Dover UIC 5588 Series Bedienungsanleitung

UIC Manual ID No. 50391921

Read this instruction manual carefully and keep it at hand.

•Before operating the machine, read these safety instructions

carefully and fully understand them.

•Always keep this instruction manual carefully at hand to refer it

anytime and anywhere.

5588 Series

INSTRUCTION MANUAL

Tape Cutting Jig

G-S038-01, 02, 03, 04

Splicing Tape

G-S037-02

Tg1147-PM-SO0511-005

November, 2005 Fifth Edition

November, 2004 First Edition

SOM-1828-005

This manual is made of recycled paper.

This instruction manual is compiled especially for the

splicing procedure.

Please read this manual carefully for correct

operations and pay special attention to safety

precautions.

After reading through this manual, please use this

manual as an occasional reference and keep it

within reach.

5588 Series

INSTRUCTION MANUAL

Tape Cutting Jig

G-S038-01, 02, 03, 04

Splicing Tape

G-S037-02

Before using this manual, please note the following items.

1. The contents of this manual are subject to change for improvement without

prior notice.

Please pay attention to the latest information that will be provided or

issued by our company.

2. The copyright of the instruction manual belongs to Universal Instruments

Corporation.

This manual shall not be copied, in whole or part, without written consent

of the publisher.

3. Our company shall not be held to any liability for any damages suffered or

incurred by the end user, arising from any operations other than those

(including the purposes and methods) described in this instruction manual.

Be sure to handle the machine carefully.

4. This instruction manual neither guarantees any license to industrial

property rights, etc., nor grants any license of such rights.

Tg1147-PM-SO0507-003

Tg1147-PM-SO0507-003 1

Before Use

We are grateful to you for purchasing our products.

This instruction manual describes the functions, handling, and operations of these prod-

ucts for those who have finished the basic training of the chip mounter.

Before operating these products, please read this instruction manual carefully to fully

understand the instructions and precautionary measures for safety purposes.

After reading through this manual, please use this manual as an occasional reference and

keep it within reach.

Tg1147-PM-SO0511-004 2

About the Instruction Manual

First of all, please read the paragraphs in "Caution and Warning" and "Safety Precau-

tions" (first part of this manual).

Identifying Icons in Manual

This icon represents an important precautionary or a regulatory item.

This icon should be identified as an item required for correct operations of the

machine.

This icon prompts the operator to refer to the described item.

This icon prompts the operator to follow the described steps.

Notice

Note

Reference

Procedure

Tg1147-PM-SO

Safety Precautions

0507-003 3

"Safety Precautions" describes the precautionary items that should be kept to prevent

personal injury or property damage beforehand and use these products safely.

Before using these products, please understand the contents of the following

safety precautions.

1. About Safety Precaution Labels

The safety precautions are expressed, using the combinations of safety alert symbols

" " and headwords such as "WARNING", or "CAUTION" according to the degree of

danger.

Please fully understand the meaning of each precautionary item for safety purposes.

The safety alert symbols " " are used to indicate a potential personal injury

hazard.

Please pay attention to all safety messages that follow the safety alert symbols to avoid

any possibility of injury or death.

A precautionary item identified as " CAUTION" may also lead the operator to

reach a serious result. To avert a serious result, please respect the described

cautions.

This indicates a potentially hazardous situation which, if

not avoided, may result in property damages.

CAUTION

WARNING This indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

CAUTION

Tg1147-PM-SO

Safety Precautions

•Identifying Alert Icons

: This symbol mark represents danger or prompts warning.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or instructions.

0507-003 4

Tg1147-PM-SO

Safety Precautions

0507-003 5

2. Common Precautionary Items

Basic Precautions

zOnly a well-trained person should perform the splicing operation.

Do not allow any untrained person to perform the splicing operation.

Mishandling of the operation can cause personal injury.

zBefore performing the splicing operation, please read this instruction manual carefully

for correct operation.

zAfter reading, please keep this instruction manual in a safe place and within reach.

zFollow the instructions in this instruction manual for correct splicing operation.

zBe sure to fully understand the contents of the safety instructions in this instruction

manual and follow these instructions.

zPlease keep to the precautionary items as labeled on the machines (5588 series) or as

described in the instruction manual.

When the precautionary items are ignored, it will result in personal injury or property

damage (damage to the machine).

zDo not use the tape cutting jig except for the splicing operation.

Do not use the tape cutting jig to cut any chip component.

Doing otherwise may cause a chip on a blade or deformation of the pilot pin, which

would result in inaccuracy of tape splicing caused by a tape cutting error and so cause

tape feed error in the tape feeder.

zDo not modify the tape cutting jig or use any parts other than the specified ones.

Doing otherwise may cause personal injury.

zDo not perform any operation other than those described in this instruction manual.

Whenever a problem arises, regarding the machine (5588 series) operation, perfor-

mance, etc., please contact the marketing department Universal Instrument Corpora-

tion for the solution.

Tg1147-PM-SO

Safety Precautions

0507-003 6

Basic Precautions (continued)

zAlthough the precautionary items, on the machine (5588 series) or in this instruction

manual, have been reviewed repeatedly, an incident far beyond any expectation may

occur.

Not only follow the precautionary instructions described in this instruction manual but

also try to perform the splicing operation as carefully as you can at all times.

Be sure to strictly keep the above-mentioned instructions.

Otherwise, wrong operation by the machine as well as personal injury will result.

Tg1147-PM-SO

Safety Precautions

Notes on Machine Operations

0507-003 7

CAUTION

The cutter blade in the tape cutting jig is very sharp, take the

greatest care not to get injured.

Also, take care not to catch your finger in the spring section.

When the tape is to be cut off by using the tape cutting jig, set

the tape on the pilot pins and hold it securely with your thumb

and the forefinger; then cut off the tape slowly and carefully so

as not to cut your finger.

When the tape cutting jig is not to be used, lock it with the lock

lever while the cutter blade is closed, and keep it in a specified

place.

If, because of a chip on the cutter blade in the tape cutting jig, the tape

cannot be cut easily, unusually strong force is required to cut off the

tape, which may cause personal injury.

In such a case, purchase a new tape cutting jig.

WARNING

Only a well-trained person should operate the machine. (5588

series)

Do not allow any untrained person to perform the splicing opera-

tion.

The splicing operation is performed while the machine is run-

ning.

Keep yourself (including all parts of your body and clothing) and

other objects away from any moving mechanism within the area

for the splicing operation.

If there is any problem with the machine, locate the cause and

survey the circumstances.

Turn off the power supply if necessary.

After the problem has been rectified completely, reset the ma-

chine to its normal condition.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dover Industrieanlagen Handbücher

Dover

Dover Triton 9640 Handbuch

Dover

Dover Destaco Robohand RUA Series Bedienungsanleitung

Dover

Dover Destaco Robohand RPL Series Bedienungsanleitung

Dover

Dover Vitronics Soltec DeltaWave 6622cc Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RPW Series Bedienungsanleitung

Dover

Dover MARATHON V-6030 HD Bedienungsanleitung

Dover

Dover markem-image 9020 Bedienungsanleitung

Dover

Dover Destaco Ronohand RP Series Bedienungsanleitung

Dover

Dover Triton 9600 Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND DPP Series Bedienungsanleitung

Dover

Dover Automating Tomorrow DESTACO RA Series Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND RA-Toggle Series Bedienungsanleitung

Dover

Dover OPW DRYLOK 5770 Series Gebrauchsanweisung

Dover

Dover DESTACO ROBOHAND RR Series Bedienungsanleitung

Dover

Dover DESTACO ROBOHAND CH Series Bedienungsanleitung

Dover

Dover WILDEN PSG Equalizer SD Series Bedienungsanleitung

Dover

Dover HEIL LIBERTY TP1L-SM-0520 Bedienungsanleitung

Dover

Dover DESTACO RFE Series Bedienungsanleitung

Dover

Dover DESTACO TC1 Series Bedienungsanleitung

Dover

Dover OPW 301 Series Bedienungsanleitung

Dover

Dover OPW 790 Series Bedienungsanleitung

Dover

Dover TWG PullMaster PM50 Bedienungsanleitung

Dover

Dover OPW CIVACON T196SV-CV Gebrauchsanweisung

Dover

Dover OPW 68EZR Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung