Canon EF16-35mm f/4l IS USM Bedienungsanleitung

EF16-35mm f/4L IS USM

Instructions

ENG

COPY

ENG-1

Thank you for purchasing a Canon product.

Canon’s EF16-35mm f/4L IS USM is a high-

performance ultra-wide angle zoom lens, for use

with EOS cameras. The lens is installed with an

Image Stabilizer.

 “IS” stands for Image Stabilizer.

 “USM” stands for Ultrasonic Motor.

Features

1. Equipped with an Image Stabilizer that provides

an image stabilization effect equivalent to a

shutter speed 4 stops* faster (at 35 mm, when

used with the EOS-1D X).

This function provides optimal image

stabilization depending on shooting conditions

(such as shooting still subjects and following

shots).

2. Use of UD and aspherical lens elements giving

superior denition.

3. Using a uorine coating on the foremost and

rearmost lens surfaces allows adhered dirt to be

removed more easily than before.

4. Ultrasonic motor (USM) for fast, quiet autofocus.

5. Manual focusing is available after the subject

comes into focus in autofocus mode (ONE

SHOT AF).

6. Circular aperture for producing beautiful

softfocus images.

7. Tight seal structure ensures excellent dustproof

and drip-proof performance.

ySince the front element of this lens moves when

zooming, you need to attach a Canon PROTECT

lter sold separately for adequate dust-and water-

resistant performance. Without a lter, the lens is

not dust or water resistant.

* Image stabilization performance based on CIPA

(Camera & Imaging Products Association) Standards.

COPY

ENG-2

Safety Precautions

 Do not look at the sun or a bright light source

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

 Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun’s rays, which could cause a re.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Handling Cautions

 If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, rst put the lens into an airtight plastic bag

before taking it from a cold to warm environment. Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment

into a cold one.

 Do not leave the lens in excessive heat such as in a car

in direct sunlight. High temperatures can cause the

lens to malfunction.

COPY

ENG-3

This device complies with Part

15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modications to the equipment

unless otherwise specied in the instructions. If such

changes or modications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Safety Precautions

CAN ICES-3 (B) / NMB-3 (B)

COPY

ENG-4

Nomenclature

 For detailed information, reference page numbers are provided in parentheses (→ **).

Focus mode switch (→ 6)

Distance scale (→ 7)

Zoom ring (→ 6)

Rubber ring (→ 5)

Hood mount (→ 10)

Filter Mounting Thread

(→ 11)

Focusing ring (→ 6)

Image stabilizer switch (→ 8) Lens mount index (→ 5)

Contacts (→ 5)

COPY

ENG-5

1. Mounting and Detaching the Lens

See your camera’s instructions for details on

mounting and detaching the lens. The lens mount has a rubber ring for enhanced

dust- and water-resistance. The rubber ring may

cause slight abrasions around the camera’s lens

mount, but this will not cause any problems. If the

rubber ring becomes worn, it is replaceable by a

Canon Service Center at cost.

 After detaching the lens, place the lens with

the rear end up to prevent the lens surface and

contacts from getting scratched.

 If the contacts get soiled, scratched, or have

ngerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

 If the contacts get soiled or have ngerprints on

them, clean them with a soft cloth.

 If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the  index of the dust cap as shown

in the diagram, and turn clockwise. To remove it,

reverse the order.

COPY

ENG-6

Setting the Focus Mode

Zooming

After autofocusing in ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To shoot in manual focus (MF) mode, set the

focus mode switch to MF, and focus by turning

the focusing ring.

The focusing ring always works, regardless of

the focus mode.

To zoom, rotate the zoom ring.

Be sure to nish zooming before focusing. Zooming

after focusing can affect the focus.

COPY

ENG-7

Innity Compensation

Mark

For accurate manual focusing of subjects at innity,

look through the viewnder or look at the magnied

image* on the LCD screen while rotating the

focusing ring.

To compensate for shifting of the innity focus

point that results from changes in temperature.

The innity position at normal temperature is the

point at which the vertical line of the distance

scale L mark is aligned with the distance index.

Distance index

Innity compensation

mark

* For cameras with Live View shooting capability.

5. Infrared Index

 The infrared index position is based on a

wavelength of 800 nm.

 The compensation amount differs depending on

the focal length. Use the indicated focal length

as a guide when setting the compensation

amount.

 Be sure to observe the manufacturer’s

instructions when using infrared lm.

 Use a red lter when you take the picture.

Some EOS cameras cannot use infrared lm. See

the instructions for your EOS camera.

The infrared index corrects the focus setting

when using monochrome infrared lm. Focus on

the subject manually, then adjust the distance

setting by moving the focusing ring to the

corresponding infrared index mark.

COPY

ENG-8

6. Image Stabilizer

You can use the image stabilizer in AF or MF mode.

This function provides optimal image stabilization depending on

shooting conditions (such as shooting still subjects and following

shots).

OFF

The image stabilizer in this lens is

effective for hand-held shots under the

following conditions.

 In semi-darkened areas such as

indoors or outdoors at night.

 In locations where ash

photography is prohibited, such as

art museums and theater stages.

 In situations where your footing is

uncertain.

 When panning subjects in motion.

 In situations where fast shutter

settings cannot be used.

When you press the

shutter button halfway, the

Image Stabilizer will start

operating.

 Make sure the image in the

viewnder is stable, then

press the shutter button the

rest of the way down to take

the picture.

1 Set the STABILIZER

switch to ON.

 If you are not going to use the

image stabilizer function, set

the switch to OFF.

COPY

ENG-9

 When shooting a still subject, it compensates for

camera shake in all directions.

 It compensates for vertical camera shake during

following shots in a horizontal direction, and

compensates for horizontal camera shake during

following shots in a vertical direction.

 When you use a tripod, the Image Stabilizer

should be turned off to save battery power.

 The stabilizer is equally effective for hand-

held photography and photography with a

monopod. The Image Stabilizer effect may be

reduced, however, depending on the shooting

environment.

 The image stabilizer function also operates when

the lens is used with an Extension Tube EF12 ll

or EF25 ll.

 Pictures may look distorted after being taken

depending on the camera, but this doesn’t affect

shooting.

 If you set the camera’s Custom Function to

change the assigned button to operate the AF,

the Image Stabilizer will operate when you press

the newly assigned AF button.

 The Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

 Set the STABILIZER switch to OFF when you

are taking pictures using the Bulb setting (long

exposures). If the STABILIZER switch is set to

ON, the image stabilizer function may introduce

errors.

 The Image Stabilizer may not be fully effective

if you shoot from a violently shaking vehicle or

other transportation.

 The Image Stabilizer consumes more power than

normal shooting, resulting in fewer shots and a

shorter movie shooting time.

 The image stabilizer operates for about two

seconds even when your nger is off the

shutter button. Do not remove the lens while

the stabilizer is in operation. This will cause a

malfunction.

 With the EOS-1V/HS, 3, ELAN 7E/ELAN

7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN

II/ELAN IIE/50/50E, REBEL 2000/300, IX, and

D30, the Image Stabilizer will not work during

self-timer operation.

Image Stabilizer

COPY

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon TS-E50mm f/2.8L MACRO Bedienungsanleitung

Canon

Canon EF-S18-55mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF-M 22mm f/2 STM Bedienungsanleitung

Canon

Canon RF 24-50mm F4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon RF600mm F11 IS STM Bedienungsanleitung

Canon

Canon HJ40x10B IASD-V Bedienungsanleitung

Canon

Canon EF 70-200mm Bedienungsanleitung

Canon

Canon EF 50mm 1:1.4 USM Bedienungsanleitung

Canon

Canon EF 50mm 1:2.5 MACRO(COMPACT Bedienungsanleitung

Canon

Canon EF85mm f/1.4L IS USM Bedienungsanleitung

Canon

Canon EF-S 60mm f/2.8 Macro USM Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF600mm f/4L IS II USM Bedienungsanleitung

Canon

Canon EF50mm 1/1.8 /I Bedienungsanleitung

Canon

Canon EF35mm f/2 IS USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon CN-E14-35mm T1.7 L SP Bedienungsanleitung

Canon

Canon EF-S 17-85mm f/4-5.6 IS USM Bedienungsanleitung

Canon

Canon CN-E45-135mm T2.4 L F Bedienungsanleitung

Canon

Canon TS E Bedienungsanleitung

Canon

Canon EF 85mm 1:1.2 L Bedienungsanleitung

Canon

Canon EF-S35MM F/2.8 MACRO IS STM Bedienungsanleitung

Canon

Canon digi super 86 XS Bedienungsanleitung

Canon

Canon EF 100mm f/2.8 Macro USM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung