Broseley Evolution Endure Installationsanleitung

Inhaltsverzeichnis

Andere Broseley Herd Handbücher

Broseley

Broseley Canterbury PD-08-002 Bedienungsanleitung

Broseley

Broseley Canterbury Handbuch

Broseley

Broseley GB09b Bedienungsanleitung

Broseley

Broseley York Midi Bedienungsanleitung

Broseley

Broseley Lincoln Handbuch

Broseley

Broseley Snowdon 30 Handbuch

Broseley

Broseley Canterbury Benutzerhandbuch

Broseley

Broseley evolution Ignite 5 Widescreen Handbuch

Broseley

Broseley eVolution Montageanleitung

Broseley

Broseley Ignite 5 Handbuch

Broseley

Broseley 12B Handbuch

Broseley

Broseley York Midi Bedienungsanleitung

Broseley

Broseley Inset Ignite 6 Remote Handbuch

Broseley

Broseley York Grande Bedienungsanleitung

Broseley

Broseley Serrano 3 Bedienungsanleitung

Broseley

Broseley Lincoln Bedienungsanleitung

Broseley

Broseley eVolution 4 Handbuch

Broseley

Broseley YORK Bedienungsanleitung

Broseley

Broseley WINCHESTER Bedienungsanleitung

Broseley

Broseley WINCHESTER Bedienungsanleitung

Broseley

Broseley THURCROFT Betriebsanleitung

Broseley

Broseley Evolution 5 Multi-fuel Handbuch

Broseley

Broseley Canterbury Bedienungsanleitung

Broseley

Broseley Lincoln Handbuch

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung

Regency

Regency Ultimate U39E Series Kurzanleitung

Barton

Barton FH-AMP8745 Technisches Dokument

BALFLUE01 19/06/2017

Endure Balanced Flue Gas Stove

Stove Body (with bracket) Fitting Instruction

Your balanced flue stove will be supplied in two main components (Stove body with bracket and the

balanced flue gas burner).

Prior to installing the balanced flue gas burner as described in instruction P-XX1561 Issue 2

(200757_01_BM-07) the following sequence will guide you through attaching the stove body to the

balanced flue gas burner.

-- IMPORTANT –READ THIS FIRST BEFORE COMMENCING INSTALLATION --

BALFLUE01 19/06/2017

1.0

Please note the stove body will be delivered upside down on the pallet.

Remove the transit bracket to enable the stove body to be removed from the pallet, now remove

the front two bolts to disconnect the securing bracket from the stove.

Transit Bracket

Front Bolts

BALFLUE01 19/06/2017

2.0

Next attach the bracket to the balanced flue gas burner. Remove four screws from the flue collar of

the balanced flue gas burner and place bracket over the collar, once in place secure the bracket with

the four screws ensuring screws are tightened.

Bracket (showing hole for the flue

collar and 4x screw fixing points).

BALFLUE01 19/06/2017

3.0

Now the bracket has been fitted to the balanced flue gas burner the four arms of the bracket will

need to be adjusted so it can be fastened to the wall, to adjust the arms loosen the nuts / bolts and

fully remove the bolts.

Adjust them to the required distance and reinsert the bolts ensuring the nuts are fully tightened.

Drill and plug the wall with suitable wall plugs (not supplied).

The balanced flue gas burner can now be installed as per installation instructions P-XX1561 Issue 1

(200757_01_BM-07).

BALFLUE01 19/06/2017

4.0

Once the balanced flue gas burner installation is complete the stove body can be fitted. To do this

offer the stove body up to the balanced flue gas burner ensuring it is central and the holes in the top

spigot hole line up with the two holes in the top of the bracket which is fastened to the balanced

flue gas burner.

Using the two bolts provided fasten down through the stove body into the bracket.

The installation of the product is now complete.

Finally place the ash pan cover into position at the

base of the stove body, the ash pan cover is free

standing as it will need to be removed to operate

the appliance. Once the appliance has been lit the

ash pan cover can be replaced. A blanking plate is

provided and will sit loosely on the top of the

stove to conceal the bracket fixings. Alternatively

a dummy flue spigot can be provided as an option

to sit in this position (to enable a dummy flue pipe

to be connected –not supplied). To attach the

dummy spigot securely use the three bolts

provided (two of which are actually the bracket

bolts).

Blanking Plate