Cognex DataMan 8600 Series Bedienungsanleitung

DataMan®8600

Quick Reference Guide

8/24/2015

Version 5.4.3

Legal Notices

The software described in this document is furnished under license, and may be used or copied only in accordance with

the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this

document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee.

Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes

no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation.

Cognex Corporation makes no warranties, either express or implied, regarding the described software, its

merchantability, non-infringement or its fitness for any particular purpose.

The information in this document is subject to change without notice and should not be construed as a commitment by

Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or

the associated software.

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document

may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor

transferred to any other media or language without the written permission of Cognex Corporation.

Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as

well as pending U.S. and foreign patents listed on the Cognex web site at: http://www.cognex.com/patents.

The following are registered trademarks of Cognex Corporation:

Cognex, 2DMAX, Advantage, Alignplus, Assemblyplus, CheckitwithChecker, Checker, CognexVisionforIndustry,

CognexVSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, LaserKiller, MVS-8000,

OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,

UltraLight, VisionSolutions, VisionPro, VisionView

The following are trademarks of Cognex Corporation:

The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, CognexVSoC, CVC-1000, FFD, iLearn, In-Sight

(design insignia with cross-hairs), In-Sight2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax,

PatMaxRedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand

Other product and company trademarks identified herein are the trademarks of their respective owners.

Legal Notices

Table of Contents

Legal Notices 2

Table of Contents 3

Symbols 5

Getting Started 6

About DataMan 8600 6

DataMan 8600 Accessories 7

Physical Layout of the Reader 9

Physical Layout of the Base Station 11

DMA-IBASE-01 11

DMA-IBASE-BT-XX 12

Setting Up Your DataMan 8600 13

Overview of Setting Up the Reader 13

Install the DataMan SetupTool 14

DataMan 8600 Imager Specifications 15

DataMan 8600 Specifications 15

DataMan Base Station Specifications 15

Connection Options 16

Connecting a DataMan 8600 Through Ethernet 16

Troubleshooting an Ethernet Connection 17

Connecting a DataMan 8600 Through RS-232 17

Connecting a DataMan 8600 Through USB 19

Using Your Device Through USB 20

Using DataMan 8600 Wireless Readers 21

Connecting to a Wireless DataMan 8600 Through a Base Station 21

Pairing Strategy (DMA-IBASE-BT-XX) 25

Base Station Routing Capabilities 26

Ad-hoc Mode 27

Infrastructure Mode 27

Wireless Reader: Buffering Data 28

Summary of Wireless Buffering Indicators 30

Wireless Reader: Charging 30

Wireless Reader: Changing Batteries 32

Reading Codes with the DataMan 8600 35

Industrial Protocols 35

Trigger Types 36

Field of View and Reading Distances 36

Map of Field of View and Reading Distances 36

Compliance Information, Warnings and Notices 37

Laser Information 37

Agency Compliance Statements 37

Agency Compliance Statements: DataMan Base Station 41

Reader Control Codes 44

Keyboard Language (Corded Readers Only) 44

Table of Contents

Precautions 45

Table of Contents

Symbols

The following symbols indicate safety precautions and supplemental information.

WARNING:This symbol indicates the presence of a hazard that could result in death, serious personal injury or

electrical shock.

CAUTION:This symbol indicates the presence of a hazard that could result in property damage.

Note: Notes provide supplemental information about a subject.

Tip: Tips provide helpful suggestions and shortcuts that may not otherwise be apparent.

Symbols

Getting Started

This section provides general information about the DataMan 8600 readers and the DataMan 8000 series base stations.

You can also find information on the DataMan 8600 accessories and the physical layout of the reader and the base

stations in this section.

About DataMan 8600

The DataMan 8600 readers offer the industry’s most advanced technology for reading 1D and 2D codes regardless of

size, quality, printing method or surface, and belong to the only industrial handheld ID reader family that offers Industrial

Ethernet communication. DataMan 8600 is available with patented 1DMax+ with Hotbars, class-leading 2-D algorithms

and future-proof modular communication slide-ins.

The DataMan 8600 readers use Cognex’s patented UltraLight® technology and 2DMax+ algorithms to read the most

challenging Direct Part Mark barcodes. UltraLight® illumination provides flexible lighting control to create dark field,

bright field and diffuse lighting. Additionally, DataMan 8600 features a tuning button for easy configuration and extended

read attempts.

The DataMan 8600 readers are available with the following communication options:

lEthernet

lUSB

lRS-232

lBluetooth

lWiFi

An intelligent base station is also provided when the DataMan 8600 reader uses the wireless (Bluetooth or WiFi)

communication module. The base station acts as a router between the reader and your computer or network.

Infrastructure Mode does not use the base station for communication. (See Infrastructure Mode.)

Getting Started

Note: Henceforward, the term ‘wireless’ refers in this document to the WiFi or to the Bluetooth communication

module of the reader.

The DataMan 8000 series base stations are available with the following communication options:

Base Station Communication Wireless Protocol

Ethernet with

Industrial

Protocols

USB RS-232 Bluetooth WiFi

DMA-CBASE-01 √

DMA-IBASE-BT-01 √ √ √

DMA-IBASE-BT-02 √ √ √ √

DMA-IBASE-01 √ √ √ √

DataMan 8600 Accessories

Serial/USB slide-in

DMCM-SERIALM-00

Ethernet slide-in

DMCM-ENETM-00

Bluetooth slide-in

DMCM-BTM-00

Wireless slide-in

DMCM-WLESSM-00

Charging Base Station

DMA-CBASE-01

Intelligent Bluetooth Base Station

DMA-IBASE-BT-01

Intelligent Bluetooth Base Station

DMA-IBASE-BT-02

Intelligent Base Station

DMA-IBASE-01

Power Supply for base station

DMA-24VPWR-xx

Power Supply for reader

DM100-PWR-00

Battery for the wireless reader

DMA-HHBATTERY-01

Multi-Battery Charger

DMA-MBC-xx

POE Adapter

CPS-24V-POE1

POE Adapter

CPS-24V-POE4

Getting Started

Wall Mount

DMA-WALL-8000-00

Wall Mount for Base Station

DMA-IBASE-WALL-00

POE Adapter

CPS-AC-POE1A-xx

Stand

DM-STAND-00

Rubber sleeve

DM8000-SLEEVE-00

DataMan 8600 Reader Cables

RS-232 coiled cable for reader,

2.5 m

DM8000-RS232-02

RS-232 coiled cable for reader, 5

DM8000-RS232-05

RS-232 industrial cable for reader,

2.5 m

DM8000-RS232IND-02

USB cable, 2.5 m

DM8500-USB-00

USB coiled cable, 2.5 m

DM8500-USBC-02

Ethernet Coiled cable, 5m

DM8000-ECABLEC-05*

Ethernet cable, 2.5 m

DM8000-ECABLE-02

Ethernet cable, 5 m

DM8000-ECABLE-05

Ethernet cable, 30 m

DM8000-ECABLE-30

* Collimated cable length including DM8000-ECABLE-X should not exceed 50 m.

DataMan Base Station Cables

RJ25 (RJ12) to DSUB9 cable for base station, 5 m

DMA-RS232RJ-05

lUSB cable for base station: Use any standard USB-A to USB-B 2.0 cable up to 3 meters.

lEthernet cable for base station: Use any standard CAT5/5e, SF/FTP or S/FTP cable.

lDMA-USB-00: Straight 10ft USB cable.

Getting Started

Physical Layout of the Reader

WARNING:LASER LIGHT, DO NOT STARE INTO BEAM

1 UltraLight

2 Laser aimer

3 Trigger (press and hold to read)

4 Communication module insertion point

5 Indicator light

6 Lanyard hook

7 Extended Read Attempts button

The Extended Read Attempts button of the DataMan 8600 acts as an optical button to arm the reader for predefined

actions.

Getting Started

Andere Handbücher für DataMan 8600 Series

Inhaltsverzeichnis

Andere Cognex Barcode-Lesegerät Handbücher

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DM260Q Bedienungsanleitung

Cognex

Cognex DataMan 7550 Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DataMan 50 Series Bedienungsanleitung

Cognex

Cognex DataMan 8700 Bedienungsanleitung

Cognex

Cognex DataMan 50 Bedienungsanleitung

Cognex

Cognex DataMan 360 Series Bedienungsanleitung

Cognex

Cognex DataMan 260 Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 8600 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Bedienungsanleitung

Cognex

Cognex DM8072 ER Bedienungsanleitung

Cognex

Cognex DataMan 70 Bedienungsanleitung

Cognex

Cognex MX-1000 Bedienungsanleitung

Cognex

Cognex DataMan 302L Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 260 Series Bedienungsanleitung

Cognex

Cognex DataMan 8700 DX Bedienungsanleitung

Cognex

Cognex DataMan 8050 Bedienungsanleitung

Cognex

Cognex DataMan DM474 Bedienungsanleitung

Cognex

Cognex DataMan DT150 Bedienungsanleitung

Cognex

Cognex In-Sight 2800 Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung