CrimeStopper PS01-G5 Bedienungsanleitung

PS01-G5, PS03-G5, PS04-G5

PS04-G5FM (1-WaySystem)

PS07-G5FM (2-WayPaging System)

REMOTESTARTSYSTEM

OPERATINGINSTRUCTIONS

CONGRATULATIONS on your choiceofaPro Start™RemoteEngine Starter and Keyless EntrywithDP

TechnologybyCrimestopperSecurityProductsInc. Thisbookletcontainstheinformationnecessaryforoperating

your system. If anyquestionsarise, contact your installation dealer or Crimestopper SecurityProductsInc.

ThePS01-G5, PS03-G5&PS04-G5systemcomes with(2)1-way AMremotes

ThePS04-G5FMsystemcomes with(2)1-way FMremotes.

ThePS07-G5FMsystemcomes witha2-Way LCD Pagerand a1-Way FMremote.

OPTIONALFeatures are tobe connected onlyifdesired or agreed upon bythe customer and the installingdealer

i.e.Door Locks,TrunkPop,DomeLightIllumination,Horn-Honk,Anti-Grind,etc.Thesefeaturesmayalsorequire

additionalpartsand/or labor fees.Consultwithyour installer beforehand tobe sure ofwhatisgoing tobe installed

withyour particular system.

CRIMESTOPPERSECURITYPRODUCTS, INC.

1770 S. TAPO STREET, SIMIVALLEY, CA. 93063

REV 07-2014

ThisdevicecomplieswithFCC Rulespart15.Operation is

subjecttothe following twoconditions: 1)Thisdevicemaynot

causeinterference,and (2)thisdevicemustacceptany

interferencethatmaybe received,including interferencethat

maycauseundesired operation.The manufacturerisnot

responsibleforanyradioorTVinterferencecaused by

unauthorized modification tothisequipment. Suchmodification

couldvoidthe user'sauthoritytooperatethe equipment.

TABLEOF CONTENTS

Operation Cautions&Warnings…….……………..….………………………………….…………….….…………2

Using theRemote Control (1, 4and 5button)….……………….……………………….………....………….....3-4

Using the2-Way Pager……………………………………………….……………………….………....…………...5-6

Setting theClock and BeeporVibrate Selection…………………………………………………….……….….6-7

StatusLED………………………………………………………………………………………………..……….….……8

Remote EngineControl…………….…..……………………………………………………………….…….…..…8-11

Turbo TimerMode……………………………….……………………………………...……………….…………..….12

Manual Transmission Mode……………………………….……………………………………...…………………..13

Convenience and Safety Features……………………………….………………………………….…...……....14-15

TransmitterProgramming….…………….…………………………………………….……………….…………16-17

2VehicleOperation.…………………………………….………………...…………………………………….………18

NoFactoryKeyless EntryafterRemote Start…………..………………………………………………………….19

Remote StartDiagnostics……………………………………………………………………………………………..19

2-Way Data Portand SmartPhoneData Port………………………………………………………………………20

Remote BatteryReplacement(1, 4and 5button remote)……...…………………..…………….………….21-23

OPERATIONCAUTIONS&WARNINGS

CRIMESTOPPERSECURITYPRODUCTS,INC. and its VENDORS shall notbe liablefor anyaccidentresulting

fromthe useofthisequipment. Thissystemisdesigned tobe professionallyinstalled intoacarorvehicleinwhich

all items,suchasparking brakeand all associated components,door switches,transmission shift linkage,throttle

linkage, and all engine safetyfeatures, are inperfect working condition.

ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO: A)Understand the operation ofthissystem

and itssafetyfeatures.B)Check for proper operation ofthe systemprior toaccepting deliveryofthe vehiclefrom

the installation facility.C)Check and maintainthe condition ofthe vehicleand all itemsrelativetothe proper

operation ofthissystemand itssafetyfeatures.D)Always leavethe doorsand windowsclosed and locked to

protect against accidentsand theft.

DONOTremote startthevehicleinaclosedgarage. Makesure thatthe garage door isopen or there is

adequateventilation.Failure toobservethisrulecouldresultininjuryordeath frompoisonousCarbonMonoxide

fumes

USINGTHEREMOTECONTROL

PS01-G5 PS03-G5

PS01-G5: The transmitter supplied withthissystemisasinglebutton remotecontrol.

PS03-G5: Thetransmittersuppliedwiththissystemhas4verticalbuttons–Lock,Unlock,VehicleSelectandStart.

Toeliminatethe possibilityofaccidentallystarting the vehicle,there are (3) choicesfor button press selection.

Option #6 will allowyou tochange whether the RemoteStarter isactivated bya:

1.DoublePress –2pressesof Start button.

2.*Single½second press (Default).

3.Press and HoldStart button 2seconds.

*Default=1singlepress Start*

Please consultyourinstallertochangeprogrammableoptions

VEH

USINGTHE5BUTTONREMOTECONTROL

VEH

UNLOCK

START

DISARM/

ARM/

LOCK

TRUNK

VEHICLE

SELECT

REMOTEVALET =LOCK +UNLOCK (4seconds)

Option 27 has3choicesfor RemoteValet.

1.DoublePress.

2.4Second Press (Default).

3.OFF (no RemoteValet).

NOTE:TheVEHbutton canbeusedtokeepremote control fromaccidentallyoperating yourvehicle..

FM1-WAY

VEH1=Green LED

VEH2=Red LED

AUXOutputsthru Data

AUX1=Trunk+Lock

AUX2=Trunk+Unlock

AUX3=Trunk+Start

AUX4=Lock +Start

(Requires CanbusData Module)

AM1-WAY

VEH1=BlueLED

VEH2=Red LED

USINGTHE2-WAYPAGERTRANSMITTER

POWEROFF FUNCTION

Toturn Power ON, press and holdunlockbutton 2seconds.

Toturn Power OFF, press and holdunlockbutton 5seconds.

ValetMode

BatteryLife

SensorWarning

SensorTrigger

TransmitSignal

TrunkOpen

RemoteStarted

Hood Open

DoorOpen

Lock/Unlock

(Arm/Disarm)

Ignition ON

Silentnobeeps

CLOCK/

LCD SCREENICONS

(Small Hammer)

(BigHammer)

Note:

SomeIconsontheLCD displayonlyfunction

ontheComboAlarmwithRemoteStart

LOCK/ARM UNLOCK/ DISARM

(Tools)

RunCountDown

USBCharger

SIDEBUTTONS

TRUNK

VEHICLE

REMOTE

(UnderSideCover)

START

SELECT

RELEASE

AUXOutputsthru Data

AUX1=Trunk+Lock

AUX2=Trunk+Unlock

AUX3=Trunk+Start

AUX4=Lock +Start

Thisremotecan controlup to4AUX

functionsthru datadepending on the

vehicleand datamodule. Thisistypically

used for operating left and right sliding

doors. (Requires CanbusData Module)

USINGTHE2-WAYPAGERTRANSMITTER

The 2-WayLCD Pager remotetransceiver isused tosend and receiveinformation fromthe vehicle. The

ControlModuletransmitsHigh FrequencyFMsignalsfromthe vehicletoyour pager over long distances. Your

range will varydepending on location, terrain, and localRFnoise/interference. Thissystemisnot guaranteed to

page you if you are behind concretewalls, underground, inalarge structure, or inan area withhigh levelsof

electronicinterference. Handlethe pager/remotewithcare. The LCD displayand/or the electronics maybe

damaged if subjected toabuse.

BATTERYCHARGING

The2-WayLCDremotehasabatterychargeindicatorontoprightcornerofdisplay.Thebatteryvoltageaffectsthe

distanceoftheremotecontrol.ThesystemcomeswithastandardMiniUSBchargingcablethatplugsintotheside

of remotecontrol. Toaccess toUSB plug, slide the cover tothe left shownbelow.

SETTINGTHECLOCK (2-WAY- LCD REMOTE)

1.Press VEHButton on the side of the remotecontrol5times.

2.The remotewill beep and the AMorPM displaywill beginflashing.

3.Press the TrunkButton togo tothe next item –AM-PM-Hour-Minutes.

4.Press the Lock Button to Increase time.

5.Press the Unlock Button to decrease time.

6.Press the Start Button to DisableorEnableBeepand Vibration. See next page.

7.Press the VEHButton to Save and ExitSetup orwait 8seconds, the LCD light will turnoff.

USBCharging Port

REMOTEBEEP &VIBRATESELECTION

The LCD pager remoteBEEPS and VIBRATES when it receivesasignalfromthe vehicle. The Beepsand

Vibration are selectable(on/off). Toenter programmode,

1.Press VEHButton on the side of the remotecontrol5times.

2.The remotewill beep and the AMorPM displaywill beginflashing.

3.Press the Start button tochoosethe mode of “Beep ON/OFF &VibrateON/OFF”.

4.Press the VEHButton to Save and ExitSetup orwait 8seconds, the LCD light will turnoff.

Mode 1: Beep ON&VibrateON. RemoteStart Run TimeReminder Beep ON&VibrateON.

Mode 2: Beep ON&VibrateOFF. RemoteStart Run TimeReminder Beep ON&VibrateOFF.

Mode 3: Beep OFF &VibrateON. RemoteStart Run TimeReminder Beep OFF &VibrateON.

Mode 4: Beep OFF &VibrateOFF. RemoteStart Run TimeReminder Beep OFF &VibrateOFF.

Mode 5: Beep ON&VibrateOFF. RemoteStart Run TimeReminder Beep OFF &VibrateOFF.

Mode 6: Beep OFF &VibrateON. RemoteStart Run TimeReminder Beep OFF &VibrateOFF.

STATUSLED

LEDOperation:(Optional, requires Installation ofLED)

LEDwill flashwhen locking your doorswithremote.

LEDwill remainsolidinValet ServiceMode.

REMOTEENGINECONTROL

REMOTESTARTButton Press Selection (Option #6):

Toeliminatethe possibilityofaccidentallystarting the vehicle,there are (3) optionsforbuttonpressselection.This

option allowsyou tochange whether the Remotestarter isactivated bya:

4.Doublebutton -½second presses.

5.*Single½second press (Default).

6.Press and Hold2seconds.

*Default=1singlepress*

REMOTEENGINESTARTING -SUCCESSFULSTART:

1) Press the remotestart button for at least 1/2second (*default). Parking lightsflashonce, return solid,and the

Ignition/Acc circuitsturn on.

2) After afewsecondsthe Starter Motor engages.The parking lightsand Acc circuitswill turn off whilecranking.

3) Engine Startsand Runs. Parking Lightsand Acc turnsbackon, and the doorslock.

4) Engine will remainrunning for programmed run timeuntil resetwithBrakepedal.Ifneeded,the engine can be

turned off withremotetransmitter bypressing and releasing the Start button.

Note:Whenthevehicleremote starts, the2-WayPagerwill displaytheenginerun inplace oftheClock.

AFTER

IGN

STARTER

THEN

FLASH1X

SOLID

SEC.

PRESS START

REMOTEENGINECONTROL

REMOTEENGINESTARTING -UNSUCCESSFULSTART

Inthe eventthatthe engine doesnotstarton the firstattempt, the systemshutsdownfor afewseconds,then

attemptstorestartthe engine a2nd and 3rd time.Forhardstartingengines,theunitwillallowastartercranktimeof

upto4secondsmaximum.Thisshouldprovideamplecrankingtimefordifficultstarts,butislimitedto4secondsto

helpprevent damage tothe starter fromover cranking.

1) If engine startson 2nd or 3rd attempt, see steps4&5of "SuccessfulStart"on page 7.

2) IfThird attemptfailstostartengine,the systemwill turn off and doorswill remainlocked.NOFURTHER

ATTEMPTSWILL BE MADEAUTOMATICALLY

TURNING OFF AREMOTESTARTEDENGINE:

1) Engine isrunning inRemoteStart (Parking lightsON).

2) Press and releasethe remotestart button or doublepress (If option #6 ison).

3) Engine &parking lightsOFF, Doorsre-lock/re-arm.

ENTERING YOUR REMOTESTARTEDVEHICLE:

1) Withengine running, Unlocksystemwithremote(If equipped) or open door withkey.

2) Enter vehicleand be carefulnot tostep on brakepedal!(RemoteStart Reset)

3) Turn Ignition toON/RUN position, then press brakepedaltoreset the RemoteStarter &Shift out of park.

4) Remotestarter will resetinstantlywhen the brakeispressed.Parking lightswill turn off and the ignition keyis

nowcontrolling your vehicle.

REMOTESTART RUN TIMERESET:

The RemoteStart Run Timeisadjustablefrom5to30 minutes(option #20). Somelocalcities

havearun timelimit for unattended vehicle. You can nowreset the engine-run timer toallowfor more running

timeafter remotestart hasalreadyoccurred using the remotecontrol. After asuccessfulremotestart, press

boththe Lock&Unlockbuttonstogether for at least 2seconds. The parking lightswill flash3timesand

internalengine timer will reset backtozero minutes.

LOCK withREMOTESTARTand AfterREMOTESTARTABORT:

Option#8controlswhetherthesystemwillautomaticallylockduringandafteraremoteStartabortortime-out.This

feature can be turned OFF. The default isLockwithRemoteStart.

REMOTEENGINECONTROL

IDLEDOWNMODE:

Thismodeallowstheunittotakeoveroperationoftheparkedvehiclewhiletheignitionkeyisremovedandyouexit

the vehicle.The vehiclewill remainrunning for the programmedtimeoruntilcanceled.TheRunTimechoicesare:

10, 20, 30 minutesor InfinityRun. Default=20 minutes

Examples:

•You pull up toaconveniencestore for aquick stop,“IdleDown”mode keepsengine running when you exitthe

vehicle,(withkeysinhand)remotelockdoors.Whenyoureturn,unlock,turnignitionONanddriveaway.NOTE:

If lock button ispressed twicein“IdleDown”mode, the remotestart will abort.

IDLEDOWNMODE-EXITING THEVEHICLE:

1) Withvehicleengine running withkey, press the RemoteStart button for at least one second or twiceif set for

Doublepress.

2) Parking Lightswill turn ON.

3) Doorswill unlock, or if brakepedalisbeing depressed, doorswill unlockwhen it isreleased.

4) Turn OFF Ignition and removekey. Engine shouldremainrunning.

5) Exit vehicleand remotelockdoorsif desired. Locking doorsa2nd timeabortsremotestart.

6) Engine will remainrunning for programmed run timeor until you return (whichever comesfirst).

IGN

SOLID

OFF

UNLOCK

PRESSSTART

IDLEDOWNINFINITYRUN MODE:

IdleDowncanbeprogrammedforINFINITYRUN.ThisallowsthevehicleenginetoremainrunningINDEFINITELY

withouttheignitionkeyintheswitch.Theparkinglightscontinuouslyflashinthismode.Thismodecanbebeneficial

tolawenforcement or commercialtrucksthat need toremainrunning unattended for long periodsof time.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CrimeStopper Fernstartsystem Handbücher

CrimeStopper

CrimeStopper RS-901.II Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1300DP Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-1 Bedienungsanleitung

CrimeStopper

CrimeStopper CoolStart RS900ER Bedienungsanleitung

CrimeStopper

CrimeStopper SP-400 Systemhandbuch

CrimeStopper

CrimeStopper CS-845RKE Series II Handbuch

CrimeStopper

CrimeStopper Ezee Start EZ-90 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-64TW1 Bedienungsanleitung

CrimeStopper

CrimeStopper EZ-777 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-865RKE II Series Handbuch

CrimeStopper

CrimeStopper RS-800.III Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800 Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper REVO-1 Series Bedienungsanleitung

CrimeStopper

CrimeStopper COOL START RS-901 Bedienungsanleitung

CrimeStopper

CrimeStopper Pro Start LCPRO-3 Bedienungsanleitung

CrimeStopper

CrimeStopper EZ-31DP/33DP/34DP Bedienungsanleitung

CrimeStopper

CrimeStopper SP-500 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-45DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-00 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-850 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper cool start RS2-G3 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch