleitung

Weslo

Weslo Cadence 600 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL48410 Bedienungsanleitung

Weslo

Weslo CardioStride Plus Bedienungsanleitung

Weslo

Weslo Cadence S6 Treadmill Systemhandbuch

Weslo

Weslo Cadence 200 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence Ex 18 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 4.9 Ery Treadmill Bedienungsanleitung

Weslo

Weslo Cadence G25 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 5.0 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Bedienungs- und Wartungshandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung