Avaya Comdial DXP 7042 Kurzanleitung

Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA Inc.’s experience

configuring its systems. These notes cannot anticipate every configuration possibility given the inherent

variations in all hardware and software products. Please understand that you may experience a problem

not detailed in a Configuration Note. If so, please notify the TAC/TSO at (408) 922-1822 and if

appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or

omissions contained herein.

Octel® 100

Messaging Server

Configuration Note 7042

Comdial DXP*

Revised 06/21/01

Personal Computer

Voice Board(s)

Digital Ports

Comdial

DXP ATI ATI ATI ATI One ATI

per port

There are two other ways

to attach the Comdial DXP.

See paragraph 3.0

1.0 METHOD OF INTEGRATION

Inband. Call forward to personal greeting is achieved via DTMF signals

passed from the Comdial DXP to the Octel 100, hereafter identified by

(O100). Message waiting indicators are set and canceled by dialing a

feature access code followed by the extension number. A hook flash

followed by the extension transfers outside callers to the operator (internal

transfers are not possible).

1.1 SUPPORTED VOICE PROCESSING MODULE

The Octel 100 is a Year 2000 (Y2K) compliant, PC based, enhanced voice

messaging product release intended to replace the OPC, Signature

Performer, CEO, CP, and CP+ product lines. For installed systems that

Communications between the

Comdial DXP and the O100 are

via DTMF Inband Signaling.

Supported Voice Processing

Module

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 2

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

have port capacities above 16 ports contact your Avaya representative for

the proper solution

2.0 O100 ORDERING INFORMATION

There are many options available for this product, depending on the

application. Voice Boards supported:

Dialogic DIALOG/4 ™

Fax Boards supported:

Brooktrout TruFax®200

Optional Remote Service

Internal Modem

Please consult with your sales representative.

2.1 VOICEMAIL PORTS SUPPORT

Standard configuration for this integration is 16 ports Max. Provision has

been made that based on the type of Platform and Sentinel, that a max 32

ports may be achieved. Contact your Avaya Inc representative if more

then 16 ports are required.

3.0 COMDIAL HARDWARE REQUIREMENTS

•O100 can be attached to Digital Station ports using an ATI-D-1PT,

Analog Station Ports using VMI-X, or Industry Standard Stations

using additional DTMF Receivers and an external Ring Generator.

Each configuration is listed below with their corresponding part

numbers. You can combine any of the configurations listed below.

–Digital Station Card DXDST-8 (8 port) or DXDST-16 (16 port).

Each O100 port requires an Analog Terminal Interface (ATI-D-

1PT, one per O100 port). Instructions for installing the Digital

Station Cards with the ATI-D-1PT can be found in Comdial's IMI-

89-037.

–Analog Station Card DXAST-8 (8 port) or DXAST-16 (16 port).

A Voice Mail Interface (VMI-X, one for every two O100 ports) is

required for every two O100 ports. Instructions for installing the

Analog Station Cards with the VMI-X can be found in Comdial's

IMI-89-023.

–Industry Standard Card DXIST-8 (8 port) or DXIST-16 (16 port).

An external ring generator (DXRNG) and additional DTMF

Receivers are required if O100 is installed on Industry Standard

Ports. The DXP CPU card has two DTMF Receivers, additional

DTMF Receivers can be installed on an Auxiliary Circuit Board

(DXAUX). Each DTMF Receiver Card (DXOPT-TON) provides

four additional DTMF Receivers. Instructions for installing

Industry Standard Station Cards can be found in Comdial's IMI-89-

078.

O100 Ordering Information

This integration will support 16

ports

Switch hardware requirements

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 3

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

3.1 COMDIAL DXP SOFTWARE REQUIREMENTS

•Rev. 7.A and above

3.2 ADDITIONAL MATERIAL REQUIREMENTS

•When using the DIALOG/4 you will need:

–One RJ-14 jack with 4-conductor line cord for every two O100

ports The specific configuration will vary depending on the type of

station card being used with the DXP. Refer to the appropriate

Comdial Installation Instructions (listed above in 3.0).

•One analog line for remote service access

•One RJ-11 Jack for above and 2-conductor modular telephone cord.

•If FaxMail is installed.

–One analog line per FAX port. The specific configuration will vary

depending on the type of station card being used with the DXP.

Refer to the appropriate Comdial Installation Instructions (listed

above in 3.0).

–One RJ-11 Jack for every Brooktrout TruFax®200, along with

4-conductor modular telephone cords.

4.0 SUPPORTED FEATURES

[ü] Items are supported

System Forward to Personal Greeting Multiple Return to Operator 1[ü]

All Calls [ ]Direct Call 2[ü]

Ring/no answer [ ]Auto Attendant 1[ü]

Busy [ ]Outcalling [ü]

Busy/No Answer [ü]Personal Greeting of Original-Called Party

Do Not Disturb [ ]Multiple Call Forward [ ]

Station Forward to Personal Greeting Double Call Forward [ ]

All Calls [ü]Call Coverage [ ]

Ring/no answer [ ]Intercom Paging [ ]

Busy [ ]Supervised Transfers 1

Busy/No Answer [ü]Call Screening 1[ü]

Do Not Disturb [ ]Call Queuing 1[ü]

Flexible Forwarding Intercom Paging 1[ü]

Forward to No Answer Greeting [ ]Identify Calling Party (Ver. 2.0 and up)

Forward to Busy Greeting [ ]System Forward to Personal Greeting [ ]

Intercom/CO Forwarding [ ]Station Forward to Personal Greeting [ ]

Message Waiting Flexible Forwarding (NA with CO) [ ]

LCD Display [ ]Record Telephone Conversation [ ]

LED [ü]

Lamp [ ]

Audible / Stutter Dial Tone [ü]

Note 1External Callers Only, See Section 7.1

2 Direct Call Limitations, See Section 7.4

Switch Software Requirements

Additional Material Requirements

Supported Integration Features

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 4

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

4.1 DISCONNECT TYPE

Disconnect is achieved via an A Tone sent from the DXP. For proper

external disconnect supervision, Ground start or Supervised Loop start CO

lines are recommended.

5.0 CONFIGURING THE COMDIAL DXP

Before you begin programming, it is recommended that a hard copy of the

customer database be obtained to verify existing programming.

Refer to the Programming section in the Comdial DXP manual for

information on entering, saving, and exiting database programming.

5.1 CONFIGURING STATION PORTS FOR O100

After installing the appropriate interface devices for the O100 ports

(VMI-X for analog stations, ATI-D-1PT for digital stations, or DXIST for

industry standard stations), you must identify the ports where the devices

are connected. Program as follows:

1. From Main Menu, select Stations.

2. From Stations Menu, select Phone Types.

3. Enter the row number for the station port type. (ExecuTech=analog,

DigiTech=digital, IST=industry standard).

4. Enter row number for the device that is connected to the O100 port

(VMI-X or ATI-D-1PT). This step is not required for IST.

5. Enter the O100 station port number.

Repeat this step for each O100 port.

5.2 ASSIGNING O100 PORTS TO EXECUMAIL TABLE

This procedure is required to provide Voice Mail functionality to the O100

ports and also forms a circular hunt group for the O100 ports.

1. From Main Menu, select Peripherals.

2. From Peripherals Menu, select ExecuMail.

3. Enter the row number for the O100 port to be assigned as ExecuMail.

4. Enter the Intercom Number (or name) of the O100 port.

5. Press TAB to move cursor to the Linked Station field and enter the

intercom number (or name) of the next O100 port (link the last O100

port to the O100 port in the first row).

6. Press ESCAPE and repeat steps 4-6 for the next row number.

5.3 CONFIGURING O100 PORT TRANSFER PARAMETERS

O100 listens for DTMF to determine call progress. Two DXP transfer

parameters could conflict with O100 call progress, Automatic Attendant

Transfer on Busy and Immediate Transfer. Both of these should be disabled.

Disable Automatic Transfer on Busy as follows:

Disconnect Type

Programming switch

parameters

Configuring Station Ports

for O100

Assigning O100 Ports to

ExecuMail Table

Configuring O100 Port

Transfer Parameters

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 5

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

1. From Main Menu, select Stations.

2. From Stations Menu, select Station Programming.

3. Enter the Intercom Number (or name) of the O100 port.

4. Enter the item number for the feature "Auto Att Transfer on Busy".

5. Press Space to toggle for the desired setting ("NO").

6. Press ESCAPE twice when finished.

Do this for each O100 port.

Disable Immediate Transfer as follows:

1. From Main Menu, select System.

2. From System Menu, select System Parameters.

3. Enter item number for the feature (Immediate Transfer).

4. Press Space to toggle for the desired setting ("NO").

5. Press ESCAPE twice when finished.

5.4 CONFIGURING O100 PORT RINGING ASSIGNMENTS

The Comdial DXP can be programmed to ring at the O100 port directly,

delayed, or at night. Direct ringing will ring the O100 port immediately.

With delayed ringing, calls wait before ringing the O100 port. Delayed

ringing can be used to provide for operator overflow.

Ringing assignments are programmed as follows:

1. From Main Menu, select Stations.

2. From Stations Menu, select Station Programming.

3. Enter the intercom number of the first O100 port.

4. Enter the Item Number of the feature (Direct Ring, Delayed, etc.).

5. Press CONTROL-E

6. Enter "a" for add or "r" for remove, press Enter.

7. Enter the line port numbers (1-128) for the line you want to ring O100.

8. Press ESCAPE twice when you are finished.

5.5 CONFIGURING SPECIFIC GREETING BY LINE

As an option, you can have O100 answer with a greeting specific to the

line it came in on. This is done by programming the line with an

ExecuMail ID that corresponds to a Mailbox in the O100 that is set up

with a Vtree that answers calls according to how you set the Vtree up for

that line.

Program the ExecuMail ID as follows:

Configuring O100 Port Ringing

Assignments

Configuring Specific Greeting By

Line

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 6

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

1. From Main Menu, select Lines.

2. From Lines Menu, select Line Programming.

3. Enter the Line you want to program an ExecuMail ID for.

4. Enter the item number for the feature (ExecuMail ID).

5. Enter the Vtree Mailbox Number plus "2", press Enter.

(example, Vtree Mailbox=300, ExecuMail ID = 3002)

6. Press ESCAPE twice when you are finished.

5.6 CONFIGURING CALL FORWARD

This section contains information on programming System Call Forward

to Personal Greeting and Station Call Forward to Personal Greeting.

System Call Forward to Personal Greeting is a feature provided for

individual extensions by the System Administrator through station

programming. It automatically forwards their phone to O100 under

busy/no answer conditions without the subscriber having to set call

forwarding from the station. System Call Forwarding is overridden if

Station Call forwarding is set.

Program System Call Forwarding as follows:

1. From Main Menu, select Stations.

2. From Stations Menu, select Stations Programming.

3. Enter the intercom number of the station you want to set for call

forwarding, press enter.

4. Enter the Item Number of the feature (Default FWD Type).

5. Press Space bar to toggle for desired setting ("Itcm FWD"), press

Enter.

6. Enter the Itcm FWD To: (first O100 Port), press Enter.

7. Press Space bar to toggle for desired setting ("All Calls").

8. Press Escape.

9. Enter the Item number of the feature (RNA Rings), press Enter.

10. Enter the number of rings before the system will forward the call to

O100, press Enter. (Note: Ensure that RNA rings for the station is than

the Station Transfer Recall Timer. Otherwise, transferred will recall

to the station that transferred rather than forwarding to O100.)

11. Press Escape twice when you are finished.

Station users can set call forwarding by using the LCD Display Menus or

by dialing feature codes. System Call Forwarding is overridden if Station

Call forwarding is set.

Subscribers can set Call Forward/All Calls from their stations as follows:

1. Press INTERCOM and listen for dial tone.

2. Dial *52.

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 7

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

3. Dial extension number of the first O100 port.

4. Hang up.

Subscribers can set Call Forward Busy/No Answer from their stations as

follows:

1. Press INTERCOM and listen for dial tone.

2. Dial *54.

3. Dial extension number of the first O100 port.

4. Hang up.

Cancel Station Call Forward as follows:

1. Press INTERCOM and listen for dial tone.

2. Dial #5.

3. Hang up.

5.7 CONFIGURING VOICE MAIL TRANSFER BUTTON

The system administrator can pre-program a button to transfer an incoming call

directly into a voice mail box on O100. The subscriber can press the button plus

the target mailbox number, and the call will be sent directly to the mailbox

greeting.

Program the Voice Mail Transfer button as follows:

1. From Main Menu, select Stations.

2. From Stations Menu, select Button Mapping.

3. Enter the intercom number for the station(s) you want to program with

this feature (the terminal will display a button map with current

assignments).

4. Enter the code for the button you want to program (L1-L25), press Enter.

5. Enter the mnemonic (XVM) for Transfer to Voice Mail plus the 2

digit code for which O100 port (found in the ExecuMail table, 01-32)

you want it to transfer to (typically the first O100 port, example

XVM01).

6. Press Escape twice when you are finished.

6.0 CONFIGURING THE O100

Section 6.1 is used for integrating O100 which provides for the detection

of caller id when available from the PBX. During the install process run

the Integrator program and select the Comdial DXP switch. The Integrator

will place appropriate feature codes into the O100 Setup.

6.1 INTEGRATING O100 VERSION 2.0 AND ABOVE

The Integrator inserts the following codes. Adjust to match site requirements.

O100 Configuration

Integrating O100 Version 2.0 and

above

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 8

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

Outside Line Access Code 9,

Off Hook Delay (OFFHDLY) 50

Hook Flash Interval (FLINTVL) 50

DTMF Tone Length (TONELEN) 8

Transfer, Paging and Screening Parameters

Custom Transfer Code A&,XDR

Custom Message Delivery Code AXD

Intercom Paging Code A&,C270NR

Transfer Release Code when Busy &

Transfer Release Code when No Answer &

Call Screening Release Code when Busy &

Call Screening Release Code when No &

Call Screening Release Code when Reject &

Call Screening Release Code When Transfer &

Release Code for Intercom Paging &

Message Waiting Parameters

Permit Message Waiting Lights üü

Message Waiting Light Prefix ON *3

Message Waiting Light Prefix OFF #3

Hangup Detection Parameters

Hangup String (HANGUPSTR) A

Hangup String Timeout (HANGUPDLY) 50

Inband Parameters

Total Number of DID Digits 8

Seconds to Wait for First Digit 1

Millisecs to Wait for Next Digit 500

Inband Templates

R2 Go to Voice Mail

R3 Auto Login

These Codes apply to the Inband Template:

R = Receiving Mailbox

S = Sending Mailbox

X = Ignore Character

Valid Characters are:

~ $ * # 0-9 A-D F N T

Note: Verify all these dialing sequences for your PBX.

7.0 CONSIDERATIONS / ALTERNATIVES

The following items should be considered, below:

Internal transfers

No Dialer or Immediate Call with Visual Mailbox

Call Screening

FaxMail

Direct Call (for message retrieval)

Unsupervised CO Lines

Important notes concerning this

integration

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 9

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

7.1 INTERNAL TRANSFERS

Ports programmed as ExecuMail cannot place internal (intercom) calls on

hold, and thus cannot transfer internal calls. Due to this limitation, all

Automated Attendant and Subscriber functions that require O100 to perform a

transfer will fail if the subscriber (or caller) is calling from an internal

extension. For example: Joe places an intercom call to Mary, Mary's phone

is programmed to forward to O100. While Joe is listening to Mary's personal

greeting, he presses 0 to reach Mary's Personal Operator. The transfer will

not be complete and Joe will be dropped. If Joe was calling from an outside

line, the transfer would be successful. Careful consideration must be used

when using features such as Call Queuing, since an internal caller will never

advance beyond the first position and will prevent all others queued to the

extension from advancing.

7.2 NO DIALER OR IMMEDIATE CALL WITH VISUAL

MAILBOX

If the Visual Mailbox product is used (an option starting with version 2.0

software), Dialer and Immediate Call functions will not operate due to switch

design shortcomings discussed above under “Internal Transfers.”

7.3 CALL SCREENING

O100 must establish a three way conference in order to return to the calling party

if the subscriber wishes to reject or redirect a call. When using Call Screening to

redirect or reject a call, the subscriber must wait until the entire phrase "Please

hang up now to transfer the caller" or "Thank you, good-bye" is voiced before

hanging up. Subscribers who have not been trained on the proper use of Call

Screening should have the feature disabled in the Mailbox Class of Service.

7.4 FAXMAIL

DXP ports that are programmed as ExecuMail ports cannot place internal

(intercom) calls on hold, and thus cannot transfer. Due to this limitation, the

Local Fax Machine must be attached to an outside line.

7.5 DIRECT CALL (FOR MESSAGE RETRIEVAL)

If a station is programmed to forward to O100 (System Forward or Station

Forward), the subscriber can dial his own extension and the call will forward

to the Personal Greeting. During the Personal Greeting, the subscriber can

press the pound key (#) and O100 will ask for the subscribers password. This

will provide for quicker access to the mailbox for message retrieval.

7.6 UNSUPERVISED CO LINES

The O100 may experience delays in disconnecting if using unsupervised

trunks.

Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 10

The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the

disclaimer on page 1

Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.

Avaya

Communications Applications Group

If Call Queuing is used, enable the System Parameter “Require Caller to Press

Star to Stay in Queue”. Unsupervised CO lines will cause the Subscriber to

receive phantom calls because of callers who have decided not to wait in

queue. This will alleviate the perception that the called subscriber is losing

calls.

servicemarks or trademarks respectively. All other trademarks are properties of their respective owners. The above

information is based on knowledge available at the time of publication and is subject to change without notice.

DIALOG/4 ™ is a registered trademark of Dialogic Corporation

TruFax is a registered trademark of Brooktrout Technology Inc.

*Trademark of Comdial Corporation

Printed in the United States

AVAYA Inc.

1001 Murphy Ranch Road

Milpitas, CA 95035-7912

(408) 577-7000

http://www.avaya.com

(CFN 7042)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avaya Server Handbücher

Avaya

Avaya S87 0 Series Kurzanleitung

Avaya

Avaya AG250 Bedienungsanleitung

Avaya

Avaya CallPilot 201i Einrichtungshandbuch

Avaya

Avaya DEFINITY SERIES Bedienungsanleitung

Avaya

Avaya S8300 Series Bedienungs- und Sicherheitshinweise

Avaya

Avaya G650 Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya INTUITY AUDIX Bedienungsanleitung

Avaya

Avaya CS7000 Service-Handbuch

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S8500 Series Montageanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya INTUITY AUDIX Kurzanleitung

Avaya

Avaya S8700 Series Installationsanleitung

Avaya

Avaya S8700-Series Bedienungsanleitung

Avaya

Avaya CallPilot 201i Handbuch

Avaya

Avaya Aura S8800 Bedienungsanleitung

Avaya

Avaya QuesCom 400 Leitfaden

Avaya

Avaya S8400 Bedienungsanleitung

Avaya

Avaya IP Office HP DL360G7 Service-Handbuch

Avaya

Avaya Definity Enterprise Communications Server Bedienungsanleitung

Avaya

Avaya AG250 Handbuch

Avaya

Avaya S8730 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung