CYP OR-42CD-4K22 Bedienungsanleitung

OR-42CD-4K22

UHD+ 4x2 HDMI Matrix with Analogue out

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 16/03/2020 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 Remote Control (Optional)...................10

6.4 RS-232 Pinout and Defaults.................10

6.5 Serial Commands.....................................11

7. Connection Diagram .......................... 20

8. Specifications...................................... 21

8.1 Technical Specifications ........................21

8.2 Video Specifications................................22

8.3 Audio Specifications...............................24

8.4 Cable Specifications ...............................25

9. Acronyms............................................. 26

1. INTRODUCTION

This 4K UHD+4×2 HDMI Matrix with Audio Output provides the ability

to connect up to four 4K UHD+HDMI sources to up to two 4K UHD+

HDMI displays and freely switch between them. This unit comes with full

support for 4K@60Hz (4:4:4, 8- bit) signals as well as support for 16-bit

Deep Colour, HDR (High Dynamic Range), 3D content, HD audio and other

features defined by the HDMI 2.0 specification.

A high-quality local analogue stereo audio breakout from a selected

HDMI output is also available. Each input’s EDID can be independently set

to use either an internal (1080p@60Hz) or external (sink-copied) EDID. This

unit also provides per-output auto source switching as well as connected

display power control using CEC or RS-232 commands. Control of the unit

is provided via front panel buttons, RS-232, and IR remote.

2. APPLICATIONS

Smart Home Control

Control Centre

Function Room

Product Showroom

Ballroom

3. PACKAGE CONTENTS

1× UHD+4×2 HDMI Matrix with Audio Output

1× 5V/2.6A DC Power Adapter

1× Remote Control (CR-190) (Optional)

2× 3-pin Terminal Block

1× Shockproof Feet (Set of 4)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as media players, video game consoles,

or set-top boxes.

HDMI receiving equipment such as HDTVs, monitors, or audio

amplifiers.

The use of Premium High Speed HDMI cables is highly recommended.

5. FEATURES

HDMI 2.0 and DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

4 HDMI inputs and 2 HDMI outputs

Matrix switching with sequential input selection via front panel

controls or discrete input selection via IR remote and RS-232

Supports up to 4K UHD+(18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Supports 10-bit and 12-bit HDR (High Dynamic Range) input and

output

Supports 16-bit 'Deep Colour' input and output up to 1080p@60Hz

Supports pass-through of many audio formats including 8 channel

LPCM, Bitstream, and HD Bitstream

High-quality DAC provides local analogue stereo audio breakout from

the selected HDMI output (LPCM 2.0 sources only)

Per-input EDID management with internal or external EDID options

Per-output selectable auto-switch functionality

Basic display power automation via RS-232 and CEC

Controllable via front-panel buttons, RS-232, and IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1234

POWER

OR-42CD-4K22

AUTO 1234DISPLAY

ON/OFF

DISPLAY AUDIO EDID

SERVICE

AUDIO OUT

OUT

7654321 1098 11

1IR Window: Accepts IR signals from the optional IR remote for control

of this unit only.

2POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

3AUTO A/B LEDs: These LEDs will illuminate to indicate if auto

switching has been enabled on the associated output.

4INPUT 1~4 A/B LEDs: The illuminated LEDs indicate which source is

currently selected for the associated output.

5DISP. A/B LEDs: These LEDs will illuminate to indicate when a valid

sink has been detected on the associated output port. When no sink is

detected the LED will remain off.

6AUDIO A/B LEDs: The illuminated LED indicates which output is

selected as the source for the analogue audio output. If both LEDs are

off, the analogue output is muted.

Note: Only LPCM 2.0 audio sources are supported.

7OUT A/B Buttons: Press these buttons to sequentially switch through

the available inputs for the associated output. Pressing and holding

a button for 3 seconds will enable or disable that output’s auto

switching function.

8DISP. Button: Press this button to turn the connected displays on or

off using CEC or RS-232 commands.

Note: CEC functionality must be enabled on the connected displays. Not

all displays support all CEC commands.

9AUDIO Button: Press this button to sequentially switch the analogue

audio output source between Output A, Output B, and mute.

10 EDID Dipswitch Block: Each dipswitch toggles the EDID source for

the associated HDMI input between external EDID (DOWN), and

internal EDID (UP).

Note: The external EDID defaults to Output A’s EDID. The internal EDID

supports 1080p60 with LPCM 2.0 audio for maximum compatibility.

11 SERVICE Port: This port is reserved for firmware update use only.

6.2 Rear Panel

1 2 3 4 5

1HDMI IN 1~4 Ports: Connect to HDMI source equipment such as

media players, game consoles, or set-top boxes. DVI sources are

supported with the use of an HDMI to DVI adapter.

2HDMI OUT A~B Ports: Connect to HDMI TVs, monitors, or amplifiers

for digital video and audio output.

3AUDIO OUT Port: Connect to powered speakers, headphones, or an

amplifier for analogue stereo audio output.

4RS-232 A 3-pin Terminal Block: Connect directly to a PC, laptop, or

other serial control device with a 3-pin adapter cable to send RS-232

commands to control the unit. Alternatively, connect to an RS-232

controllable display connected to output A to send power on/off

commands to it when the DISP. button is pressed.

RS-232 B 3-pin Terminal Block: Connect to an RS-232 controllable

display connected to output B to send power on/off commands to it

when the DISP. button is pressed.

5DC 5V Port: Plug the 5V DC power adapter into this port and connect

it to an AC wall outlet for power.

6.3 Remote Control (Optional)

1POWER Button: Press this button to

power the unit on or off.

Note: The unit will also transmit the

appropriate CEC/RS-232 on/off commands

to any connected displays.

2OUT A 1~4 Buttons: Press any of these

buttons to immediately switch Output A

to the corresponding input.

3OUT B 1~4 Buttons: Press any of these

buttons to immediately switch Output B

to the corresponding input.

6.4 RS-232 Pinout and Defaults

Serial Port Default Settings

Baud Rate 19200

Data Bits 8

Parity Bits None

Stop Bits 1

Flow Control None

RS-232 Port A (Unit control) RS-232 Port B

RxD

GND

TxD

3-pin

Terminal Block

RxD

GND

TxD

3-pin

Terminal Block

POWER

CR-190

1 2 3 4A

1 2 3 4B

Inhaltsverzeichnis

Andere CYP Matrix-Umschalter Handbücher

CYP

CYP PUV-1210PL-RX Bedienungsanleitung

CYP

CYP nT17BX19 Bedienungsanleitung

CYP

CYP SM-2X4-HDMI-LC Bedienungsanleitung

CYP

CYP CMSI-1616 Bedienungsanleitung

CYP

CYP PUV-44XPL-AVLC Bedienungsanleitung

CYP

CYP PUV-662PL-4K22 Bedienungsanleitung

CYP

CYP PUV-1082-4K22N Bedienungsanleitung

CYP

CYP PU-O4H4C Bedienungsanleitung

CYP

CYP CDPS-44SM Bedienungsanleitung

CYP

CYP CMSI-48E Bedienungsanleitung

CYP

CYP PU-442PL-KIT Bedienungsanleitung

CYP

CYP CPLUS-V4H2HPIP Bedienungsanleitung

CYP

CYP CDPS-44SM Bedienungsanleitung

CYP

CYP CMSI-8H8CVL Bedienungsanleitung

CYP

CYP CMPRO-U8H8CVPL Bedienungsanleitung

CYP

CYP OR-HD88HC Bedienungsanleitung

CYP

CYP PU-O4H4C Bedienungsanleitung

CYP

CYP OR-H44E Bedienungsanleitung

CYP

CYP CMSI-88 Bedienungsanleitung

CYP

CYP PUV-1082-4K22 Bedienungsanleitung

CYP

CYP CMPRO-4H4H Bedienungsanleitung

CYP

CYP PU-8H8HBTE Bedienungsanleitung

CYP

CYP CMPRO-U4H4CVE Bedienungsanleitung

CYP

CYP PU-44XL-KIT Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung