Endress+Hauser Liquistation CSF33 Bedienungsanleitung

Liquistation CSF33

BA487C/07/EN/14.11

71134634

Valid as of:

Software version 01.02.00

Operating Instructions

Liquistation CSF33

Automatic sampler for liquid media

Operation & settings

Operation concept

a0013353-en

Fig. 1: Pressing the soft key: selecting the menu directly

a0013354-en

Fig. 2: Turning the navigator: moving the cursor in the menu

a0013355-en

Fig. 3: Pressing the navigator: launching a function

a0013356-en

Fig. 4: Turning the navigator: selecting a value (e.g. from a list)

a0013357-en

Fig. 5: Pressing the navigator: accepting the new value

a0013358-en

Fig. 6: Result: new setting is accepted

Endress+Hauser

Liquistation CSF33

Table of contents

1 About this manual . . . . . . . . . . 4

2 General settings . . . . . . . . . . . . 5

2.1 Basic settings . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Date and time . . . . . . . . . . . . . . . . . . . . . . 5

2.3 Automatic hold (optional) . . . . . . . . . . . . . . 6

2.4 Logbooks . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.5 Configuring the sampling depending on the

device version . . . . . . . . . . . . . . . . . . . . . 10

2.6 Extended setup . . . . . . . . . . . . . . . . . . . . 13

3 Inputs . . . . . . . . . . . . . . . . . . . 16

3.1 Binary inputs . . . . . . . . . . . . . . . . . . . . . . 16

3.2 Current inputs . . . . . . . . . . . . . . . . . . . . . 20

4 Programming . . . . . . . . . . . . . 23

4.1 Overview of the possible program types . . 23

4.2 Program type: Basic . . . . . . . . . . . . . . . . . 27

4.3 Program types: Standard and Advanced . . 39

5 Outputs . . . . . . . . . . . . . . . . . 53

5.1 Binary outputs . . . . . . . . . . . . . . . . . . . . . 53

6 Data administration . . . . . . . . 56

6.1 Firmware update . . . . . . . . . . . . . . . . . . . 56

6.2 Saving the setup . . . . . . . . . . . . . . . . . . . . 56

6.3 Loading the setup . . . . . . . . . . . . . . . . . . . 57

Index . . . . . . . . . . . . . . . . . . . 58

About this manual Liquistation CSF33

4Endress+Hauser

1 About this manual

This manual gives a detailed account of all the configuration options in the "Setup" menu.

A description of the following menus is provided here:

• Inputs

– Input configuration

•Outputs

– Output configuration

– Split into separate sections based on the different output types

• Sampling programs

– Creating sampling programs

– Configuring different types of programs

• Additional functions

– Settings for the alarm sensor

– Cleaning program configuration

• Data management

– Firmware updates

– Saving and loading configurations

This manual does not include the following:

• Setup/General settings

--> Operating Instructions BA479C "Commissioning"

• Display/Operation

--> Operating Instructions BA479C "Commissioning"

• Calibration

--> Operating Instructions BA489C "Calibration"

•Diagnostics

--> Operating Instructions BA488C "Maintenance & diagnostics"

• Expert

--> Internal Service Manual

Liquistation CSF33 General settings

Endress+Hauser 5

2 General settings

2.1 Basic settings

2.2 Date and time

Path: Menu/Setup/General settings

Function Options Info

Device tag Customized text, 20 characters Select any name for your controller. Use the TAG name

for example.

Temperature unit Options

•°C

•°F

•K

Factory setting

°C

Alarm delay 0 to 9999 s

Factory setting

0 s

The system only displays the errors that are present

longer than the set delay time. This makes it possible to

suppress error messages that only occur briefly and are

caused by normal process-specific fluctuations.

Path: Menu/Setup/General settings/Date/Time

Function Options Info

Set date Depends on the format Editing mode:

DD (day): 01 to 31

MM (month): 01 to 12

YYYY (year): 2005 to 2100

Set time Depends on the format Editing mode:

hh (hour): 00 to 23 / 0 am to 12 pm

mm (minutes): 00 to 59

ss (seconds): 00 to 59

Extended setup

Date format Options

• DD.MM.YYYY

• YYYY-MM-DD

• MM-DD-YYYY

Factory setting

DD.MM.YYYY

Decide which date format you want to use.

Time format Options

• HH:MM am (12h)

• HH:MM (24h)

• HH:MM:SS (24h)

Factory setting

HH:MM:SS (24h)

Decide whether you want to use the 12-hour or

24-hour clock. Seconds can also be displayed with the

latter version.

General settings Liquistation CSF33

6Endress+Hauser

2.3 Automatic hold (optional)

2.4 Logbooks

Logbooks record the following events:

• Calibration/adjustment events

• Operator events

• Diagnostic events

• Programming events

Here you define how the logbooks should store the data.

In addition, you are also able to define individual data logbooks. Assign the logbook name and select the

measured value to be recorded. The data recording rate (Sample Time) is then the same for all data

logbooks.

Time zone Options

•None

• Choice of 35 time zones

Factory setting

None

If no time is selected, then Greenwich Mean Time

is used (London).

DST Options

•Off

• Europe

•USA

•Manual

Factory setting

Off

The controller adapts the summertime/normal time

changeover automatically if you choose European or

American daylight saving time.

Manual means that you can specify the start and end of

daylight saving time yourself. Here, two additional

submenus are displayed in which you specify the

changeover date and time.

Path: Menu/Setup/General settings/Automatic hold

Function Options Info

Device specific hold

Setup menu Options

• Disabled

•Enabled

Factory setting

Disabled

Decide whether a hold should be output at the current

output when the particular menu is opened.

Diagnostics menu

Calibration menu

Hold delay 0 to 600 s

Factory setting

0 s

The hold is maintained for the duration of the delay

time when you switch to the measuring mode.

Path: Menu/Setup/General settings/Date/Time

Function Options Info

Liquistation CSF33 General settings

Endress+Hauser 7

Path: Menu/Setup/General settings/Logbooks

Function Options Info

Logbook ident Customized text Part of the file name when exporting a logbook.

Event logbook Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Ring buffer

All diagnostic messages are recorded

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Program logbook Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Ring buffer

All diagnostic messages are recorded

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Overflow warnings

Data logbook="Fill up buffer"

Calibration logbook Options

•Off

•On

Factory setting

Off

Decide whether you want to receive a diagnostic

message from the controller in the event of memory

overrun of the logbook in question.

Diagnostic logbook

Configuration logbook

Data logbooks

Scan time 00:00:01 to 01:00:00

Factory setting

00:01:00

Minimum interval between two entries

Format: HH:MM:SS

New You can create a maximum of 8 data logbooks.

Logbook name Customized text, 20 characters

Source of data Options

•None

• Binary input 1

• Binary input 2

• Current input 1

• Current input 2

• Temperature 1

Factory setting

None

Select the input that should be the data source of the

logbook entries.

Measured value Options

Depends on data source

The measured value to be recorded depends on the

selected data source and thus also on the sensor

connected.

General settings Liquistation CSF33

8Endress+Hauser

Add new logbook Action Only if you want to create another data logbook

immediately.

You add a new data logbook at a later data using

New.

Ready Action This allows you to exit the menu New.

"Logbook name" The menu only appears if you have created a new data

logbook.

Source of data Read only This is for information purposes only. If you want to

record another value, delete this logbook and create a

new data logbook.

Measured value

Log time left

Data logbook="Fill up buffer"

Read only Displays the days, hours and minutes remaining until

the logbook is full.

Log size

Data logbook="Ring buffer"

Read only Displays the number of entries remaining until the

logbook is full.

Logbook name Customized text, 20 characters You can change the name here.

Data logbook Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Off

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Overflow warnings

Data logbook="Fill up buffer"

Options

•Off

•On

Factory setting

Off

Decide whether you want to receive a diagnostic

message from the controller in the event of memory

overrun of the logbook in question.

Line plotter Menu to define the graphic display

Axes Options

•Off

•On

Factory setting

Should the axes (x, y) be displayed (On) or not (Off)?

Orientation Options

• Horizontal

• Vertical

Factory setting

Horizontal

Path: Menu/Setup/General settings/Logbooks

Function Options Info

Liquistation CSF33 General settings

Endress+Hauser 9

Example for setting up a new data logbook

1. Menu/Setup/General settings/Logbooks/Data logbooks/Scan time: Specify the interval between

two logbook entries.

2. .../New:

a. Logbook name: Assign a name, e.g. "01".

b. Source of data: Select a data source, e.g. the sensor connected to binary input 1.

c. Measured value: From the sensor signals, select the signal that you want to record.

3. .../Ready: Execute this action.

--> Your new logbook now appears in the list of data logbooks.

4. Select the data logbook with the name "01".

5. Activate the logbook by going to "Data logbook" and specifying Ring buffer or Fill up buffer as the

type of memory.

6. If you selected "Fill up buffer", you can also decide whether you want to receive a diagnostic

message in the event of memory overrun.

7. Depending on the type of memory selected, you receive information about the memory space (for

"Ring buffer") or the time remaining until memory overrun (for "Fill up buffer").

8. Define the graphic display mode in the "Line plotter" submenu.

X-Description Options

•Off

•On

Factory setting

Decide whether a description should be displayed for

the axes and whether grids should be shown. In

addition, you can also decide whether a pitch should be

displayed.

Y-Description

Grids

Pitches

X Pitch/Grid distance 10 ... 50%

Factory setting

10 %

Specify the pitch.

Y Pitch/Grid distance

Path: Menu/Setup/General settings/Logbooks

Function Options Info

General settings Liquistation CSF33

10 Endress+Hauser

2.5 Configuring the sampling depending on the device version

The list of functions displayed depends on the device version selected. Functions marked 1) are

available in device versions with a vacuum pump. Functions marked 2) are available

in device versions with a peristaltic pump. Functions marked 3) are available in device versions

with a distributor plate.

Path: Menu/Setup/General settings

Function Options Info

Sampling

Number of bottles Choice of all possible bottle com-

binations

The bottle configuration you ordered is preset in the

device.

Bottle volume 0 to 100000 ml

Factory setting

1000 ml

Set the bottle volume.

Distribution reference 3) Options

• Pre sampling

• Pre bottle change

•Preprogramstart

Factory setting

Pre sampling

The distributor arm goes through a reference point

depending on the option selected.

Power failure Options

• Resume program

• Stop program

Factory setting

Stop program

Decide how the sampler should react when it is

energized after a power failure.

Sample retries 0 to 3

Factory setting

If sampling is started and no sample is drawn in, samp-

ling can be repeated up to 3 times.

Sampling delay 0 to 99 s

Factory setting

0 s

The start of the sampling cycle can be delayed by up to

99 s. The binary output is switched without any delay.

Liquid detection 1) Options

•Automatic

•Semiautomatic

Factory setting

Automatic

If "Semiautomatic" is selected, the purge times and

intake times can be defined separately.

Dosing volume 1) 20 to 350 ml

Factory setting

200 ml

Adjust the dosing tube in the dosing chamber to change

the dosing volume. The level in the bottle is calculated

using the set dosing volume.

Dosing chamber 1) Options

• Dose without pressure (A)

• Dose with pressure (B)

Factory setting

Dose without pressure (A)

Dosing with pressure e.g. in conditions with low

suction heights and slight counterpressure or low

volumes.

Andere Handbücher für Liquistation CSF33

Inhaltsverzeichnis

Andere Endress+Hauser Laborausrüstung Handbücher

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Chemoclean CYR10B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Technische Daten

Endress+Hauser

Endress+Hauser Analytik Jena TOPwave Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TRobot II Handbuch

Endress+Hauser

Endress+Hauser StamoSens CNM 750 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena SpeedMill PLUS Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena qTOWER iris Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena qTOWER3auto Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF34 Technische Daten

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced 96 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CPY7 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena APU 28 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena APU 28 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TRIO Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Analytik Jena UVP Transilluminator Bedienungsanleitung

Endress+Hauser

Endress+Hauser ASP Station 2000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser OXY5500 QF Firmware-Update

Endress+Hauser

Endress+Hauser Liquistation CSF39 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena UVP DigiDoc-It Leitfaden

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung