Advantech MIC-3723 Bedienungsanleitung

MIC-3723/3723R

16-bit, 8-ch Non-isolated

Analog Output CompactPCI

Card / Rear I/O support

User Manual

MIC-3723/3723R User Manual ii

The documentation and the software included with this product are copy-

righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003372310 2nd Edition

Printed in Taiwan March 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

MIC-3723/3723R User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. Please contact your supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (OS, version, software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are

included and in good condition. If any item does not accord with the

table, please contact your dealer immediately.

• CompactPCI Communication Interface Card

• Rear I/O Module (for MIC-3723R only)

• 1 x Companion CD-ROM (DLL driver included)

• 1 x User Manual (this manual)

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................. 2

1.2 Applications ...................................................................... 3

1.3 Installation Guide .............................................................. 4

Figure 1.1:Installation flow chart ................................... 5

1.4 Software Overview............................................................ 6

1.5 Device Drivers Programming............................................ 7

1.6 Accessories........................................................................ 9

Chapter 2 Installation ..................................................... 12

2.1 Unpacking ....................................................................... 12

2.2 Driver Installation ........................................................... 13

2.3 Hardware Installation ...................................................... 17

Figure 2.1:Device Name Listed on Device Manager .. 18

2.4 Device Setup & Configuration........................................ 19

2.4.1 Setting up the Device ................................................... 19

Figure 2.2: Device Manager Dialog Box ..................... 20

2.4.2 Configuring the Device ................................................ 20

Figure 2.3:Device Setting Dialog Box ......................... 21

Chapter 3 Signal Connections ........................................ 24

3.1 Overview ......................................................................... 24

3.2 Switch & Jumper Settings............................................... 24

Figure 3.1:MIC-3723 Connectors, Jumpers & Switch 24

Figure 3.2:MIC-3723R Connectors, Jumpers&Switch 25

Figure 3.3:MIC-3723R Rear I/O Connectors .............. 25

3.2.1 Jumper Settings ............................................................ 26

Table 3.1:Jumper Settings ............................................ 26

3.2.2 Setting the Analog Output Mode After Reset .............. 26

3.2.3 BoardID Switch Settings ............................................. 27

3.3 Signal Connections.......................................................... 28

3.3.1 Pin Assignments .......................................................... 28

Figure 3.4:I/O Connector Pin Assignments ................. 28

3.3.2 I/O Connector Signal Descriptions .............................. 29

Table 3.2: I/O Connector Signal Description .............. 29

3.3.3 Analog Output Connection .......................................... 30

Figure 3.5:Floating-load Connections ......................... 30

Figure 3.6:Grounded-load Connections ....................... 30

Figure 3.7:Differential-load w/Ground Connections ... 31

Figure 3.8:Grounded-load w/Floating Power .............. 31

Figure 3.9:Floating-load w/Grounded Power .............. 32

Figure 3.10:Floating-load w/Internal +12 VDC ......... 32

Figure 3.11:Current Sink Circuitry .............................. 32

3.4 Field Wiring Considerations ........................................... 34

MIC-3723/3723R User Manual vi

Appendix A Specifications ................................................. 36

A.1 Analog Output ................................................................. 36

A.2 Digital Input /Output ....................................................... 36

A.3 General ............................................................................ 37

Appendix B Block Diagram............................................... 40

CHAPTER

Introduction

This chapter gives background infor-

mation on the MIC-3723/3723R and

shows how to configure the card to

match your application and prepare it

for installation on your system.

Sections include:

• Features

• Applications

• Installations Guide

• Software Overview

• Device Drivers Programming

• Accessories

MIC-3723/3723R User Manual 2

Chapter 1 Introduction

Thank you for buying the Advantech MIC-3723/3723R. MIC-3723/

3723R is a non-isolated analog output card for CompactPCI systems.

Each analog output channel is equipped with a 16-bit, double-buffered

DAC. It also features auto-calibration function and a BoardID switch.

MIC-3723/3723R is an ideal solution for industrial applications where

multiple analog output channels are required.

The following sections of this chapter will provide further information

about features of the multifunction cards, a Quick Start for installation,

together with some brief information on software and accessories for the

MIC-3723/3723R card.

1.1 Features

• Auto calibration function

• Each analog output channel is equipped with a 16-bit DAC

• Flexible output range: ±10V, 0~20 mA, 4~20 mA

• Synchronized output function

• Output values retained after system hot reset

• 2-port (16-channel) user-defined digital input/output

• BoardID switch

• Rear I/O Module (for MIC-3723R only)

MIC-3723/3723R offers the following main features:

Auto-calibration Function

MIC-3723/3723R provides an auto-calibration function by using a cali-

bration utility. The built-in calibration circuitry of MIC-3723/3723R cor-

rects gain and offset errors in analog output channels, thereby eliminating

the need for external equipment and user adjustments.

3 Chapter1

Flexible Voltage Output Range

MIC-3723/3723R provides a fixed voltage output range at ±10V to fulfill

the flexible range needed for various applications. You can define a spe-

cific voltage output range and output the data format via the enclosed

software utility and driver.

Keep Output Values after System Reset

You can independently set the eight outputs to different ranges: ±10V,

0~20mA or 4~20mA, and all the ranges are software selectable. When the

system is hot reset (power not shut off), MIC-3723/3723R can either

retain the last analog output values, or return to its default configuration,

depending on jumper settings. This practical function eliminates danger

caused by operation errors after unexpected system resets.

BoardID Switch

MIC-3723/3723R has a built-in DIP Switch that helps define each card’s

unique identifier when multiple MIC-3723/3723R cards have been

installed in the same PC chassis. The BoardID switch setting function is

very useful when you build a system with multiple MIC-3723/3723R

cards. With correct BoardID settings, you can easily identify and access

each card during hardware configuration and software programming.

1.2 Applications

• Process control

• Programmable voltage sources

• Programmable current sink

• Servo control

• Multiple loop PID control

Note: For detailed specifications of the MIC-3723/

3723R, please refer to Appendix A, Specifica-

tions.

MIC-3723/3723R User Manual 4

1.3 Installation Guide

Before you install your MIC-3723/3723R card, please make sure you

have the following necessary components:

• MIC-3723/3723R DA&C card

• MIC-3723/3723R User Manual

• Advantech DLL drivers (included in the companion CD-ROM)

• Wiring cable PCL-10168 (optional)

• Wiring board ADAM-3968 (optional)

• CompactPCI enclosure with a CompactPCI bus slot (Win 2000/XP)

After you get the necessary components and maybe some of the accesso-

ries for enhanced operation of your MIC-3723/3723R multifunction card,

you can then begin the installation procedures. Figure 1.1 on the next

page provides a concise flow chart to give a broad picture of the software

and hardware installation procedures:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech PCI-Karte Handbücher

Advantech

Advantech B+B SmartWorx McPC/Giga-MediaLinX Bedienungsanleitung

Advantech

Advantech UNO-P166 Installations- und Betriebshandbuch

Advantech

Advantech PCI-COMM Series Bedienungsanleitung

Advantech

Advantech PCI-1680U Bedienungsanleitung

Advantech

Advantech PCI-1710 Bedienungsanleitung

Advantech

Advantech PCI-1752U Bedienungsanleitung

Advantech

Advantech PCI-1757UP Bedienungsanleitung

Advantech

Advantech MIC-3612/3-BE Bedienungsanleitung

Advantech

Advantech PCI-1751U Bedienungsanleitung

Advantech

Advantech DVP-7014HE Bedienungsanleitung

Advantech

Advantech PCA-6184VE Bedienungsanleitung

Advantech

Advantech MIC-3716 Bedienungsanleitung

Advantech

Advantech PCI-1730 Bedienungsanleitung

Advantech

Advantech DVP-7010BE Bedienungsanleitung

Advantech

Advantech PCI-1751 Bedienungsanleitung

Advantech

Advantech ARK-5261 Installations- und Betriebshandbuch

Advantech

Advantech PCI-1625U Bedienungsanleitung

Advantech

Advantech PCI-1742U Bedienungsanleitung

Advantech

Advantech MIC-3451 Bedienungsanleitung

Advantech

Advantech PCI-1612B Betriebsanleitung

Advantech

Advantech DSPC-8661-PCXE Bedienungsanleitung

Advantech

Advantech PCI-1711U Series Bedienungsanleitung

Advantech

Advantech PCIE-1174 Bedienungsanleitung

Advantech

Advantech PCL-730 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung