CrimeStopper EZEE Start EZ-1 Bedienungsanleitung

EZ-1

ONEBUTTONREMOTESTART SYSTEM

OPERATINGINSTRUCTIONS

CONGRATULATIONS on your choiceofaCoolStart™RemoteEngine Starter and Keyless EntrywithDP

TechnologybyCrimestopperSecurityProductsInc. Thisbookletcontainstheinformationnecessaryforoperating

your system. If anyquestionsarise, contact your installation dealer or Crimestopper SecurityProductsInc.

*IMPORTANTINFORMATION:Primaryand Optional Features

-PRIMARY: Theseare featuresthatmustbe connected inorder for the systemtooperateproperlyi.e. Remote

Startconnections,Flashing lights,and BrakeReset. For programming,the hood pinand programbutton are

required.

-OPTIONAL: Thesefeaturesaretobeconnectedonlyifdesiredoragreeduponbythecustomerandtheinstalling

dealer i.e.Door Locks,TrunkPop,DomeLightIllumination,Horn-Honk,Anti-Grind,etc.Thesefeaturesmayalso

require additionalpartsand/or labor fees.Consultwithyour installer beforehand tobe sure ofwhatisgoing tobe

installed withyour particular system.

CRIMESTOPPERSECURITYPRODUCTS, INC.

1770 S. TAPO STREET, SIMIVALLEY, CA. 93063

REV 09-2008

ThisdevicecomplieswithFCC Rulespart15.Operation is

subjecttothe following twoconditions: 1)Thisdevicemaynot

causeinterference,and (2)thisdevicemustacceptany

interferencethatmaybe received,including interferencethat

maycauseundesired operation.The manufacturerisnot

responsibleforanyradioorTVinterferencecaused by

unauthorized modification tothisequipment. Suchmodification

couldvoidthe user'sauthoritytooperatethe equipment.

TABLEOF CONTENTS

Operation Cautions&Warnings…….……………..….…………………………………….…………….….…………2

Using the RemoteTransmitter………………………………………………………………………….………....…….3

StatusLED……………………………………………………………………………………………….……….……….4

RemoteEngine Control…………….…..……………………………………………………………….…….……….4-7

Turbo Timer Mode……………………………….……………………………………...……………….…………..…8-9

Convenienceand SafetyFeatures……………………………….………………………………….…...……..…10-11

Valet ServiceMode.…………………………………….………………...…………………………………….………11

Transmitter Programming….…………….…………………………………………….……………….…………....…12

NoFactoryKeyless Entryafter RemoteStart…………..…………………………………………………………….13

RemoteStart Diagnostics……………………………………………………………………………………………….13

BatteryReplacement.…………………………………….………………...……………………..…………….………14

2-WayDataPort…………………………………………………………………………………………………………15

OPERATIONCAUTIONS&WARNINGS

CRIMESTOPPERSECURITYPRODUCTS,INC. and its VENDORS shall notbe liablefor anyaccidentresulting

fromthe useofthisequipment. Thissystemisdesigned tobe professionallyinstalled intoacarorvehicleinwhich

all items,suchasparking brakeand all associated components,door switches,transmission shift linkage,throttle

linkage, and all engine safetyfeatures, are inperfect working condition.

DONOTinstall theRemote EngineStarting Systemon MANUALTRANSMISSIONvehicles.Ifaccidentallyleft

ingear the vehiclecouldbecomeaself-propelled threat tolifeand property.

ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO: A)Understand the operation ofthissystem

and itssafetyfeatures.B)Check for proper operation ofthe systemprior toaccepting deliveryofthe vehiclefrom

the installation facility.C)Check and maintainthe condition ofthe vehicleand all itemsrelativetothe proper

operation ofthissystemand itssafetyfeatures.D)Always leavethe doorsand windowsclosed and locked to

protect against accidentsand theft.

DONOTremote startthevehicleinaclosedgarage. Makesure thatthe garage door isopen or there is

adequateventilation.Failure toobservethisrulecouldresultininjuryordeath frompoisonousCarbonMonoxide

fumes.

USINGTHEREMOTETRANSMITTER

STARTBUTTON

LED

REMOTESTARTBUTTONPRESS SELECTION(Option #6):

The transmitter supplied withthissystemisasinglebutton remotecontrol.

Toeliminatethe possibilityofaccidentallystarting the vehicle,there are (3) optionsforbuttonpressselection.This

option will allowyou tochange whether the RemoteStarter isactivated bya:

1.DoubleButton -½second presses.

2.*Single½second press (Default).

3.Press and Hold2seconds.

*Default=1singlepress*

Please consultyourinstallertochangeprogrammableoptions

STATUSLED

VEHICLESTATUSLED:(Install optional)

The optionalLEDwill remainsolidwhen the systemisinValet Servicemode. The remotestart function WILL

NOToperatewhen inValet Mode. See page #11.

REMOTEENGINECONTROL

REMOTEENGINESTARTING -SUCCESSFULSTART:

1) Press the remotestart button for at least 1/2second (*default). Parking lightsflashonce, return solid,and the

Ignition/Acc circuitsturn on.

2) After afewsecondsthe Starter Motor engages.The parking lightsand Acc circuitswill turn off whilecranking.

3) Engine Startsand Runs. Parking Lightsand Acc turnsbackon, and the doorslock.

4) Engine will remainrunning for programmed run timeuntil resetwithBrakepedal.Ifneeded,the engine can be

turned off withremotetransmitter bypressing and releasing the Start button.

AFTER

IGN

STARTER

THEN

FLASH1X

SOLID

SEC.

REMOTEENGINECONTROL

REMOTEENGINESTARTING -UNSUCCESSFULSTART

Inthe eventthatthe engine doesnotstarton the firstattempt, the systemshutsdownfor afewseconds,then

attemptstorestartthe engine a2nd and 3rd time.Forhardstartingengines,theunitwillallowastartercranktimeof

upto13secondsmaximum.Thisshouldprovideamplecrankingtimefordifficultstarts,butislimitedto13seconds

tohelpprevent damage tothe starter fromover cranking.

1) If engine startson 2nd or 3rd attempt, see steps3&4of "SuccessfulStart"on page 4.

2) IfThird attemptfailstostartengine,the systemwill turn off and doorswill remainlocked.NOFURTHER

ATTEMPTSWILL BE MADEAUTOMATICALLY

TURNING OFF AREMOTESTARTEDENGINE:

1) Engine isrunning inRemoteStart (Parking lightsON).

2) Press and releasethe remotestart button or doublepress (If option #6 ison).

3) Engine &parking lightsOFF, Doorsre-lock.

ENTERING YOUR REMOTESTARTEDVEHICLE:

1) Withengine running, Unlocksystemwithremote(If equipped) or open door withkey.

2) Enter vehicleand be carefulnot tostep on brakepedal!(RemoteStart Reset)

3) Turn Ignition toON/RUN position, then press brakepedaltoreset the RemoteStarter &Shift out of park.

4) Remotestarter will resetinstantlywhen the brakeispressed.Parking lightswill turn off and the ignition keyis

nowcontrolling your vehicle.

REMOTESTART RUN TIMERESET:

You can nowreset the engine-run timer toallowfor more running timeafter remotestart hasalreadyoccurred

using the remotecontrol. After asuccessfulremotestart, press boththe Lock&Unlockbuttonstogether for at

least 2seconds. The parking lightswill flash3timesand internalengine timer will reset backtozero minutes.

REMOTEENGINECONTROL

IDLEDOWNMODE:

Thismodeallowstheunittotakeoveroperationoftheparkedvehiclewhiletheignitionkeyisremovedandyouexit

the vehicle.The vehicleisputintoaremoterunning condition before you exitand itwill remainrunning for the

programmed run timeor until you comeback.

Examples:

•You pull up toaconveniencestore for aquick stop,"IdleDown"mode keepsengine running when you exitthe

vehicle,(withkeysinhand)remotelockdoorsorarmalarm.Whenyoureturn,unlock,turnignitionONanddrive

away.

IDLEDOWNMODE-EXITING THEVEHICLE:

1) Withvehicleengine running withkey, press the RemoteStart button for at least one second or twiceif set for

Doublepress.

2) Parking Lightswill turn ON.

3) Doorswill unlock, or if brakepedalisbeing depressed, doorswill unlockwhen it isreleased.

4) Turn OFF Ignition and removekey. Engine shouldremainrunning.

5) Engine will remainrunning for programmed run timeor until you return (whichever comesfirst).

IGN

SOLID

OFF

UNLOCK

REMOTEENGINECONTROL

INFINITYRUN MODE

Thismode can onlybe activated with"IdleDown"procedure.The InfinityRun mode allowsthe vehicleengine to

remainrunning INDEFINITELYafter the programmed run timeelapses.Thismode will allowthe vehicletobe left

running and unattended without the ignition keyinthe switchpreventing the vehiclefrombeing stolen.Thismode

canbebeneficialtolawenforcementorcommercialtrucksthatneedtoremainrunningunattendedforlongperiods

of time.

INFINITYRUN MODE–EXITING THEVEHICLE:

1) Withvehicleengine running withthe key,press the RemoteStartbutton for atleast1second,pauseafew

seconds, then press and releasethe remotestart button asecond time.

2) Parking Lightswill start flashing, and doorswill unlock.

3) Turn Ignition switchOFF, removekeyand exit the vehicle. Engine shouldremainrunning.

4) Thevehicle’sparkinglightswillflashfortheprogrammedruntimeof12,24,or36,or48minutesandthenswitch

tosolidwhilemotor runsindefinitelyor until fuelsupplyrunsout.

SELECTABLEHOURLYCOLD-STARTMODE(1-4 HOURS)

Thismode allowsthe vehicletobe programmed toself-startevery1,2,3or 4hoursand run for the programmed

run time. Thiscan be helpfulduring extremelycoldconditionswhere engine fluidfreeze-up isaconcern.

THEVEHICLEMUSTBEOUTDOORSORINAWELL VENTILATEDAREA! Oncethismodeisset,theunitwill

startatthe programmed hourlyintervaland run for the programmed run time.Toresetthismode,either startthe

vehiclewiththe keyor the remotecontrol.

SELECTABLEHOURLYCOLD-STARTMODE–EXITING THEVEHICLE:

1) Engine shouldbe running withthe Key.Press the RemoteStartbutton for atleast1second.Lightswill turn on

signaling the remotestart hasturned on and doorswill unlock.

2) Within10 secondspress and releasethe valet/programbutton oncefor eachhourlyincrement(1 time=1hour,

2X=2hours, 3X=every3hours, 4X=every4hours).

3) Parking Lightswill turn ONwhen the button ispressed and flashoncefor eachconsecutivebutton press.

4) Turn Ignition switchOFF, removekeyand exit the vehicle. Engine shouldremainrunning.

5) Onceoutside the vehicle,press and releasethe remotestartbutton toturn off engine.The parking lightswill

flashthe number of timesindicating the hourlyincrement for confirmation. The vehiclewill startbyitselfatthe

selected hourlyincrement until driven withkeyor started viathe remotecontrol.

TURBOTIMERMODE(OPTION#22)

The optionalTurbo Timer mode allowsthe CoolStartsystemtokeep aTurbo or Turbo Dieselvehiclerunning for 1

to5minutes[selectively]after you removethe keyand exitthe vehicle.Thisishandyfor turbo cool-downwithout

the need forexpensiveturbotimers.Thismoderequirestheuseofanextrapartcalledamomentaryswitch/button

that isnot included withthe kit. There are (3) modesof operation for the Turbo Timer Mode

1. Brake PedalSet Mode.Withthe engine running bykey, press Remote StartButton withbrake pedal

depressed. Asyou releasethe brakepedal,the Parking Lightsand StatusLEDwill blinkthe number of

minutesfor the Turbo Timer setting. The doorsunlockafter confirmation. The run timecan be changed by

using the pushbutton switchattached tothe green start activation wire (see AlwaysSet Mode).

2. Always Set Mode(default). The Turbo Timer Run Timemust alwaysbe set. Withbrakepedaldepressed

and engine running bykey,Press the “Turbo Timer” button 1to5timesfor eachminuteofrun timeyou

desire.(1 press =1min.)Asyou releasethe brakepedal,your systemwill confirmbyflashing the lightsthe

samenumberoftimesthebuttonwaspressed.Thedoorsunlockafterconfirmation.TurnIgnitionswitchOFF,

removekeyand exit the vehicle.

3. IdleDownMode. Thisreplacesthe normalIdleDownMode.Can’tuseInfinityRun or ManualTransmission

Modewiththisoption.Withtheenginerunning bykey,press theRemoteStartButton. TheParkingLights

and StatusLEDwill blinkthe number ofminutesfor the Turbo Timer setting.The doorsunlockafter

confirmation.The run timecan be changed byusing the pushbutton switchattached tothe green start

activation wire (see AlwaysSet Mode).

Note: Mode 1and 3,the run timer (1 to5min.)isset one time. The systemalwaysremembersthe Turbo Timer

setting even withbatterydisconnection.

SETTINGTHETURBOTIMERRUN TIME

REMOVEKEY

PRESS TURBO

FLASH1-5X

EXITVEH.

PRESS

AND HOLD

BRAKE

TIMERBUTTON

1-5TIMES

RUNNING RELEASE

BRAKE

LIGHTS

RUNNING

REMAIN

1-5 MIN.

CONVENIENCEAND SAFETYFEATURES

KEYLESS ENTRY(POWER DOOR LOCK CONTROL, Optional)

Thissystem enables youto remotelylock andunlock thevehicle’s doors (ifequipped withpower locks) viaremote control

for safety andconvenience. Note: This feature may require extra labor and/or parts to install. Press the Lock or Unlock

transmitter buttonas youleave or come near thevehicle. Parkinglights will flashonce for lock andtwice for unlock. If

vehicle is running by the remote start system, the lights will flash, but returnback to solid.

AUTO LOCK/UNLOCK (Option # 2)

TheAuto Lock feature controlswhether thedoors will automaticallylock/unlock onyourvehiclewhendrivingorwithturning

theIgnitionON/OFF. If theAuto Lock feature isturned on,andyoursystem isin“Tach”mode, thenthedoors should

automaticallylock as theengineRPM’s increase (driving). If theAuto Lock feature isturned on,andyoursystem isin

“Smart Tachless” mode, thenthedoors will lock afew seconds after theIgnitionisturnedon.WhentheAuto Lockfeature is

turned on,thesystem will always unlock thedoors whentheIgnitionisturned off. Withthisfeature turned OFF,thesystem

will not automatically lock or unlock the vehicle. See your installer for programming informationonthis feature.

REMOTE PANIC (Optional)

For personalsafety thisunitnow includes apanicfeature. To soundthevehiclecar horn,press theLock Buttononthe

remote for more than2seconds. Thevehiclehornwill honkalongwithflashingparkinglamps for 1minute. Reset Remote

Panic by pressing either the lock or unlock button. See next sectionfor HornHonk information.

HORN CHIRP/HONK OUTPUT(Option # 7 & 13)

Thisfeature, ifinstalled, will provide 3audibleconfirmation chirps from thefactory horn when aremote start isrequested

using the remote. Note: Hornhonk/chirp feature may require extra labor and/or parts to install.

DOMELIGHTILLUMINATION (Optional)

ThisCoolStart system includes anoutputthat canbe programmed to remotelyilluminate theinterior lightwhenyouunlock

yourvehiclefor lighted entry at night. If yoursystem isprogrammed for Dome Lightillumination,thenitwill work

automaticallylightingthedome lightfor 30 seconds whenyouunlock yourvehicleviatheremote. Thedome lightwill turn

off after 30 seconds, or turningthekey on(whichever comes first). ThetrunkPop or Dome LightIlluminationmay require

extra labor and/or parts to install.

Inhaltsverzeichnis

Andere CrimeStopper Fernstartsystem Handbücher

CrimeStopper

CrimeStopper EZ-45DP/55DP Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8050 Handbuch

CrimeStopper

CrimeStopper CS-830RKE Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-90 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE START EZ-10 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-865RKE II Series Handbuch

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800 Bedienungsanleitung

CrimeStopper

CrimeStopper Pro Start LCPRO-3 Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.III Bedienungsanleitung

CrimeStopper

CrimeStopper RSX-G6 Bedienungsanleitung

CrimeStopper

CrimeStopper SP-500 Bedienungsanleitung

CrimeStopper

CrimeStopper G5 series Betriebsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-777 FM Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.IV Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-3 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1405DP Bedienungsanleitung

CrimeStopper

CrimeStopper SP-400 Systemhandbuch

CrimeStopper

CrimeStopper REVO-1 Series Bedienungsanleitung

CrimeStopper

CrimeStopper REVO-1 Series Bedienungsanleitung

CrimeStopper

CrimeStopper CS-9704 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch