Burley Solo Jogger Bedienungsanleitung

Burley Solo Jogger

Owner’s Instruction and Safety Manual

Burley Solo Jogger Manual

YOUR BURLEY SOLO JOGGER

We’ve increased the fun and excitement you and your family will have

by creating the Burley Jogger accessory for your Burley child trailer. By

following the instructions below, you can convert your Burley Solo from a

trailer to a jogger in no time! See your trailer manual for the best way to use

your child carrier safely.

Jogger Contents

Tools You Will Need:

• Small Phillips screwdriver which ﬁts snap screws in the kit.

• Medium Phillips screwdriver which properly ﬁts the bolts in the kit

(#3 or about 5/16” diameter head)

• 7/16” wrench

• 10mm wrench

Quick-Release

Skewer

Brake Cable Clip

Jogger unit

Bolt and

Cap Nut

Jogger wheel

Tongue

Receptacles

Burley Solo Jogger Manual

PUTTING YOUR JOGGER ON YOUR TRAILER:

Only install the jogger when the trailer is empty. Engage the parking brake

on your trailer and detach the trailer tongue.

A. Remove the right

front bolt on your trailer.

replace the bolt with a

new tongue receptacle

(open side facing down).

Use a properly ﬁtting

screwdriver and about

70-in.-lbs torque or use a

threadlocking compound.

B. Find the second hole in the trailer frame (about 9.5” behind the ﬁrst

hole). Make a hole in the fabric usng a drill or a screwdriver. Bolt the tongue

receptacle into the frame with the nut provided (open side facing up).

1. The brake should be oriented on the bottom of the jogger, with the pads

towards the wheel dropouts.

2. Position the left jogger arm and insert it on the pivot pin as shown.

3. Align both the right and left jogger arms with the tongue receptacles.

4. Rotate the two arms until they snap securely in place.

Secure the left jogger arm by pushing

the lockpin fully into the front tongue

receptacle. Anchor the lockpin by

inserting the hairpin cotter all the way

in to the hole in the lock pin.

123

Hairpin Cotter

Burley Solo Jogger Manual

Release the brake quick-release

by pushing the lever towards the

trailer (a). You may need to push

the brake pads together (b).

Put the quick-release skewer through

the hub of the wheel. Make sure that

the springs are on either side of the hub.

Screw the nut on loosely.

Attach the jogger

wheel to the

dropout.

Hold the lever perpendicular to the wheel.

Tighten the adjusting nut until you

feel resistance. DO NOT TIGHTEN BY

SPINNING THE LEVER.

Close the lever ﬁrmly. The lever should be

parallel to the dropout and should leave

a slight impression in your hands as it

closes.

Burley Solo Jogger Manual

NOTE: It is important to install the wheel correctly. If you

have any doubts, see your local bicycle dealer for detailed

instructions.

1. Align the bolt with

the center of the wheel.

Loosen the bolt on the left if

necesary.

2. Tighten the bolt and

quick-release.

Engage the brake quick-release.

Push the lever toward the wheel.

You may need to push the brake

pads together.

Unscrew the

snaps as shown.

Reattach them

with the brake

cable clips.

Thread the brake

cable as seen

here.

Burley Solo Jogger Manual

Make sure your handlebars are at the right

height for jogging. You can turn the handle

upside down for a different height.

Push the foam on the handlebars to either side

and clamp the brake lever to the handle bar,

twisting it to a comfortable position.

Make sure brake pads

are centered on the wheel rim,

twist the brake if necessary.

Adjust the brake pads and cables

fortheproperﬁtoraskyourlocal

bike dealer to adjust them for

you. Make sure the wheel comes

off easily when the quick-release

lever is opened, and make sure

the brake functions correctly.

Burley Solo Jogger Manual

Aligning the Wheel

Makesurethejoggerwheel is

aligned vertically.

If the wheel is tilted when

the jogger in installed on the

trailer:

1. Loosen the nuts on the

wheel dropouts

2. Align the wheel vertically

3. Retighten the nuts on the

wheel dropouts

USING YOUR JOGGER

Test your Jogger and feel comfortable with it before attempting to use

it with a child. Install your Jogger on the trailer with the parking brake

securely engaged before putting your child in the trailer. Secure your child

as explained in your trailer manual.

Use the Jogger only on paths that are meant for jogging or walking. Do

not use the Jogger on steep slopes, which makes the trailer unstable. You

should be able to maintain traction and control of your trailer at all times.

Always use the handle bar tether to prevent the trailer getting loose. Do not

maneuverthetrailerover stairs or other obstacles other than low curbs while

your child is in the trailer. Never use your Jogger with roller or inline skates.

While using the Jogger you have two braking options: a slowing down

brake while you’re running, which is mounted on the handle bar; and a

parking brake.

Never leave your child unattended in the Jogger. Engage the parking brake

when taking your child out of the trailer.

1, 3 2

(Front View)

Converting your Solo from a Jogger into a trailer is quick and easy…simply

reverse the steps described above.

1. Remove the brake lever from the handle.

2. Remove the brake cable from the cable clips.

3. Take the lock pin out of the tongue receptacle. Brace the underside

of the trailer and pivot the two jogger arms down. You can also

release the jogger wheel and pivot each arm individually, if

necessary.

4. Remove the jogger unit from your trailer.

5. Attach the trailer tongue as described in your Solo trailer instruction

manual.

MAINTENANCE

Make sure all of the nuts and bolts are secure on your Jogger. Make sure

that the brake is working properly. If you are unsure as to the operation and

maintenance of the jogger unit, please contact your local bike dealer.

Burley Jogger Limited Warranty

Burley will repair or replace any Jogger parts it determines to be defective for the life of

the trailer. The owner of a Burley trailer with Jogger parts installed must present the trailer

for repair at an authorized Burley dealer, together with an original sales receipt or similar

proof of purchase. This warranty applies only to the original owner and is nontransferable.

Burley cannot be responsible for failure due to improper assembly, modiﬁcation of parts

or instructions, neglect, abuse, accident, and/or normal wear. The warranty does not cover

any trailers used for rental, competition, or commercial use, nor does it cover Jogger parts

used on anything other than a Burley trailer. Burley neither assumes nor authorizes any

person to assume any other liability in connection with Burley trailers, and there are no oral

agreements or warranties collateral to or affecting this agreement. This warranty gives you

speciﬁc legal rights. You may also have other rights which vary from state to state.

“Burley” is a registered trademark of Burley Design Cooperative

Printed on recycled paper rev4: 04/04

Burley Design Cooperative • 4020 Stewart Rd. • Eugene, OR 97402 USA

(541) 687-1644 • Fax (541) 687-0436 • email: [email protected] • www.burley.com

Inhaltsverzeichnis

Andere Burley Fahrradzubehör Handbücher

Burley

Burley NOMAD RACK Bedienungsanleitung

Burley

Burley Plus Trailercycle Bike Conversion Kit Einrichtungshandbuch

Burley

Burley D'Lite X Bedienungsanleitung

Burley

Burley ENCORE Bedienungsanleitung

Burley

Burley Hitch Flex Connector Bedienungsanleitung

Burley

Burley Honey Bee Bedienungsanleitung

Burley

Burley SOLO Bedienungsanleitung

Burley

Burley Forged Standard Hitch Bedienungsanleitung

Burley

Burley COHO 16PLUS Bedienungsanleitung

Burley

Burley PICCOLO Bedienungsanleitung

Burley

Burley PICCOLO Bedienungsanleitung

Burley

Burley Travoy Bedienungsanleitung

Burley

Burley COHO PANNIER RACK Bedienungsanleitung

Burley

Burley PICCOLO Bedienungsanleitung

Burley

Burley Encore X Bedienungsanleitung

Burley

Burley BEE Bedienungsanleitung

Burley

Burley Cub X Bedienungsanleitung

Burley

Burley DASH FM Bedienungsanleitung

Burley

Burley Pre-2004 d'Lite Bedienungsanleitung

Burley

Burley Trailer Bedienungsanleitung

Burley

Burley Tail Wagon Bedienungsanleitung

Burley

Burley NOMAD RACK Bedienungsanleitung

Burley

Burley Travoy Bedienungsanleitung

Burley

Burley NOMAD RACK Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung