Avaya VSP 4000GSX Series Bedienungsanleitung

Release 4.0.50

NN46251-309

Issue 02.02

July 2015

Installation Job Aid for Avaya VSP 4000 4450GSX series

How to get help

To access the complete range of services and support that Avaya provides, go to www.avaya.com.

You can also go to www.avaya.com/support to access the following pages:

• technical documentation

• product training

• technical support

If you purchased a service contract for your Avaya product from a distributor or authorized reseller

and you need assistance, contact the technical support staff for that distributor or reseller.

Notices

Notice paragraphs alert you about issues that require your attention. The following paragraphs

describe the types of notices used in this guide.

Note:

Notes provide tips and useful information regarding the installation and operation of Avaya

products.

Electrostatic alert:

ESD

ESD notices provide information about how to avoid discharge of static electricity and

subsequent damage to Avaya products.

Caution:

Caution notices provide information about how to avoid possible service disruption or damage to

Avaya products.

Warning:

Warning notices provide information about how to avoid personal injury when working with

Avaya products.

Voltage:

Danger — High Voltage notices provide information about how to avoid a situation or condition

that can cause serious personal injury or death from high voltage or electric shock.

Danger:

Danger notices provide information about how to avoid a situation or condition that can cause

serious personal injury or death.

Safety messages

Warning:

Installation must be performed by qualified service personnel only. Read and follow all warning

notices and instructions marked on the product or included in the documentation.

Voltage:

This equipment relies on the building's installation for overcurrent protection. Ensure that a fuse

or circuit breaker no larger than 120 VAC, 15 A U.S. (240 VAC, 16 A International) is used on

the phase conductors.

Caution:

This device is a Class A product. In a domestic environment, this device can cause radio

interference, in which case the user may be required to take appropriate measures.

Caution:

When mounting this device in a rack, do not stack units directly on top of one another in the

rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting

brackets are not designed to support multiple units.

Voltage:

Use only power cords that have a grounding path. Without a proper ground, a person who

touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the

switch can result in excessive emissions.

Warning:

Disconnecting the power cord is the only way to turn off power to this device. Always connect

the power cord in a location that can be reached quickly and safely in case of an emergency.

Warning:

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into

an optical fiber or connector port. Always assume that fiber optic cables are connected to a light

source.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 2

Caution:

Risk of high current and board burn out if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

Warning:

The lithium battery is not field replaceable. It must only be removed and replaced by authorized

personnel. Contact Avaya Technical Support for assistance if the battery requires replacement.

Before you begin

Ensure the area where you install and use the VSP 4000 switch meets the following environmental

requirements:

• Ambient temperature between 32° and 122° F (0° and 50° C)

• Relative humidity between 0% and 95% noncondensing

• No nearby heat sources such as hot air vents or direct sunlight

• No nearby sources of severe electromagnetic noise

• No excessive dust

• Adequate power source within six feet; one 15-Amp circuit required for each power supply

• At least 2 inches (5.08 cm) on all sides of the switch unit for ventilation

• Adequate space at the front and rear of the switch for access to cables

If you are installing a single VSP 4000 switch on a table or shelf, ensure the surface can support at

least 15 to 20 pounds (7 to 9 kilograms).

Installing the Avaya VSP 4450GSX series switches

The VSP 4450GSX series consists of the 4450GSX-PWR+, 4450GSX-DC and the TAA compliant

versions.

Warning:

Do not use the ERS to VSP conversion kit (part number EC4810003-3.0) with these chassis .

The kit is incompatible with the VSP 4450GSX series switches.

Note:

A factory-supplied 4450GSX series switch has a USB slot but no USB device or cover.

Installing the Avaya VSP 4000 switch on a table or shelf

You can install a single Avaya VSP 4000 switch on any flat surface. The surface must support the

combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 3

To install an Avaya VSP 4000 on a table or shelf, perform this procedure.

1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.

2. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1

centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at

the back for power cord clearance.

Installing the Avaya VSP 4000 switch in an equipment rack

To install an Avaya VSP 4000 switch in an equipment rack, perform this procedure.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 4

Prerequisites for installing the Avaya Virtual Services Platform 4000 in an equipment rack:

• Ensure that you have a space of 1.75 inches (4.45 centimeters) in height for each switch in an

EIA or IEC-standard 19-inch (48.2-centimeter) equipment rack.

• The rack is bolted to the floor and braced if necessary.

• The rack is grounded to the same grounding electrode used by the power service in the area.

The ground path must be permanent and must not exceed 1 Ohm of resistance from the rack

to the grounding electrode.

1. Attach the L-bracket to each side of the switch using a #2 Phillips screwdriver as illustrated

below.

2. Slide the switch into the rack as illustrated.

3. Insert and tighten the rack-mount screws.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 5

Installing SFP transceivers

Install SFP transceivers by performing this procedure.

1. Remove the transceiver from the protective packaging.

2. Verify that the transceiver is the correct model for the network configuration.

3. Grasp the transceiver between your thumb and forefinger.

4. Insert the transceiver into the proper module on the switch. Apply a light pressure to the

transceiver until it clicks and locks into position in the module.

5. Remove the dust cover from the transceiver optical bores.

Removing SFP transceivers

Remove SFP transceivers by performing this procedure.

1. Disconnect the network fiber cable from the transceiver.

2. Use the locking mechanism on the transceiver to release it. The locking mechanism varies

from model to model as illustrated below.

3. Slide the transceiver from the module slot.

4. If the transceiver does not slide easily from the module slot, use a gentle side-to-side rocking

motion while firmly pulling the transceiver from the slot.

5. Attach a dust cover over the fiber-optic bores and store the transceiver in a safe place until

you need it.

Important:

Discard transceivers in accordance with the proper laws and regulations.

Power specifications for the Avaya VSP 4450GSX series switches

This section describes the regulatory AC and DC power specifications for the Avaya VSP 4000

4450GSX series switches.

The following table describes the regulatory AC power specifications for the VSP 4450GSX-PWR+

switch and its TAA compliant version. The regulatory AC power specifications are based on the

maximum rated capacity of the power supplies and are not based on typical power consumption,

which is lower.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 6

Table 1: AC power specifications

4450GSX-PWR+

Input Current: 12A/6A

Input Voltage (rms): 100 to 240VAC at 50 to 60 Hz

Power Consumption: 248 W maximum

Thermal Rating: 508 BTU/Hr maximum

Inrush Current: 70 A maximum

Turn on Condition: 1 second maximum after application of AC power

Important:

12 V output rise time, from 10 to 90 per cent, must be the maximum of 50 ms and monotonic under all

defined input and output conditions.

The following table describes the regulatory DC power specifications for the VSP 4450GSX-DC

switch. The regulatory DC power specifications are based on the maximum rated capacity of the

power supplies and are not based on typical power consumption, which is lower.

Table 2: DC power specifications

4450GSX DC

Input Current: 25A

Input Voltage: 12VDC

Power Consumption: • Typical: 116W

• Maximum: 164.6W

Thermal Rating: 508 BTU/Hr

Power supply power specifications for the VSP 4450GSX series switches

The Avaya VSP 4450GSX series switches support two external field replaceable AC and DC power

supplies. One power supply ships with the chassis. You can install a secondary power supply to

provide redundancy, load sharing, and to add Power over Ethernet Plus (PoE+) power budget on

PWR+ models.

AC power supply power specifications

The VSP 4000 4450GSX-PWR+, including the TAA compliant version, supports dual 54V 1000W

Power over Ethernet Plus (PoE+) AC power supplies.

Important:

Ensure that you use only 1000W power supplies (both primary and secondary) on VSP 4000

PWR+ models.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 7

Figure 1: 1000W AC power supply

Connector

The 1000W AC power supply uses an IEC 60320 C16 AC power cord connector. The AC power

cord is in close proximity to the hot air exhaust, and supports high operating temperatures.

Figure 2: IEC 60320 C16 connector

Power over Ethernet Plus (PoE+) specifications

Table 3: Avaya VSP 4450GSX-PWR+ PoE+ specifications

Maximum PoE+ W Average PoE+ W on 12 ports

835W with one power supply

1835W with two power supplies

17.8W or 32.4W (802.3.at) — 1 power supply

• The VSP 4450GSX-PWR+ can support 802.3af 17.8W or 32.4W on each port with one power

supply installed. You can add a second power supply for redundancy.

Related Links

Power supply power specifications for the VSP 4450GSX series switches on page 7

Installing the Avaya Virtual Services Platform 4000 power supply

You must install at least one power supply before using the switch. Avaya VSP 4000 models

support two field replaceable external power supplies. If supported, you can install an optional

second power supply for redundancy, load sharing, or to provide additional PoE+ power budget.

Perform the following procedure to install an external power supply into your switch.

Note:

Avaya VSP 4000 hardware can vary. This procedure only applies to hardware models with field

replaceable power supplies.

1. If a blanking plate covers the required power supply slot, remove the blanking plate before

attempting to insert the power supply.

2. Insert each power supply into a rear power supply slot.

3. Verify that each power supply is fully seated in the slot. Secure the power supply with the

two thumb screws.

Note:

The switch chassis can prevent an incorrect installation of a power supply. If you insert a

power supply upside down, it will not fully insert and the thumb screws will not engage.

4. Once you install a power supply, you can proceed with connecting AC power.

Note:

Do not connect an AC and DC power supply in the same chassis. Load sharing may be

affected.

Important:

You can hot swap power supplies while the switch is operational. One power supply is required

for continued switch operation. PoE+ load reductions can occur if you remove one power supply

while the switch is operating with dual power supplies.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 9

Connecting to AC power

To connect AC power to the switch, you need an appropriate AC power cord as described in the

following table, also see the following table for plug specifications.

Table 5: International power cord specifications

Country and Plug Specification Specifications Typical Plug

Continental Europe:

• CEE7 standard VII male plug

• Harmonized cord (HAR marking on the outside of the cord

jacket to comply with the CENELEC Harmonized

Document HD-21)

• 220 or 230VAC

• 50 Hz

• Single phase

United States of America, Canada, and Japan:

• NEMA5-15P male plug

• UL-recognized (UL stamped on cord jacket)

• CSA-certified (CSA label secured to the cord)

• 100 or 120VAC

• 50–60 Hz

• Single phase

United Kingdom:

• BS1363 male plug with fuse

• Harmonized cord

• 240VAC

• 50 Hz

• Single phase

Australia:

• AS3112-1981 male plug

• 240VAC

• 50 Hz

• Single phase

Danger:

Using power cords with a proper grounding path

Use only power cords that have a grounding path. Without a proper ground, a person who

touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the

switch can result in excessive emissions.

Connecting to DC power

To connect DC power to the switch, use the short power cable that is provided with the switch.

July 2015 Installation Job Aid for Avaya VSP 4000 4450GSX series 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avaya Server Handbücher

Avaya

Avaya Definity Enterprise Communications Server Bedienungsanleitung

Avaya

Avaya G700 Leitfaden

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya Polycom SpectraLink 8400 Series s Bedienungsanleitung

Avaya

Avaya P133F2 Bedienungsanleitung

Avaya

Avaya S8700-Series Bedienungsanleitung

Avaya

Avaya CallPilot 600r Handbuch

Avaya

Avaya CallPilot 600r Einrichtungshandbuch

Avaya

Avaya 1000 Series Bedienungsanleitung

Avaya

Avaya CS7000 Service-Handbuch

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya Comdial DXP 7042 Kurzanleitung

Avaya

Avaya Definity SI Bedienungsanleitung

Avaya

Avaya S8500 Series Gebrauchs- und Pflegehandbuch

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8510 Bedienungsanleitung

Avaya

Avaya IP600 Installationsanleitung

Avaya

Avaya S8300 Series Bedienungsanleitung

Avaya

Avaya S8730 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung