Windsor Titan T1 Bedienungsanleitung

T1 98648 03/27/00

WET/DRY VACUUM

Operating Instructions (ENG)

MODEL: T1

Read these instructions before operating the machine.

QUEST…

for Continuous Improvement

Windsor’s Quality Management System is Certified ISO 9001.

TABLE OF CONTENTS

T1 98648 03/28/00

Data Log/Table of Contents...............1

Safety Instructions.............................2

Hazard Intensity Level.......................3

Grounding Instructions………………4

Operations .........................................5

Troubleshooting.................................6

Wiring Diagram..................................7

Machine Assembly ............................8

Parts Lists ..........................................9

Warranty............................................10

INSPECTION

Carefully unpack and inspect your machine for shipping damage. Each unit is operated and thoroughly inspected

before shipping, and any damage is the responsibility of the carrier, who should be notified immediately.

MODEL

DATE OF PURCHASE

SERIAL NUMBER

SALES REPRESENTATIVE #

DEALER NAME

T1 98648 03/27/00

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return

it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine is not suitable for picking up hazardous dust.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

When leaving unattended, secure against unintentional movement.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, switch off or lock the main power switch to prevent unauthorized use.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

WARNING:

HAZARD INTENSITY LEVEL

T1 98648 03/27/00 3

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper

operating condition. Following is information that signals some potentially dangerous conditions to the

operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate

all safety devices on the machine. Please take the necessary steps to train the machine operating

personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the

machine. Use Windsor approved replacement parts.

WARNING

!CAUTION

GROUNDING INSTRUCTIONS

T1 98648 03/27/00

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine operates on a standard 15 amp

115V, 60 hz, A.C. power circuit . The amp, hertz, and

voltage are listed on the data label found on each machine.

Using voltages above or below those indicated on the data

label will cause serious damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at least

one size larger than the power cord on the machine, and

must be limited to 50 feet (15.5m) in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction

or break down, grounding provides a path of least

resistance for electric current to reduce the risk of electric

shock. This appliance is equipped with a cord having an

equipment-grounding conductor and grounding plug. The

plug must be inserted into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and

has a grounded plug that looks like the plug in “Fig. A”. A

temporary adaptor that looks like theadaptor in “Fig . C”

may be used to connect this plug to a 2-pole receptacle as

shown in “Fig. B”, if a properly grounded outlet is not

available. The temporary adaptor should be used

only until a properly grounded outlet (Fig. A) can

be installed by a qualified electrician. The green

colored rigid ear, lug, or the like extending from

the adaptor must be connected to a permanent

ground such as a properly grounded outlet box

cover. Whenever the adaptor is used, it must be

held in place by a metal screw.

Improper connection of the equipment-grounding con-

ductor can result in a risk of electric shock. Check

with a qualified electrician or service person if you are

in doubt as to whether the outlet is properly grounded.

Do not modify the plug provided with the appliance - if

it will not fit the outlet, have a proper outlet installed by

a qualified electrician.

PROPER GROUNDING

NOTE: In Canada, the use of a temporaryadaptor is not

permitted by the Canadian Electrical Code

Grounded

Outlet

Grounding Pin

Fig. A

! WARNING

Metal Screw

Adaptor

Grounded Outlet

Box

Fig. B

Fig. C

Tab For Grounding Screw

Adaptor

OPERATING INSTRUCTIONS AND ACCESSORIES

T1 98648 03/27/00 5

Dry Pick Up

Dry Filter must be used during all dry pick up jobs to protect

vacuum motor(s) against dirt and debris. Routine cleaning

of filter will increase life of machine. Use of supplemental

paper filters will greatly reduce time spent cleaning Dry

Filter.

Wet Pick Up

Remove Dry Filter. Thoroughly empty dirt and debris from

tank. Securely fasten top on tank with latches. Machine is

ready for wet pick up using hose, extension wand(s) and/or

wet tools.

Hose Connection

Insert large end of hose into inlet on side of tank. Hose will

automatically lock in place. To release, press button on top

of inlet and remove hose.

Dry Pick Up Floor Tool

Use for dry pick up. Best when used on hard floors. Twist

floor tool clockwise onto extension wand until snug.

Wet Pick Up Floor Tool

For use on wet surfaces. Twist clockwise onto extension

wanduntil snug.

Extension Wands

The two extension wands can be used individually or fitted

together for “stand-up” floor cleaning. Slip one wand inside

other as far as it will go and twist together until indentations

on sides of wands line up.

Large Crevice Tool

Use for wet or dry pick up. For best fit, twist snugly onto

extension wand or hose.

Hose Adapter

For wet or dry use. Your machine is equipped with a 1.5”

diameter hose. HoseAdaptor enables machine to use

1.25” tools. Dusting tool included with machine must be

used with Hose Adapter,

Dusting Tool

For dusting dry surfaces. Twist onto HoseAdaptor or

Extension Wand(s).

AUTOMATIC SHUT OFF

Automatic shut off functions when tank has been filled with

liquid. As tank fills, float rises until it covers lower motor

filter. This shuts off vacuum suction when machine is full.

To continue use, turn off power switch and unplug power

cord. Remove top and empty tank.

TROUBLESHOOTING

T1 98648 03/27/00

TROUBLESHOOTING GUIDE

NOTE: Remember to disconnect the power source.

This guide can be used to find the reason for malfunctions that can occur.

PROBLEM REASON

Motor Does Not Run Not plugged in.

Fuse or circuit breaker blown.

Worn plug, connection loose inside plug.

Wire break in electrical cord.

Motor brushes worn.

Defective switch or motor.

Weak Vacuum Power Obstructions in tool, wand or hose, such as lint

or paper clips caught sideways in hose: foam

(wet pick up only).

Dirty filter bag.

Plugged deflector inside tank at air inlet.

Cracks or air leaks in hose, loose cuffs at

connections.

Air leak between head and tank, clamps not

tight, tank rim deformed or head seal defective.

No Vacuum Air Flow Hose, wand or tool plugged.

Float in raised position. Obstruction inside

head or on motor.

Float Shuts Off Without Water in Tank Filter bag pushed into float cage, holding too

loose to motor.

Parts damaged, missing or incorrectly

assembled, holding float too close to motor.

WIRING DIAGRAM

T1 98648 03/27/00 7

MACHINE ASSEMBLY

T1 98648 03/27/00

20 23

MACHINE ASSEMBLY PARTS LIST

T1 98648 03/27/00 9

REF PART NO. QTY DESCRIPTION SERIAL NO.

FROM NOTES:

19560002 22 Screw

29510531 1Switch, Power 115V

39550021 1Plug

49560048 1Handle, Motor Housing

59560007 1Cover, Upper Motor

69560010 3Screw, Power Cord Support

79540506 1Support, Power Cord

89560049 1Housing, Motor

99560051 1Insulation, Vacuum Motor Top

10 9560022 1Support, Vacuum Motor

11 9595006 1Insulation, Vacuum Motor Bottom

12 9595007 1Gasket, Upper Vacuum Motor

13 9560037 1Gasket, Lower Vacuum Motor

14 9527003 1Motor, Vacuum

15 9560027 1Cover, Tank

16 9560028 1Gasket, Tank Cover

17 9527014 1Float

18 9558023 1Cage, Float

19 9527002 1Tank

20 9560017 1Gasket, Hose Coupler

21 9560043 1Coupler, Hose

22 9560021 4Caster

23 95PL061 2Latch

24 9560041 1Power Cord, Complete

25 9595018 1Filter, Sponge

26 95R003 1Carbon Brushes for 9527003 Not shown

27 500015 1Label, Main

Inhaltsverzeichnis

Andere Windsor Staubsauger Handbücher

Windsor

Windsor VAC PAC VP Bedienungsanleitung

Windsor

Windsor 1.012-052.0 VSP14 Bedienungsanleitung

Windsor

Windsor Sensor XP 18 Bedienungsanleitung

Windsor

Windsor Carpet Maintainer IM 10066360 Bedienungsanleitung

Windsor

Windsor 1.014-013.0 Bedienungsanleitung

Windsor

Windsor Sensor SRS12 Bedienungsanleitung

Windsor

Windsor Versamatic VSE I-3 Bedienungsanleitung

Windsor

Windsor NORTHWIND NWB 86284220 Bedienungsanleitung

Windsor

Windsor SENSOR S12 Bedienungsanleitung

Windsor

Windsor TITAN 98165 Bedienungsanleitung

Windsor

Windsor VersamaticVS14 Bedienungsanleitung

Windsor

Windsor WAV IFB Bedienungsanleitung

Windsor

Windsor Sensor XP 15 10120290 Bedienungsanleitung

Windsor

Windsor versamatic 14 Bedienungsanleitung

Windsor

Windsor Sensor SRXP18 Bedienungsanleitung

Windsor

Windsor Radius Mini Bedienungsanleitung

Windsor

Windsor NuWave NWIFE 10125340 Bedienungsanleitung

Windsor

Windsor SENSOR XP15 240V AUSTRALIA Bedienungsanleitung

Windsor

Windsor VWB Technische Daten

Windsor

Windsor SENSOR S12 Bedienungsanleitung

Windsor

Windsor VS 14 Bedienungsanleitung

Windsor

Windsor Chariot iVac 34 ATV Handbuch

Windsor

Windsor PRS2 Bedienungsanleitung

Windsor

Windsor IMX Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch