Advantech PCI-1723 Bedienungsanleitung
PCI-1723
16-bit, 8-ch., Non-Isolated
Analog Output Card
User Manual
PCI-1723 User Manual ii
Copyright
The documentation and the software included with this product are copy-
righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech
Co., Ltd. reserves the right to make improvements in the products
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or
by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use,
nor for any infringements of the rights of third parties, which may result
from its use.
Acknowledgements
PC-LabCard is a trademark of Advantech Co., Ltd. IBM and PC are
trademarks of International Business Machines Corporation. MS-DOS,
Windows, Microsoft Visual C++ and Visual BASIC are trademarks of
Microsoft Corporation. Intel and Pentium are trademarks of Intel Corpo-
ration. Delphi and C++ Builder are trademarks of Inprise Corporation.
All other product names or trademarks are properties of their respective
owners.
Part No. 2003172300 Edition 1.1
Printed in Taiwan November 2006
iii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for two years
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test-
ing, most of our customers never need to use our repair service. If an
Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will
be billed according to the cost of replacement materials, service time and
freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
PCI-1723 User Manual iv
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring. We recommend the use
of shielded cables. This kind of cable is available from Advantech. Please
contact your local supplier for ordering information.
Technical Support and Assistance
Step 1. Visit the Advantech web site at www.advantech.com/support
where you can find the latest information about the product.
Step 2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional
assistance. Please have the following information ready before
you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, appli-
cation software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Packing List
Before setting up the system, check that the items listed below are
included and in good condition. If any item does not accord with the
table, please contact your dealer immediately.
Before you install your PCI-1723 card, please make sure you have the
following necessary components:
• PCI-1723 DA&C card
• PCI-1723 User’s Manual
• Advantech DLL drivers (Included in the companion CD-ROM)
• Wiring cable PCL-10168 (option)
• Wiring board ADAM-3968 (option)
• Personal computer or workstation with a PCI-bus slot (running Win-
dows 2000/95/ 98/NT/ME/XP)
v Table of Contents
Contents
Chapter 1 Introduction ..................................................... 2
1.1 Features ............................................................................ 2
1.2 Applications ..................................................................... 3
1.3 Installation Guide ............................................................. 4
Figure 1.1:Installation Flow Chart ................................. 5
1.4 Software Overview........................................................... 6
1.5 Device Driver Programming Roadmap ........................... 7
1.6 Accessories....................................................................... 9
Chapter 2 Installation ..................................................... 12
2.1 Unpacking ...................................................................... 12
2.2 Driver Installation .......................................................... 13
Figure 2.1:Advantech Automation Software Setup ..... 13
Figure 2.2:Options for Driver Setup ............................ 14
2.3 Hardware Installation ..................................................... 15
Figure 2.3:Device Name on Device Manager ............. 16
2.4 Device Setup and Configuration ................................... 17
2.4.1 Setting Up the Device .................................................. 17
Figure 2.4:Device Manager Dialog Box ...................... 17
Figure 2.5:“Device(s) Found” Dialog Box .................. 18
2.4.2 Configuring the Device ................................................ 18
Figure 2.6:Device Setting Dialog Box ......................... 18
Figure 2.7:Device Name on the List of Devices Box .. 19
Chapter 3 Signal Connections ........................................ 22
3.1 Overview ........................................................................ 22
3.2 Switch and Jumper Settings .......................................... 22
Figure 3.1:Card Connector, Jumper & Switches ......... 22
3.2.1 JP9 ................................................................................ 23
3.2.2 JP1~JP8 ........................................................................ 23
3.2.3 Setting the Time to Reset Analog Outputs .................. 23
3.2.4 Board ID setting ........................................................... 24
3.3 Signal Connections ........................................................ 25
3.3.1 Pin Assignment ............................................................ 25
Figure 3.2:I/O Connector Pin Assignments ................. 25
3.3.2 I/O Connector Signal Descriptions ................................ 26
Table 3.1:I/O Connector Signal Descriptions .............. 26
3.3.3 Analog Output Connection .......................................... 27
Figure 3.3:Analog Output Connections ....................... 27
3.4 Field Wiring Considerations .......................................... 28
Appendix A Specifications ................................................. 30
A.1 Analog Output .................................................................... 30
A.2 Digital Input /Output ...................................................... 30
A.3 General .......................................................................... 31
PCI-1723 User Manual vi
Appendix B Block Diagram............................................... 34
Appendix C Register Structure & Format....................... 36
C.1 Overview ........................................................................ 36
C.2 I/O Port Address Map ................................................... 36
Table C.1:PCI-1723 Register Format .......................... 37
C.3 D/A ch output data — BASE+00H~0EH ..................... 41
C.4 D/A ch latch data — BASE+00H~0EH......................... 42
C.5 Board ID — BASE+10H ............................................... 43
C.6 All D/A Ch Synchronized Settings — BASE+12H ....... 44
C.7 All D/A Ch Synchronized Status — BASE+12H .......... 44
C.8 DAC Range & Calibration Mode — BASE+14H ......... 45
C.9 DAC Range & Calibration Status — BASE+14H......... 46
C.10 SADC Control Command for Calibration Function—
BASE+16H 47
C.11 SADC Control Status for Calibration Function—
BASE+16H 48
C.12 Calibration Parameter Strobe — BASE+18H................ 48
C.13 Digital I/O setting — BASE+1AH ................................ 49
C.14 Digital I/O port mode — BASE+1AH........................... 50
C.15 Write Digital Output Command — BASE+1CH........... 50
C.16 Read Digital Input Data — BASE+1CH ....................... 51
C.17 Write Calibration Command — BASE+1EH ................ 51
C.18 Read calibration status — BASE+1EH.......................... 52
C.19 Synchronized Strobe — BASE+20H ............................. 53
C.20 Reset all D/A channels strobe — BASE+22H............... 53
C.21 Reset the calibration controller strobe — BASE+24H .. 54
C.22 Change D/A channels output type strobe — BASE+26H ..
54
C.23 Select the calibration Ref_V — BASE+28H ................. 55
C.24 Summary ........................................................................ 55
2
CHAPTER
1
Introduction
This chapter gives background infor-
mation on the PCI-1723.
Sections include:
• Features
• Applications
• Installation Guide
• Software Overview
• Device Driver Programming Road-
map
• Accessories
PCI-1723 User Manual 2
Chapter 1 Introduction
Thank you for buying the Advantech PCI-1723. The PCI-1723 is a non-
isolated multiple channels analog output card for PCI bus, and each ana-
log output channel is equipped with a 16-bit, double-buffered DAC. It
features an auto-calibration function and Board ID.
The PCI-1723 is an ideal solution for industrial applications where multi-
ple analog output channels are required.
The following sections of this chapter will provide further information
about features of the multifunction cards, a Quick Start for installation,
together with some brief information on software and accessories for the
PCI-1723 card.
1.1 Features
• Auto calibration function
• A 16-bit DAC is equipped for each of the analog output channels
• Flexible output range: ±10 V, 0 ~ 20 mA, 4 ~ 20 mA
• Synchronized output function
• Output values kept after system hot reset
• 2-port (16-channel) user-defined digital input/output
• Board ID
The Advantech PCI-1723 offers the following main features:
Auto-Calibration Function
The PCI-1723 provides an auto-calibration function by using a calibra-
tion utility. The built-in calibration circuitry of the PCI-1723 corrects gain
and offset errors in analog output channels, thereby eliminating the need
for external equipment and user adjustments.
3 Chapter1
Flexible Voltage Output Range
The PCI-1723 provides a fixed voltage output range of °”10 V to fulfill
your flexible range needed applications. Users can define the specific
voltage output range and output data format via the enclosed software
utility and driver.
Keeping Output Values After System Reset
Users can independently set the eight outputs to different ranges: °”10 V,
0 ~ 20 mA or 4 ~ 20 mA, and all ranges are software selectable. When the
system is hot reset (power not shut down), the PCI-1723 can either retain
the last analog output values, or return to its default configuration,
depending on the jumper setting. This practical function eliminates dan-
ger caused by improper operation during unexpected system reset.
Board ID
The PCI-1723 has a built-in DIP Switch that helps define each card’s ID
when multiple PCI-1723 cards have been installed on the same PC chas-
sis. The board ID setting function is very useful when users build their
system with multiple PCI-1723 cards. With correct Board ID settings,
you can easily identify and access each card during hardware configura-
tion and software programming.
1.2 Applications
• Process control
• Programmable voltage source
• Programmable current sink
• Servo control
• Multiple loop PID control
Note: For detailed specifications of the PCI-1723, please
refer to Appendix A, Specifications.
PCI-1723 User Manual 4
1.3 Installation Guide
Before you install your PCI-1723 card, please make sure you have the
following necessary components:
• PCI-1723 DA&C card
• PCI-1723 User’s Manual
• Advantech DLL drivers (Included in the companion CD-ROM)
• Wiring cable PCL-10168 (option)
• Wiring board ADAM-3968 (option)
• Personal computer or workstation with a PCI-bus slot (running Win-
dows 2000/95/ 98/NT/ME/XP)
Some other optional components are also available for enhanced opera-
tion such as application software ActiveDAQ, GeniDAQ and other third-
party software packages
After you get the necessary components and maybe some of the accesso-
ries for enhanced operation of your Multifunction card, you can then
begin the installation procedure. Figure 1-1 on the next page provides a
concise flow chart to give users a broad picture of the software and hard-
ware installation procedures:
Andere Handbücher für PCI-1723
2
Inhaltsverzeichnis
Andere Advantech PCI-Karte Handbücher
Advantech
Advantech PCIE-1744 Bedienungsanleitung
Advantech
Advantech DVP-7020BE Bedienungsanleitung
Advantech
Advantech MIC-3612/3-BE Bedienungsanleitung
Advantech
Advantech DSPC-8682 Bedienungsanleitung
Advantech
Advantech PCI-1761 Bedienungsanleitung
Advantech
Advantech PCI-1723 Bedienungsanleitung
Advantech
Advantech PCI-1711U Series Bedienungsanleitung
Advantech
Advantech MIC-3758DIO Bedienungsanleitung
Advantech
Advantech PCI-1601 Bedienungsanleitung
Advantech
Advantech PCI-1680U Bedienungsanleitung
Advantech
Advantech PCL-730 Bedienungsanleitung
Advantech
Advantech DVP-7637HE Bedienungsanleitung
Advantech
Advantech PCI-1730 Bedienungsanleitung
Advantech
Advantech DSPC-8661-PCXE Bedienungsanleitung
Advantech
Advantech PCI-1612B Betriebsanleitung
Advantech
Advantech PCI-1733 Installations- und Betriebshandbuch
Advantech
Advantech ECU-P1706 Installations- und Betriebshandbuch
Advantech
Advantech PCI-1730U Bedienungsanleitung
Advantech
Advantech PCIE-1758 Series Bedienungsanleitung
Advantech
Advantech PCI-1757UP Bedienungsanleitung
Beliebte PCI-Karte Handbücher anderer Marken
Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung
Micro Innovations
Micro Innovations USB650A Bedienungsanleitung
KTI Networks
KTI Networks KF-310 Bedienungsanleitung
Asus
Asus SpaceLink WL230 Bedienungsanleitung
SIIG
SIIG SC2475 Bedienungsanleitung
TRENDnet
TRENDnet TEW-703PI Bedienungsanleitung
Belkin
Belkin F5D7000F Bedienungsanleitung
Pericom
Pericom PI7C7100 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung
Digium
Digium TE200 Series Bedienungsanleitung
Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung
Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung