Dover Universal 5588 Series Bedienungsanleitung

0608-001 AKZESO-P

INSTRUCTION

MANUAL Tape Feeder Installation Jig

Tape Feeder Installation Jig

INSTRUCTION MANUAL

Read this instruction manual carefully and keep it at hand.

•Before operating the machine, read these safety instructions

carefully and fully understand them.

•Always keep this instruction manual carefully at hand to refer it

anytime and anywhere.

5588 Series

UIC Manual ID No. 50391934

5588 Series

AKZESO-P

INSTRUCTION MANUAL

Tape Feeder Installation Jig

5588 Series

The instruction manual is compiled especially for the

operations of this unit.

Please read this manual carefully for correct

operations and pay special attention to safety

precautions.

After reading through this manual, please use this

manual as an occasional reference and keep it

within reach.

0608-001

G-S006-06

August, 2006 First Edition

SOM-1944-001

This manual is made of recycled paper.

Before using this manual, please note the following items.

1. The contents of this manual are subject to change for improvement

without prior notice. Please pay attention to the latest information that will

be provided or issued by our company.

2. The copyright of the instruction manual belongs to Universal Instruments

Corporation.

This manual shall not be copied, in whole or part, without written consent

of the publisher.

3. Our company shall not be held to any liability for any damages suffered or

incurred by the end user, arising from any operations other than those

(including the purposes and methods) described in this instruction manual.

Be sure to handle the machine carefully.

4. This instruction manual neither guarantees any license to industrial

property rights, etc., nor grants any license of such rights.

0608-001 AKZESO-P

AKZESO-P0608-001 1

Before Use

We are grateful to you for purchasing our products.

Before using this products, please read this instruction manual carefully to fully understand

the instructions and precautionary measures for safety purposes.

Always keep the instruction manual at hand.

1. The safety precautions are expressed, using the combinations of safety alert symbols

" " and headwords such as "DANGER", "WARNING", or "CAUTION" according to

the degree of danger.

Please fully understand the meaning of each precautionary item for safety purposes.

The safety alert symbols " " are used to indicate a potential personal injury

hazard.

Please pay attention to all safety messages that follow the safety alert symbols to avoid any

possibility of injury or death.

This indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury. This signal

word is limited to the most extreme situations.

A precautionary item identified as " CAUTION" may also lead the operator to

reach a serious result. To avert a serious result, please respect the described

cautions.

This indicates a potentially hazardous situation which, if

not avoided, may result in property damages.

WARNING This indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

CAUTION

DANGER

CAUTION

AKZESO-P0608-001 2

2. Explained in this manual are only the items different from those in the instruction manual

of the main machine.

Use the instruction manual of the main machine together with this manual.

•Identifying Alert Icons

: This symbol mark represents danger or prompts warning.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or instructions.

•Identifying Icons in Manual

This icon shows an important precautionary or a regulatory item.

This icon shows the descriptions for correct operations of the machine.

This icon shows the items to be referred to.

This icon prompts the operator to follow the operational procedures.

Reference

Notice

Note

Contents

Page

3AKZESO-P

Before Use ............................................................................................... 1

Contents ................................................................................................... 3

1. Scope ................................................................................................ 4

1.1 Tape Feeder Installation Jig ........................................................ 4

1.2 Specifications ............................................................................. 5

1.3 Rough View ................................................................................ 6

2. Name and Function of Each Section ................................................ 7

3. Connection with Tape Feeder ........................................................... 8

3.1 Installation of Tape Feeder .......................................................... 9

3.2 Detachment of Tape Feeder ....................................................... 11

4. Troubleshooting ................................................................................ 12

4.1 Power Not Supplied to Tape Feeder ........................................... 12

5. Parts Location ................................................................................... 13

6. Electrical Circuit Diagrams ............................................................... 15

0608-001

4AKZESO-P0608-001

1. Scope

1.1 Tape Feeder Installation Jig

The tape feeder installation jig is a removal base and used to fasten a tape

feeder securely when the tape feeder without splicing is reloaded with

components.

By connecting the tape feeder and the main body of the machine (5588

series) with a cable (prepared for tape feeder connection), power can be

supplied to the tape feeder from the main body, making it possible to singly

load the feeder with components and adjust it.

5AKZESO-P

1.2 Specifications

Table 1

1.2 Specifications

0608-001

6AKZESO-P

1.3 Rough View

Unit: mm

Fig. 1

0608-001

1.3 Rough View

79.5

891

452

120

695

79.5

Tape Feeder Installation Jig

7AKZESO-P

2. Name and Function of Each Section

Fig. 2

[1] Tape Feeder Holding Guide

This guide can be used to securely hold a tape feeder when the feeder

must be adjusted singly.

[2] Tape feeder Fixation Base

A tape feeder can be put on this base.

[3] Tape Feeder Power Connector Socket

This is a DC power output connector for the tape feeder.

[4] Tape Feeder Cable

This cable is used to connect between the tape feeder power connec-

tor and the tape feeder for power supply.

[5] Drawer Connector Holder

This holder is used as both tape feeder cable hook and protector of

the drawer connector.

0608-001

2. Name and Function of Each Section

[1]

[2]

[3]

[5]

[4]

Inhaltsverzeichnis

Andere Dover Industrieanlagen Handbücher

Dover

Dover Civacon LM1051 Leitfaden

Dover

Dover OPW OT Series Technische Daten

Dover

Dover DESTACO TC1 Series Bedienungsanleitung

Dover

Dover WILDEN PSG Equalizer SD Series Bedienungsanleitung

Dover

Dover UIC 5588 Series Bedienungsanleitung

Dover

Dover Destaco Ronohand RP Series Bedienungsanleitung

Dover

Dover Triton 9610 Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RDH Series Bedienungsanleitung

Dover

Dover Automating Tomorrow DESTACO RA Series Bedienungsanleitung

Dover

Dover Ravaglioli VSG J50HE Bedienungsanleitung

Dover

Dover DESTACO RFE Series Bedienungsanleitung

Dover

Dover Triton 9600 Bedienungsanleitung

Dover

Dover OPW CIVACON T196SV-CV Gebrauchsanweisung

Dover

Dover markem-imaje 9400 Series Betriebsanleitung

Dover

Dover Triton 9640 Handbuch

Dover

Dover markem-image 9020 Bedienungsanleitung

Dover

Dover HEIL LIBERTY TP1L-SM-0520 Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RR Series Bedienungsanleitung

Dover

Dover Vitronics Soltec DeltaWave 6622cc Bedienungsanleitung

Dover

Dover OPW SiteSentinel Integra 100 Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RA-Toggle Series Bedienungsanleitung

Dover

Dover OPW 301 Series Bedienungsanleitung

Dover

Dover Hydro TaskMizer 48781 Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RPS Series Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung