Endress+Hauser Analytik Jena Biometra TAdvanced Bedienungsanleitung

Biometra TAdvanced Quick reference guide 01_20

1Quick reference guide

WARNING

Before initial operation check the correct operating voltage is set on the voltage

selection switch on the underside of the device. Do not open the housing of the device

unless you are authorized to do so. Danger of electric shock!

CAUTION

The sample block and the heated lid can reach high temperatures during operation.

Both the sample block and the heated lid can burn you. The samples are heated up

quickly and may come to an explosive boil. Wear goggles when handling hot samples.

Make sure that the lid is closed securely before starting the program!

NOTICE

The use of oil between samples and sample block is not necessary to achieve an

improved heat exchange. If you wish to use oil, never use silicone oil. Use mineral oil.

Ensure that the ventilation slits are clear. Insufficient ventilation may cause the device

to overheat. Tip: Clean the air inlets on the underside of the device at regular intervals

to ensure optimum airflow.

Important: Release the lid wheel before opening the lid! Adjust the lid wheel for

every individual run!

After the initial self-test, the login screen is displayed:

for Biometra TAdvanced Twin

Press [LOGIN] to log in as an existing user.

Press [QUICK START] for the non-user-specific quick start of programs.

Press [EN/DE/CN] to change the language setting of the login screen.

After login the Biometra TAdvanced home screen opens.

Press [QUICK START] for the user-specific quick start of programs.

Press [PROGRAMS] to edit, save, copy or run programs.

Press [INCUBATE] to incubate the sample block at a constant temperature.

Press [TOOLS] to access the system settings, user management, documentation,

backup tool or self-test functions.

Press [LOGOUT] to log out.

Home screen

Quick reference guide 01_20 Biometra TAdvanced

Home screen for Biometra TAdvanced Mono

for Biometra TAdvanced Twin

Press [PROGRAMS] on the home screen to open the program overview:

To edit a template, press [NEW FROM TEMPLATE], select a template from the list and

press [OPEN TEMPLATE].

To edit a stored program, select a user directory and a program and press [EDIT].

Alternatively, a user or a program can be selected via the quick selection.

The Biometra TAdvanced programming screen opens. Use the following buttons to

toggle between the different programming modes:

Quick selection

Graphical mode

Spreadsheet mode

Gradient mode

Spreadsheet programming screen

Graphical programming screen

Enter a program name. To do this, touch the NAME input field and enter a name

using the Biometra TAdvanced keyboard.

Define the status and the temperature of the heated lid. Touch the HEATED LID input

field and switch the heated lid on or off. If the heated lid is switched on, enter a

temperature between 30°C and 110°C.

To switch the heated lid preheating on or off, press the corresponding button.

Select a program step and press [EDIT]. The screen for editing program steps opens:

Editing, saving and

copying programs

Biometra TAdvanced Quick reference guide 01_20

Use the cursor keys above the keyboard to switch between program steps. The

number of the currently activated step is displayed on a blue background in the

table at the top of the screen.

Touch the TEMPERATURE input field and enter a temperature [°C].

Touch the HOLD TIME input field and enter a time. To program a pause step press .

To program a loop, touch the GO TOinput field and enter the step number to which

the program should return. Then touch the CYCLES input field and enter how often

the loop should be repeated.

To reduce or increase the annealing temperature from step to step within a loop,

press ∆T and set a negative or positive temperature increment.

To reduce or increase the hold time from step to step within a loop, press ∆Tand

set a time increment.

To adjust the heating rate, press ∆R and enter a value between 0.1 °C and max. You

can accept the heating rate for all steps in the program by activating the [APPLY

HEATING/COOLING RATE TO ALL STEPS] checkbox.

To program a gradient, press GRAD. On the next screen you can choose between

standard [STD.] and linear gradient programming [LIN.]. For standard programming

enter a temperature for both the first and last row in the sample block. For linear

programming enter the primer annealing temperature and set a temperature

increment. The gradient curve is displayed. Press ✓to confirm your entries.

Programming of linear gradient at TAdvanced Mono

at TAdvanced Twin

Press ✓on the screen to accept the settings. The software leaves the screen and

opens the spreadsheet or graphical program display.

Alternatively, individual program parameters for a step can be edited. In the

spreadsheet view press directly on the cell in the program table which you want to

edit. In the graphical view press on the desired parameter edit field. Program

options (loops, temperature and time increment, heating and cooling rate) must be

activated using the button to the left of the graphical display.

To insert a program step, select a step and press [INSERT]. In the next screen enter

the desired parameters and confirm the settings by pressing ✓.

For gradient-capable

devices only

Quick reference guide 01_20 Biometra TAdvanced

To delete a program step, select it and press [DELETE].

Incubation at 15 °C rather than 4 °C at the end of a run increases the device's life time.

When all the parameters for all steps have been entered, confirm the settings on

the programming screen with [DONE].

To save the program, select a user directory and a storage location in the next

screen. Then press [SAVE]. The program is now saved.

To copy programs, press [PROGRAMS] on the Biometra TAdvanced home screen.

To copy all programs located in a directory, select a directory and press [COPY ALL].

Select a directory to which the programs should be copied and press [SAVE].

To copy a single program, select a directory and a program and press [COPY]. Select

a directory and a storage location and press [SAVE].

To delete all programs located in a directory, select it and press [DELETE ALL].

Confirm the confirmation prompt.

To delete a single program, select a directory and a program and press [DELETE].

Confirm the confirmation prompt.

The Biometra TAdvanced stores the latest 5 started or edited programs for each

user. To quick start a program, press the [QUICK START] button on the Biometra

TAdvanced home screen. Select a program from the list and press [START].

To start a program from a user directory, press [PROGRAMS] on the Biometra

TAdvanced home screen. Then select a directory and a program and press [START].

After the start the current program is shown in a spreadsheet, graphical or gradient

view. Use the same buttons as in the programming screen to switch between the

different views. The active step is highlighted in yellow (see below).

To pause an active program, press [PAUSE]. The color of the highlighted step

changes to blue and the message PAUSE is shown in the STEP field.

To continue a paused program, press [CONTINUE]. To skip a step, press [SKIP].

To stop an active program, press [STOP PROGRAM] and confirm the prompt.

Programs with a pause in the last step have to be stopped manually as well.

Spreadsheet view

Graphical view

Starting, stopping and

pausing programs

Inhaltsverzeichnis

Andere Endress+Hauser Laborausrüstung Handbücher

Endress+Hauser

Endress+Hauser Analytik Jena APUsim Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP41C Montageanleitung

Endress+Hauser

Endress+Hauser Analytik Jena CyBio SELMA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF39 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Technische Daten

Endress+Hauser

Endress+Hauser Analytik Jena APU 28 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Firmware-Update

Endress+Hauser

Endress+Hauser analytikjena qTOWER Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF48 Handbuch

Endress+Hauser

Endress+Hauser analytikjena Biometra ThermoShaker TSC Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ-M Bedienungsanleitung

Endress+Hauser

Endress+Hauser ISEmax CAM40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena SpeedMill PLUS Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TOne Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF33 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena UVP Minidizer Handbuch

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Analytik Jena TOPwave Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Montageanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TRobot II Handbuch

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung