ACME FLANDINA 22 IP Bedienungsanleitung

CONTENTS

1. Safety Instructions ......................................................................................... 2

2. Technical Specifications ................................................................................. 4

3. Control Panel ................................................................................................. 6

4. Fixture Installation ......................................................................................... 7

5. How To Set The Unit..................................................................................... 10

5.1 Main Function........................................................................................ 10

5.2 Home Position Adjustment .................................................................... 16

6. Control By Universal DMX Controller ........................................................... 20

6.1 DMX512 Connection .............................................................................. 20

6.2 Address Setting ...................................................................................... 21

6.3 DMX512 Configuration........................................................................... 21

7. Error Information......................................................................................... 40

8. Troubleshooting........................................................................................... 41

9. Fixture Cleaning ........................................................................................... 41

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Unpack and check carefully to ensure that there is no transportation damage before using the

unit.

This product is suitable for wet locations. Do not immerse in water.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.

Before operation, ensure that you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification label.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃.Do not

operate this product at a lower or higher temperature.

DO NOT connect the device to any dimmer pack.

Keep flammable materials away from the fixture while operating to avoid fire hazard.

Make sure the power cord is not crimped or damaged; replace it immediately if damaged.

Unit’s surface temperature may reach up to 65℃. DO NOT touch the housing bare-handed

during its operation.

Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut off

the mains power immediately.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid entanglement of the power cord with other wires.

The minimum distance to objects/surface must be more than 0.5 meters.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the housing as there are no user serviceable parts inside.

DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any repairs

yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center if needed.

Disconnect this product from its power source before servicing.

DO use the original packaging if the device is to be transported.

Avoid direct eye exposure to the light source while the product is on.

DO NOT operate this product if you see damage on the housing, shields, or cables. Have the

damaged parts replaced by an authorized technician at once.

2. Technical Specifications

Power Voltage:

100-240V~ 50/60Hz

Power Consumption:

300W

Light Source:

12x10W RGBWA LED

108x3W CW LED

Beam Angle (50%):

RGBWA: 30°

CW: 116°

Field Angle (10%):

RGBWA: 56°

CW: 160°

Control:

DMX Channel: 75/72/16/15/10/8/7/6 Channel

Control Mode: DMX512, RDM

Firmware Upgrade via DMX link

Construction:

Display: OLED display

Data In/Out: 5-pin IP XLR (3-pin IP XLR cable is optional)

Power In/Out: Waterproof Power Connector in/out

Protection Rating: IP66

Features:

12pcs LED pixel control

0-100% smooth dimming

Outstanding strobe effect with variable speed

Double mounting brackets with adjustable angle of 180°

2 x fixed clamps for 50mm truss

Dimension/Weight:

998x92x185mm, 7kgs

39.3"x3.6"x7.3"in, 15.4lbs

Photometric Diagram:

3. Control Panel

1. Display: To show the various menus and the selected function

2. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. POWER IN: To connect to supply power

4. DMX IN:

For DMX512 link, use 5-pin XLR cable to link the unit and DMX controller (3-pin XLR cable is

optional)

5. DMX OUT:

For DMX512 link, use 5-pin XLR cable to link the next units (3-pin XLR cable is optional)

6. POWER OUT: To connect to the next fixture

7. LOCK CATCH: Used for splicing other fixtures

4. Fixture Installation

DO install and operate by qualified operator. Fixture(s) should be installed in areas outside walking

paths, seating areas, or away from areas were unauthorized personnel might reach the fixture by

hand. NEVER stand directly below the fixture(s) when rigging, removing or servicing.

Always ensure that the unit is firmly fixed to avoid vibration and slipping off during operation.

Ensure that the trussing or area of installation must be able to hold 10 times the weight without any

deformation. Always attach a safety cable that can hold at least 12 times the weight of the fixture

whenever installing this fixture in a suspended environment to ensure that the fixture will not fall if

the clamp fails.

This fixture is fully operational in three different mounting positions: hanging upside-down,

mounted sideways on trussing, or fix on a flat level surface (such as the ground or a wall). Always

use and install the supplied safety cable as a safety measure to prevent accidental damage and/or

injury in the event the clamp fails.

The fixture can be spliced by the lock catch. First, set the lock catch on the fixture to the “UNLOCK”

position, then align it with another fixture (the end with a slot), and finally set the lock catch to the

“LOCK”position and lock it into the slot.

Fix the fixture on a flat level surface (such as the ground or a wall):

1. Drill four expansion screw holes (for M12 expansion screws) on a flat level surface (such as the

ground or a wall) according to the size shown in Figure ①.

2. As shown in Figure ②, unscrew the washers and nuts of the expansion screws, and insert the

expansion screw tubes and screws into the drilled screw holes.

3. As shown in Figure ③, align the holes on the brackets of the fixture with the four screws, then

put the washers and nuts of the expansion screws in turn and tighten them with a wrench.

4. After tightening the nuts, check whether the fixture is installed firmly, then adjust the fixture to

the required angle through the bracket knob.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME GEIST BSWF Bedienungsanleitung

ACME

ACME Splendor 220 II Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

ACME

ACME Spartan Hybrid Bedienungsanleitung

ACME

ACME CP-18TC Bedienungsanleitung

ACME

ACME Energy Spot PRO Bedienungsanleitung

ACME

ACME GLAMOUR 700Z RGBY Bedienungsanleitung

ACME

ACME BF-1500ND B Bedienungsanleitung

ACME

ACME Building wash Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME COMET Bedienungsanleitung

ACME

ACME XP-5000WZ Bedienungsanleitung

ACME

ACME SAMURAI SCAN 50 Bedienungsanleitung

ACME

ACME Thunderstruck LP-2304 Bedienungsanleitung

ACME

ACME Gemini Bedienungsanleitung

ACME

ACME CHIRON Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung

ACME

ACME Dragon Scan 50 LED-SC50B Bedienungsanleitung

ACME

ACME COOLIE 14FC Bedienungsanleitung

ACME

ACME FLASHDOT Bedienungsanleitung

ACME

ACME Building wash Bedienungsanleitung

ACME

ACME LED-0408 Bedienungsanleitung

ACME

ACME LP-1600 BD30 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung