Advantech PCIE-1765 Bedienungsanleitung

User Manual

PCIE-1765

12-Channel Relay PCI Express

Card

PCIE-1765 User Manual ii

The documentation and the software included with this product are copyrighted 2018

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to improve the products described in this manual at any time without notice. No part

of this manual may be reproduced, copied, translated, or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd. The infor-

mation provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties that may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe that your product is defective, follow the steps outlined below.

1. Collect all information about the problem encountered (for example, CPU

speed, Advantech products used, other hardware and software used, etc.). Note

anything abnormal and list any onscreen messages received when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandize authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

Part No. 2001176510 Edition 1

Printed in Taiwan August 2018

iii PCIE-1765 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from damage by electrostatic discharge (ESD) and EMI

leakage, we strongly recommend the use of CE-compliant industrial enclosure prod-

ucts.

Technical Support and Assistance

1. Visit the Advantech website at www.advantech.com/support to obtain the latest

product information.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions, and Notes

Document Feedback

To assist us in making improvements to this manual, we welcome all comments and

constructive criticism. Please send all such feedback writing to support@advan-

tech.com

Warning! Warnings indicate conditions that, if not observed, can cause personal

injury!

Caution! Cautions are included to help avoid hardware damage and data losses.

For example,

“Batteries are at risk of exploding if incorrectly installed. Do not attempt

to recharge, force open, or heat the battery. Replace the battery only

with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer's instructions.

Note! Notes provide additional optional information.

PCIE-1765 User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all AC outlets before cleaning. Use only a damp

cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

the equipment fall may cause damage.

7. The openings of the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to a power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is unused for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following occurs, have the equipment checked by service person-

nel:

The power cord or plug is damaged.

Liquid has penetrated the equipment.

The equipment has been exposed to moisture.

The equipment is malfunctioning or does not operate according to the user

manual.

The equipment has been dropped and damaged.

The equipment shows obvious signs of breakage.

15. Do not leave this equipment in an environment where the storage temperature

fluctuates below -20 °C (-4 °F) or above 60 °C (140 °F) as this may cause dam-

age. The equipment should be stored in a controlled environment.

16. Batteries are at risk of exploding if incorrectly replaced. Replace only with the

same or equivalent types as recommended by the manufacturer. Discard used

batteries according to the manufacturer’s instructions.

17. In accordance with the IEC 704-1:1982 standards, the sound pressure level at

the operator’s position does not exceed 70 dB (A).

These instructions are provided according to IEC 704-1. Advantech disclaims all

responsibility for the accuracy of any statements contained herein.

v PCIE-1765 User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Key Features............................................................................................. 2

1.3 Applications............................................................................................... 2

1.4 Installation Guide ...................................................................................... 3

1.5 Software Overview .................................................................................... 3

1.6 Accessories............................................................................................... 4

Chapter 2 Installation............................................5

2.1 Unpacking ................................................................................................. 6

2.2 Switch and Jumper Settings...................................................................... 6

Figure 2.1 Card connector, jumper, and switch locations............ 6

Table 2.1: Summary of Jumper Settings ..................................... 6

Table 2.2: Board ID Settings (SW1) ............................................ 7

2.3 I/O Connectors .......................................................................................... 8

Figure 2.2 I/O connector pin assignments ................................... 8

2.4 Device Setup and Configuration ............................................................... 9

Chapter 3 Signal Connections ..........................11

3.1 Overview ................................................................................................. 12

3.2 Relay Connections .................................................................................. 12

Figure 3.1 Relay output connection ........................................... 12

Appendix A Specifications ....................................13

A.1 Relay Output ........................................................................................... 14

A.2 General Specifications ............................................................................ 14

Appendix B Block Diagram ...................................15

B.1 Block Diagram......................................................................................... 16

PCIE-1765 User Manual vi

Chapter 1

1Overview

PCIE-1765 User Manual 2

1.1 Introduction

Advantech’s PCIE-1765 is a 12-channel relay actuator card for PCIE bus. Built with

12 onboard SPDT relays, the PCIE-1765 card is ideal for applications such as device

ON/OFF control and power switching. Moreover, to ensure easy monitoring, each

relay is equipped with a red LED indicator to show its ON/OFF status.

The following sections of this chapter provide further information regarding the PCIE-

1765’s features, installation procedures, software, and accessories.

1.2 Key Features

12 form C-type relay output channels

LED indicators to show activated relays

Output status read back functionality

Retains relay output values after system hot reset

Board ID

Reset Protection Fulfills Requirements for Industrial Applications

When the system has undergone a hot reset (i.e., without turning off the system

power), the PCIE-1765 card can either retain the output values of each channel or

return to its default open configuration depending on its onboard jumper settings.

This function protects the system from malfunctioning during unexpected system

resets.

Plug-and-Play Functionality

The PCIE-1765 card is a plug-and-play device that fully complies with PCIE Specifi-

cations, Rev 2.0. During card installation, there is no need to set jumpers or DIP

switches. Instead, all bus-related settings, such as the base I/O address and interrupt

lines, are automatically configured with the plug-and-play function.

Board ID

The PCIE-1765 card features a built-in DIP switch that defines each card's ID when

multiple PCIE-1765 cards are installed on the same PC chassis. With correct Board

ID settings, users can easily identify and access each card during hardware configu-

ration and software programming.

1.3 Applications

Industrial On/Off control

SMT/PCB machinery

Semiconductor machinery

Education and research

External relay driving



3 PCIE-1765 User Manual

Chapter 1 Overview

1.4 Installation Guide

Before installing the PCIE-1765 card, please ensure that you have the following

items:

PCIE-1765 card

PCIE-1765 startup manual

Driver software - Advantech DAQNavi software (can be downloaded from the

product page)

Wiring cable - PCL-10137 (optional)

Wiring board - ADAM-3937 (optional)

PC or workstation with a PCI Express slot

Other optional components for enhanced operation (for example, Advantech

data acquisition tools, LabView, or other third-party software)

After obtaining the above items and optional accessories for enhanced operation,

you can begin installing the PCIE-1765 card.

1.5 Software Overview

Advantech offers a wide range of DLL drivers, application software, and third-party

driver support to assist you with fully exploiting the functions of the PCIE-1765 card.

DLL driver (Download from the product page)

LabVIEW driver

Advantech DAQNavi

Advantech’s application software, such as Advantech DLL Driver, can be used for

programming with DAQ cards. Advanced users also have another option for register-

level programming, although this option is not recommended because of it laborious

and time-consuming nature.

DLL Driver

Advantech’s DLL Driver software can be downloaded from the Advantech website

free of charge. All Advantech DAQ cards are equipped with this software. DLL Driver

also features a complete I/O function library for boosting application performance.

The DLL Driver software for Windows 7/8/10 functions seamlessly with diverse

development tools such as Visual C++, Visual Basic and Visual Studio.Net.

write code directly at the device register level. Because register-level programming

necessitates substantial time and effort, we recommend using Advantech’s DLL

Driver software instead.

PCIE-1765 User Manual 4

1.6 Accessories

Advantech offers a comprehensive range of accessories to support the PCIE-1765

card. These accessories include the following:

Wiring Cable

The PCL-10137 shielded cable is especially designed to provide high resistance to

noise for PCIE-1765 cards. To achieve superior signal quality, the signal wires are

twisted to form a “twisted-pair cable”, reducing cross-talk and noise from other signal

sources. Furthermore, the analog and digital lines are separately sheathed and

shielded to neutralize EMI/EMC problems.

Wiring Boards

The ADAM-3937 is a 37-pin D-type wiring terminal module for DIN-rail mounting.

This terminal module can be connected to Advantech PC-Lab cards and allow easy

and reliable access to individual pin connections for the PCIE-1765 card.



Inhaltsverzeichnis

Andere Advantech PCI-Karte Handbücher

Advantech

Advantech PCM-24R1TP-BE Installations- und Betriebshandbuch

Advantech

Advantech PCA-6194 Bedienungsanleitung

Advantech

Advantech PCIE-1753 Bedienungsanleitung

Advantech

Advantech PCI-1752 Bedienungsanleitung

Advantech

Advantech DVP-7637HE Bedienungsanleitung

Advantech

Advantech PCM-2312 Bedienungsanleitung

Advantech

Advantech PCI-1737U Installations- und Betriebshandbuch

Advantech

Advantech MIC-3756 Bedienungsanleitung

Advantech

Advantech PCIE-1824 Bedienungsanleitung

Advantech

Advantech PCI-1751 Bedienungsanleitung

Advantech

Advantech EKI-6340 Series Bedienungsanleitung

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech PCI-1721 Bedienungsanleitung

Advantech

Advantech PCA-6008G2 Bedienungsanleitung

Advantech

Advantech PCA-6184VE Bedienungsanleitung

Advantech

Advantech PCN-6351 Series Bedienungsanleitung

Advantech

Advantech PCI-1751U Bedienungsanleitung

Advantech

Advantech PCI-1710U-DE Bedienungsanleitung

Advantech

Advantech DVP-7636HE Bedienungsanleitung

Advantech

Advantech PCA-5610 Installations- und Betriebshandbuch

Advantech

Advantech PCLS-848-P Bedienungsanleitung

Advantech

Advantech PCI-1602UP Bedienungsanleitung

Advantech

Advantech MIC-5602 Bedienungsanleitung

Advantech

Advantech MIC-3401 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung