Weslo WCTL19809.0 Bedienungsanleitung

USER'S MANUAL

Serial Number

Decal

Model No. WCTL19809.0

Serial No.

Write the serial number in the space

above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

If you have questions, or if parts

are damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT DI-

RECTLY.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 8:00 until 17:00 ET

(excluding holidays)

OR E-MAIL US:

customerservice@iconcanada.ca

www.weslo.com

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBEGIN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATIONANDADJUSTMENT ............................................................11

HOWTOFOLDANDMOVETHETREADMILL ..................................................16

TROUBLESHOOTING ......................................................................18

EXERCISEGUIDELINES ...................................................................20

PARTLIST ...............................................................................22

EXPLODEDDRAWING .....................................................................24

ORDERINGREPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY...............................................................BackCover

WESLO is a registered trademark of ICON IP, Inc.

WARNING DECAL PLACEMENT

The decal shown here has been applied in the loca-

tion shown. If the decal is missing or illegible, call

the telephone number on the front cover of this

manual and request a free replacement decal.

Apply the decal in the location shown. Note: The

decal may not be shown at actual size.

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or persons

with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should be used only by persons

weighing 250 lbs. (113 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page

11), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. To decrease the possibility of your treadmill

being damaged, always use a surge suppres-

sor with your treadmill. To purchase a surge

suppressor call the telephone number on the

front cover of this manual.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 18 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 13).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

19. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 16.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

22. Never insert any object into any opening on

the treadmill.

23. Inspect and properly tighten all parts of the

treadmill regularly.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning the

treadmill, and before performing the mainte-

nance and adjustment procedures described in

this manual. Never remove the motor hood un-

less instructed to do so by an authorized ser-

vice representative. Servicing other than the

procedures in this manual should be performed

by an authorized service representative only.

25. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

Thank you for selecting the new WESLO®CADENCE

25 treadmill. The CADENCE 25 treadmill combines ad-

vanced technology with innovative design to make

your workouts at home more effective and enjoyable.

And when youʼre not exercising, the CADENCE 25

treadmill can be folded up, requiring less than half the

floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

ey/Clip

Incline Leg/Pin

Walking Belt

Hood

Wheel

Foot Rail

Idler Roller

Adjustment Bolts

Water Bottle Holder*

Power Cord

Reset/Off

Circuit Breaker

*Water bottle is not included.

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant

on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , two

adjustable wrenches , and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses

shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-

tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic

parts, do not use power tools for assembly.

M10 x 110 Bolt (1)–2

M10 x 58mm Bolt (2)–4

M8 x 70mm Bolt (3)–4

M4.2 x 19mm

Screw (4)–4

M6 x 58mm Bolt (6)–4

M5 x 16mm

Screw (5)–2 M4.2 x 16mm

Screw (7)–6

M6 Washer

(11)–4

M8.5

Washer (13)–4

M10 Washer

(14)–6

M6 Nut (15)–4

M10 Nut (16)–4

M10 Star

Washer (9)–2

M8 Star

Washer (10)–4

M5 Star

Washer (12)–2

2. Slide the two Wheel Housings (62) onto the Base (52)

with the head of the M10 x 62mm Bolts (35) on the out-

side as shown. Attach each Wheel Housing with two M6 x

58mm Bolts (6), two M6 Washers (11), and two M6 Nuts

(15).

611

62 15

1. Have a second person hold the Base (52) in the position

shown.

Identify the Left Upright (53) (the Right Upright [54] has a

large hole near the lower end).

Hold the Left Upright (53) so the bend is in the posi-

tion shown. Insert two M10 x 58mm Bolts (2) into the

bracket on the Left Upright. Attach the Left Upright to

the Base (52) with the M10 x 58mm Bolts, two M10

Washers (14), and two M10 Nuts (16). Do not tighten

the Nuts yet.

Attach the Right Upright (54) to the Base (52) in the

same way.

54 16

216

Large

Hole

Bend

3. With the help of a second person, raise the Uprights

(53, 54) so the Base (52) is flat on the floor as shown.

Next, position the front of the treadmill Frame (51) be-

tween the Uprights.

See the inset drawing. Locate the wire inside of the

lower end of the Right Upright (54). Secure the wire to

the Wire Harness (98) using the included plastic tie.

Then, pull the upper end of the wire until the end of the

Wire Harness is extending from the indicated hole in the

upper end of the Right Upright.

Have a second person lift and hold the front end of the

Frame (51). Hold a Frame Spacer (23) between the Right

Upright (54) and the Frame. Attach the Right Upright and

the Frame Spacer to the Frame with an M10 x 110mm

Bolt (1), an M10 Washer (14), and an M10 Star Washer

(9).

Repeat this step on the left side of the treadmill. 9

Large

Hole

98 54

Tie

4. Turn the Console Assembly (91) face-down. Be careful

not to scratch the face of the Console Assembly.

Identify the Right Handrail (55), which has a large hole

in one side.

Attach the Right Handrail (55) to the Console Assembly

(91) with two M4.2 x 19mm Screws (4), an M5 x 16mm

Screw (5), and an M5 Star Washer (12).

Large Hole

Wire

6. Hold the Console Assembly (91) near the Right Upright

(54). Touch the Right Handrail to discharge any static.

Insert the end of the Wire Harness (98) into the hole in

the bottom of the Right Handrail (55) and out of the

large hole in the side. Next, Insert the end of the Wire

Harness through the two looped plastic ties.

Press the end of the Wire Harness (98) into the indi-

cated connector on the back of the Console Assembly

(91). See the inset drawing. The end of the Wire

Harness should slide easily into the connector and

snap into place. If it does not, turn the end of the Wire

Harness and try again. IF THE CONNECTOR IS NOT

INSERTED PROPERLY, THE CONSOLE MAY BE

DAMAGED WHEN THE POWER IS TURNED ON.

Plastic

Ties

Connector

5. Place the Left Handrail (56) on the Console Assembly

(91). Attach the Left Handrail to the Console Assembly

with two M4.2 x 19mm Screws (4), an M5 x 16mm

Screw (5), and an M5 Star Washer (12). 12

7. Insert the slack in the Wire Harness (98) down into the

Right Upright (54). Then, tighten the two plastic ties

around the Wire Harness, and cut off the ends of the

plastic ties.

98 Plastic

Ties

9. Carefully lower the Handrails (55, 56) to the floor. Center

the Frame (51) between the Handrails, and tighten the

four M10 x 58mm Bolts (2) (see step 1). Then, raise the

Handrails back to the vertical position.

See the inset drawing. Attach the Latch Assembly (102)

to the Left Upright (53) with two M4.2 x 16mm Screws

(7). Make sure that the Latch Assembly is oriented

as shown.

See HOW TO CHANGE THE INCLINE OF THE TREAD-

MILL on page 15. Adjust the incline of the treadmill as

desired.

10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. eep the included hex keys in a secure place; the large hex key is used to adjust the walking

belt (see page 19). To protect the floor or carpet, place a mat under the treadmill.

102

8. Set the Console Assembly (91) on the Right Upright (54)

and the Left Upright (not shown). Next, start four M8 x

70mm Bolts (3) with four M8.5 Washers (13) and four

M8 Star Washers (10) (only two of each are shown) into

the Right Upright and the Left Upright. Then, tighten all

four Bolts.

Insert the slack in the Wire Harness (98) down into the

Right Upright (54).

Attach the Console Back (93) to the Console Assembly

(91) with four M4.2 x 16mm Screws (7). Make sure that

the Wire Harness (98) is in the indicated slot in the

Console Back and that no wires are pinched.

Slot

55, 56

51 2

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence 715 Bedienungsanleitung

Weslo

Weslo WCTL39320 Bedienungsanleitung

Weslo

Weslo Cadence 50 Ls Benutzerhandbuch

Weslo

Weslo Cadence M6 Elliptical null

Weslo

Weslo Cadence Ls10 Bedienungsanleitung

Weslo

Weslo WLTL19010 Bedienungsanleitung

Weslo

Weslo Cadence 800 Treadmill Systemhandbuch

Weslo

Weslo CADENCE DX3 Bedienungsanleitung

Weslo

Weslo Cadence 400 Treadmill Kurzanleitung

Weslo

Weslo Aerobicstride 2.0 Treadmill Bedienungsanleitung

Weslo

Weslo CardioStrite Plus WETL01540 Bedienungsanleitung

Weslo

Weslo Cadence G 5.9 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence4.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence M6 Elliptical Systemhandbuch

Weslo

Weslo compact SL Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 1020 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL11093 Bedienungsanleitung

Weslo

Weslo Cadence 820 Bedienungsanleitung

Weslo

Weslo Cadence 720 Bedienungsanleitung

Weslo

Weslo Cadence 1015 Bedienungsanleitung

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL62790 Bedienungsanleitung

Weslo

Weslo Cadence 875 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung