Classic Exhibits Gravitee GK-1008 Handbuch

Inhaltsverzeichnis

Andere Classic Exhibits Inneneinrichtung Handbücher

Classic Exhibits

Classic Exhibits LT-116 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1722 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1005 Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYM-408B Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYK-2021 Handbuch

Classic Exhibits

Classic Exhibits eco systems ECO-4100 Handbuch

Classic Exhibits

Classic Exhibits MAGELLAN DESIGNS VK-1088 Bedienungsanleitung

Classic Exhibits

Classic Exhibits vilonary DESIGN MOD-1430 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1011 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-4022 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-2005 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1108 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-1131 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1247 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYK-1016 Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYM-408 Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS VK-3006 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1019 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYM-412 Handbuch

Classic Exhibits

Classic Exhibits LTG-1001 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1181 Bedienungsanleitung

Classic Exhibits

Classic Exhibits gravitee GOD-1557 Handbuch

Classic Exhibits

Classic Exhibits GRAVITEE GOD-1559 Handbuch

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-1218 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung

© 2023

Order #XXXXX

Locked layer contains

placeholder marks.

Plan View

10’

10’

GK-1008 10’ x 10’ Gravitee Inline

If you would like to tell us about your experience with your setup instructions please email us at [email protected]

SETUP INSTRUCTIONS

© 2023

Order #XXXXX

Locked layer contains

placeholder marks.

= 1 sq foot

Plan View

© 2023

Order #XXXXX General Information

Assembly Assembly Cont’d

Side-by-Side Assembly

1) Frames: Place frames side-by-side with one higher than the

other, then slide panel down to lock panels securely together.

2) Corner Connectors: Repeat Step 1 for installing corner

connectors to frames.

Side-by-Side Disassembly

1) Pull pin lock outwards to disengage.

2) Pull frames upward and apart at the same time to detatch.

Push pin lock into hole of connecting frame.

Note: Block on pin lock will secure in groove.

Pin Lock

General Setup Instructions

- Read entire setup instruction manual prior to

unpacking parts and pieces.

- The setup instructions are created specifically

for this configuration.

- Setup instructions are laid out sequentially in

steps, including exploded views with detailed

explanation for assembly.

Cleaning & Packing

- For Cleaning Metal, Plex, & Laminate Parts:

Use a MILD NON-ABRASIVE cleanser and

soft cloth/paper towel to clean all surfaces.

- Keep exhibit components away from heat

and prolonged sun exposure.

Heat and UV exposure will warp and

fade components.

- Retain all provided Packing Materials.

All provided packing materials are for

ease of repacking & component protection.

Disassembly

- For loss prevention, tighten all set screws

and locks during disassembly.

Graphic Removal

SEG Graphic Installation

Corner A

Corner D

Corner B

Corner C

It is important to first insert graphic

into each alternate corner, then to

the sides of the frame.

If this is not done, graphic will not fit

into the frame correctly.

Step 1

Insert corner A.

Turn edge of graphic so silicon welt

is perpendicular to face of graphic.

Insert narrow side of welt with fabric

to outside into the channel.

Repeat for other side of this corner.

Step 2

Repeat Step 1 for opposite corner

C, then insert corner B, followed by

corner D, to complete the

installation of the corners.

Step 3

Once all corners are inserted, press

one silicon edge into channel from

corners and work toward the center.

Make sure welt is fully inserted into

channel. Continue until all sides are

done. Smooth out edges of graphic.

To remove the graphic from

the frame, locate the fabric

pull tab.

Gently pull up on the tab to

remove the fabric.

© 2023

Crate 1 of 1

Order #XXXXX

Locked layer contains

placeholder marks.

CRATE PACKING

Crate Packing

© 2023

Step 1 of 5

Order #XXXXX

Locked layer contains

placeholder marks.

When assembled

FRONT VIEW

PLAN VIEW

Steps:

Refer to the Gravitee Assembly general information page.

1) Assemble Gravitee panels & posts [1] through [11]

in numerical order as shown.

Keep internal extrusions

attached to Gravitee panels.

DO NOT REMOVE.

1

1

2 3 45

23

456

6

7

7

8

8

9

9

10

10

11

11

Top View Top View

Top View

Top View

Top View

Item

1

2

3

4

5

6

7

8

9

10

11

Qty.

1

1

1

1

1

1

1

1

1

1

1

Description

14.125”w x 95”h Gravitee Panel

94.5”h Gravitee Corner Post w/ Caps Both Ends

38”w x 95”h Gravitee Panel

38”w x 95”h Gravitee Panel w/ 91.904” S44

94.5”h Gravitee Corner Post w/ Caps Both Ends

14.125”w x 95”h Gravitee Panel

94.5”h Gravitee Corner Post w/ Caps Both Ends

32.5”w x 95”h Gravitee Panel w/ Two 91.904” S44

94.5”h Gravitee Corner Post w/ Caps Both Ends

14.125”w x 95”h Gravitee Panel

94.5”h Gravitee Corner Post w/ Caps Both Ends

Backwall Assembly

© 2023

Step 2 of 5

Order #XXXXX

Locked layer contains

placeholder marks.

SEG

Graphic

SEG

Graphic

FRONT VIEW

SEG Graphic Installation

Corner A

Corner D

Corner B

Corner C

It is important to first insert

graphic into each alternate

corner, then to the sides of

the frame. If this is not done,

graphic will not fit into the

frame correctly.

Step 1

Insert corner A. Turn edge of

graphic so silicon welt is

perpendicular to face of

graphic. Insert narrow side

of welt with fabric to outside

into the channel. Repeat for

other side of this corner.

Step 2

Repeat Step 1 for opposite

corner C, then insert corner

B, followed by corner D, to

complete the installation of

the corners.

Graphic Removal

To remove the graphic from

the frame, locate the fabric

pull tab. Gently pull up on

the tab to remove the fabric.

Step 3

Once all corners are inserted,

press one silicon edge into

channel from corners and

work toward the center.

Make sure welt is fully inserted

into channel. Continue until

all sides are done. Smooth

out edges of graphic.

Steps:

1) Apply SEG graphics to backwall frames as shown.

When assembled

S

E

G

Gr

ap

h

ic

SEG

Graphic

SEG

Graphic

SEG

Graphic

Backwall Graphics

© 2023

Step 3 of 5

Order #XXXXX

Locked layer contains

placeholder marks.

*

Lock Clip into Groove of

Horizontal Extrusion, then

slide Light onto Clip.

Light Attachment

Slide light into light

receiving hardware

Lock into

groove of

horizontal

FRONT VIEW

Shelf Attachment

Lock Setscrew

Setscrews will face

outward for ease

of assembly

*Insert locks into groove

of vertical extrusion &

tighten setscrews.

Back of Shelf

Steps:

1) Attach shelves to panel [8] through holes in graphic.

See Shelf Attachment detail.

2) Connect lights to top of display where desired.

See Light Attachment detail.

Completed Assembly

8

Shelf

Shelf

Shelf

Shelf

Light

Light Light

***

**

**

**

**

Backwall Attachments

© 2023

Step 4 of 5

Order #XXXXX

1

2

3

4

5

6

7

8

9

9A

10

Door

Door

Back View

*

*

*

*

Back View

Door

Hinge

Hinge

Slide pin into

hinge attached

to vertical.

Slide door

hinge over pin.

Door Connection

*

Pin

Top View

Top View

Top View

door

hinge

Top View

door

hinge

Steps:

1) Assemble Gravitee panels and posts in numerical order, as shown,

making sure Velcro is facing inward. See Gravitee Panel Assembly

sheet, for instruction.

2) Attach horizontal extrusions [9] and [9A] between posts [2] and [7].

3) Attach vertical [10] between horizontals [9] and [9A].

4) Connect doors to posts [1] and [8]. See Door Connection detail.

Item

1

2

3

4

5

6

7

8

9,9A

10

Qty.

1

1

1

1

1

1

1

1

1,1

1

Description

38”h Gravitee Corner Post w/ Door Attachment

14.125”w x 38”h Gravitee Panel Frame

38”h Gravitee Corner Post

19”w x 38”h Gravitee Panel Frame

19”w x 38”h Gravitee Panel Frame

38”h Gravitee Corner Post

14.125”w x 38”h Gravitee Panel Frame

38”h Gravitee Corner Post w/ Door Attachment

37.0945”w Z45 Horizontal Extrusion

34.4173”h Z45 Vertical Extrusion

GOD-1558 Counter Assembly

© 2023

Step 5 of 5

Order #XXXXX

*

Shelf Supports

Shelf

Supports

Completed Assembly

Shelf

7

18

25

18

20

Counter Top

Steps:

1) Wrap SEG Graphic around front and sides of assembled counter.

See SEG Graphic Installation sheet for instruction.

2) Connect shelf supports to Velcro, then place shelf on top of supports.

3) Lock counter top to panels [2] and [7]. See Counter Top Lock detail.

Back View Front View

*

Top View

Align hole with pin Rotate pin. Spring

will push pin into hole.

Counter Top Lock

12

*

Pin

Hole

2

19

Keep connectors [1] [8] extrusions [9] [9A] [10] and doors assembled, when packing.

GOD-1558 Counter Assembly (cont’d)