Assa Abloy Norton 1600 UniTrol Bedienungsanleitung

Non Hold Open (UL Listed)

Hold Open (H) (Not UL Listed)

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2533-020 Rev 2 02/20

1600 UniTrol®

Non Handed Door Closer

Standard Frame

Deep Reveal

Flush Transom

Sized

(Sizes 3,4)

UNI-1603BC (H)

UNI-1604BC (H)

Adjustable

(Sizes 1-6)

UNI-1601 (H)

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65warnings.ca.gov.

WARNING

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door: To Identify Your Model:

1-6 = 1601

3 = 1603BC

4 = 1604BC

Included Components (See page 2 for mounting hardware and optional components)

Standard Frame

(Reveals 1-7/8" to 4-5/8" - Uses 6190 Bracket)

Deep Reveal

(Reveals Over 4-5/8" - Uses 6191 Reinforcing Kit)

Flush Transom

(Uses 2022 Bracket)

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Arm Identication (Stamped on Arm)

Door Width Main Arm Non Hold

Open

Hold

Open

28" - 32"

(0.70 - 0.80m)

9-1/2"

(241mm) 6100-11 6100-1

33" - 41"

(0.85 - 1.00m)

11"

(279mm) 6100-13 6100-3

42" - 48"

(1.05 - 1.20m)

12-1/2"

(318mm) 6100-14 6100-4

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2533-020 Rev 2 02/20

• For special applications, a separate door and frame

preparation template is packed with these instructions. Use

this instruction sheet for installation sequence and closer

adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

• Door and frame must be properly reinforced.

Mounting Hardware Door or Frame Drill

Closer, Soft Plate:

1/4-14 x 1-1/2 Oval Flat Head Mach. Screw Wood 3/16" (4.76mm)

Closer, Soft Plate:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.10mm)

Tap 1/4-20

Closer:

Sleeve Nut and Bolt (SNB)

(optional)

Hollow Metal 9/32" (7.00mm) thru

3/8" (9.50mm) door face opposite to closer

Aluminum or Wood 3/8" (9.50mm) thru

Closer:

Thru Bolt and Grommet Nut (TBGN)

(optional)

All

9/32" (7.00mm) thru

3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,

door face opposite to closer

• Always consult door/frame manufacturer for fastener

compatibility.

• Adjust closing time speed between 4 and 7 seconds from

90° to 0°. Use of door by handicapped, elderly or small

children may require greater closing time.

• These door closers should NOT be installed on exposed side

(weather side) of exterior doors.

• Dimensions are given in inches (millimeters).

ATTENTION:

An incorrectly installed or improperly adjusted door closer can

cause property damage or personal injury. These installation

instructions should be followed to avoid the possibility of

misapplication or misadjustment.

1600 UniTrol Arm Closer

Brackets

Door Holder

Reinforcing Kit

2022

Option for Flush Transom

6190

Option for Standard Frame

1688C Drop Plate

For use with optional cover

1688 Drop Plate

For narrow top rail

Drop Plates

Cover

6191

Option for Deep Reveal

1600P

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2533-020 Rev 2 02/20 3

28" - 32" Wide Doors

Opening A B C

Hold Open Stop

85° 90° 10-1/2"

(267)

8-5/8"

(219)

9-5/8"

(244)

90° 95° 9-3/4"

(248)

(203)

(229)

95° 100° 9-1/4"

(235)

7-1/2"

(191)

8-1/2"

(216)

100° 105° 8-7/8"

(225)

7-1/8"

(181)

8-1/8"

(206)

105° 110° 8-1/2"

(216)

6-3/4"

(171)

7-3/4"

(197)

110° 115° 8-1/8"

(206)

6-3/8"

(162)

7-3/8"

(187)

23" - 41" Wide Doors

Opening A B C

Hold Open Stop

85° 90° 12-5/8"

(321)

11"

(279)

12"

(305)

90° 95° 12"

(305)

10-3/8"

(264)

11-3/8"

(289)

95° 100° 11-3/8"

(289)

9-3/4"

(248)

10-3/4"

(273)

100° 105° 10-7/8"

(276)

9-1/4"

(235)

10-1/4"

(260)

105° 110° 10-3/8"

(264)

8-3/4"

(222)

9-3/4"

(248)

110° 115° 10"

(254)

8-3/8"

(213)

9-3/8"

(238)

42" - 48" Wide Doors

Opening A B C

Hold Open Stop

85° 90° 15"

(381)

13-1/4"

(337)

14-1/4"

(362)

90° 95° 14-1/4"

(362)

12-1/2"

(318)

13-1/2"

(343)

95° 100° 13-5/8"

(346)

11-7/8"

(302)

12-7/8"

(327)

100° 105° 13"

(330)

11-1/4"

(286)

12-1/4"

(311)

105° 110° 12-1/2"

(318)

10-3/4"

(273)

11-3/4"

(298)

110° 115° 12"

(305)

10-1/4"

(260)

11-1/4"

(286)

1600 UniTrol Arm - Templates (Right Hand Shown)

Notes:

1. IMPORTANT: Door template is typical for all

installations. Frame template must be selected

according to frame reveal.

2. If top rail is as narrow as 2-5/8" (67mm) and

prevents closer from being mounted directly to

door surface, use 1688 Drop Plate. Prepare door

and frame accordingly.

1-7/8" - 4-5/8" Standard Frame Reveal (With Door Template)

Hinge

Pivot

3/4

(19.1)

1-3/4

(44)

2022 Bracket

(See Page 2)

1/2

(12.7)

2-1/2

(63.5)

1-1/2

(38.1)

C+ 1/8 (3.2)

Over 4-5/8" Deep Frame Reveal Template

Flush Transom Template

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2533-020 Rev 2 02/20

1600 UniTrol Arm Installation (Right Hand Shown)

2. Close latch and

sweep valves.

3. Install arm to frame.

5. Rotate closer pinion to align at as shown.

S and L valves

AWAY from hinge

1. Prepare door and frame.

1. Be sure that arm is correct for door width.

See “Components” on page 1.

2. Be sure that correct frame and door template

combination is used to prepare for installation.

See “Templates” on page 3.

3. Using dimensions for hold-open or door stop

angle desired, mark and drill

• Four (4) holes on door for closer (or drop

plate)

• Six (6) holes on frame for soft plate and 6190

bracket (See Figure 1) or

• Four (4) holes on frame for soft plate and

6191 reinforcing kit (See Figure 2) or

• Four (4) holes on frame for 2022 angle bracket

(See Figure 3)

4. UNI1601 ONLY: Set approximate closing power

using “Spring Power Adjustment” chart on page 5.

To ease optional cover

installation, insert cover

screws onto closer

(leaving a slight gap)

before mounting closer.

Figure 1. 1-7/8" - 4-5/8" Standard Frame With 6190 Bracket

Figure 2. Over 4-5/8" Deep Reveal With 6191 Reinforcing Kit

Figure 3. Flush Transom With 2022 Bracket

4. Mount drop plate (if used) and closer.

Standard Frame - 6190 Bracket Deep Reveal - 6191 Kit Flush Transom - 2022 Bracket

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2533-020 Rev 2 02/20 5

1600 UniTrol Arm Installation (Right Hand Shown)

6. Attach arm to closer. 7. Open latch and sweep valves.

Do not completely

open valves. Valves

will leak.

You’ve now installed the 1600 UniTrol Arm Closer.

🛑

Continue with closer adjustments and decorative cap or cover installation.

RH: Position at at R

LH: Position at at L

Closer Adjustments

Latch Backcheck

Use provided 1/8" hex wrench to

turn valves.

NEVER force valves out of closer.

NEVER completely close

backcheck valve. Backcheck

is not a positive stop.

Door must be open to adjust

spring closing power. Refer to

chart.

Do not use a power drill.

Warranty will be void. Sweep

Do not over tighten

cap or cover screws

Pinion Cap or Cover

Screw pinion cap onto pinion

shaft by hand or with a Phillips

screwdriver.

Slide cover over closer and secure

mounting screws after installation

is complete.

Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 80-9316-2533-020 Rev 2 02/20

Norton Technical Product Support:

Monroe, NC 28112 USA

Phone: 800.438.1951 ext: 6030

TechSupport.Norton@assaabloy.com

nortondoorcontrols.com

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED4000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5630 Series Kurzanleitung

Assa Abloy

Assa Abloy Norton 1600H Bedienungsanleitung

Assa Abloy

Assa Abloy RD3 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy Norton SafeZone 7100SZ Series Kurzanleitung

Assa Abloy

Assa Abloy MAB 609 + AC593 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7970DPS-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED159 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-FT Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1130-HU Series Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite EX88 Betriebsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED4000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Pull Side Series Kurzanleitung

Assa Abloy

Assa Abloy Adams Rite EX89 Betriebsanleitung

Assa Abloy

Assa Abloy Norton 5700 Series Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung