Ergotron Neo-Flex Bedienungsanleitung

888-24-075-W-01 rev. J • 02/14

1/19

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド:日本語

用户指南 : 汉语

Neo-Flex™ WideView WorkSpace

ENGLISH

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

888-24-075-W-01 rev. J • 02/14

2/19

WARNING

DO NOT load Cart below minimum or above

maximum weight capacities. DO NOT mount a

display larger than the recommended size.

Failure to comply with warning may result in

Cart instability leading to equipment damage or

personal injury.

Min. 11 lbs (5 kg)

Max. 46 lbs (20.9 kg)

Min. 14 lbs (6.35 kg)

Max. 49 lbs (22.2 kg)

WARNING

Impact Hazard!

Moving Parts can Crush and Cut.

Minimize Lift Tension BEFORE

Removing Mounted Equipment.

To Minimize Lift Tension

1. Lower worksurface to lowest position.

2. Turn adjustment nut at top of riser

counterclockwise until it stops (may require

40-60 turns to minimize lift tension).

3. After removing or adding equipment adjust

lift tension to compensate for weight

of new load.

Failure to heed this warning may result in

serious personal injury or property damage!

14mm

9/16”



WARNING

A primary mechanism within the Cart

is under tension and can be

hazardous to people exposed to it

under certain conditions.

DO NOT open the Cart tower or base.

DO NOT attempt to service the Cart.

DO NOT remove safety guards or

labels designed to protect or inform

of possible hazards.

Only Ergotron-approved installers

may service or otherwise modify

Cart. Failure to heed this Warning

may result in serious Personal Injury

and Damage both to the cart and

equipment.

STORED ENERGY HAZARD!

DO NOT OPEN TOWER OR BASE.

DO NO REMOVE SAFETY GUARD.

240-027-00

TIPPING HAZARD!

DO NOT allow children to climb on Cart.

DO NOT route electric cords or equipment

cables within reach of children.

LOCK CASTERS when Cart is stationary.

DO NOT move Cart with Display in highest

position.

DO NOT move Cart over cords or uneven, dirty,

soft or sloping surfaces.

DO NOT move Cart by pushing on Display.

Failure to comply with this warning may result

in Cart instability leading to equipment

damage or personal injury.

WARNING

TO MOVE CART

1. Push Display down to lowest position.

2. Disconnect power cord and secure to Cart.

Unlock casters; point casters in direction of travel.

4. Use rear handle to push Cart.

ENGLISH

Safety

888-24-075-W-01 rev. J • 02/14

3/19

12"-18"

(305-457 mm)

3"- 8.5"

(76-216 mm)

<40 lbs. ( 18.1 kg)

20"

(50.8 cm)

20"

(50.8 cm)

16 - 30 lbs

(7.3 - 13.6 kg)

20˚*

10˚*

90˚

*±5˚

ENGLISH

Features & Speciﬁcations

CAUTION: DO NOT EXCEED

MAXIMUM LISTED WEIGHT

CAPACITY. SERIOUS INJURY

OR PROPERTY DAMAGE MAY

OCCUR!

CPU Holder

Stand

Sit

Important! You will need to adjust this product after installation is complete. Make sure all your equipment

is properly installed on the product before attempting adjustments. This product should move smoothly

and easily through the full range of motion and stay where you set it. If movements are too easy or

difﬁcult or if product does not stay in desired positions, follow the adjustment instructions to create

smooth and easy movements. Depending on your product and the adjustment, it may take many turns to

notice a difference.Any time equipment is added or removed from this product, resulting in a change in

the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum

operation.

888-24-075-W-01 rev. J • 02/14

4/19

AB C D E F

14mm (9/16")

19mm

(3/4")

>9" (229 mm)

8mm

(5/16")

M4 x 12mm

3mm

1x 1x

2x 4x

M5 x 18mm

1x 1x

1x 2x 2x

M5 x 10mm

M5 x 8mm

1x 4x 1x

M3 x 6mm

M6 x 14mm

M6x33mm

4x 4x 4x 4x

M5 x 12mm M5 x 20mm

M5 x 7mm M6 x 12mm

ENGLISH

Components

Tools Needed

CPU Holder

5-sided Security Wrench

Security Screw

Mounting Holes

M8M5 Converter

888-24-075-W-01 rev. J • 02/14

5/19

3mm

efg

1180˚

19mm

(3/4")

ENGLISH

5-sided Security Wrench

CPU Holder NOTE: If you are not attaching a CPU to your

cart, skip step 2 and proceed to step 3.

888-24-075-W-01 rev. J • 02/14

6/19

3mm

ENGLISH

5-sided Security Wrench

Caution: Do Not over tighten fasteners.

NOTE: Position at bottom of tower.

Do not tighten at this time.

Tipping Hazzard: Position bracket so that CPU

attaches as low as possible on the tower.

888-24-075-W-01 rev. J • 02/14

7/19

M5 x 18mm

ENGLISH

5-sided Security Wrench

Security Screw

888-24-075-W-01 rev. J • 02/14

8/19

ENGLISH

Mounting Holes

888-24-075-W-01 rev. J • 02/14

9/19

4abcd

M5 x 10mm

iiiii

ENGLISH

888-24-075-W-01 rev. J • 02/14

10/19

5abc

egf

>9" (229 mm)

M6x33mm

ENGLISH

Andere Handbücher für Neo-Flex

Inhaltsverzeichnis

Andere Ergotron Inneneinrichtung Handbücher

Ergotron

Ergotron Neo-Flex Notebook Lift Stand Bedienungsanleitung

Ergotron

Ergotron Projector Shelf for TeachWell Bedienungsanleitung

Ergotron

Ergotron WORKFIT Standing Desk Converter Bedienungsanleitung

Ergotron

Ergotron LearnFit 24-756-003 Bedienungsanleitung

Ergotron

Ergotron Zido 2-drawer Enclosure Bedienungsanleitung

Ergotron

Ergotron WORKFIT-DL Bedienungsanleitung

Ergotron

Ergotron Modesty Panel Bedienungsanleitung

Ergotron

Ergotron WorkFit-D Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron 48" Bench II Bedienungsanleitung

Ergotron

Ergotron 72” AnthroBench II Bedienungsanleitung

Ergotron

Ergotron Zido Handle Bedienungsanleitung

Ergotron

Ergotron WorkFit-TLE Bedienungsanleitung

Ergotron

Ergotron WorkFit-A, Single LCD Mount, LD Bedienungsanleitung

Ergotron

Ergotron Carl's Table CT15 Bedienungsanleitung

Ergotron

Ergotron WORKFIT Bedienungsanleitung

Ergotron

Ergotron Bench II Bedienungsanleitung

Ergotron

Ergotron Glide Upgrade Bedienungsanleitung

Ergotron

Ergotron LearnFit SE Fehlerbehebungshandbuch

Ergotron

Ergotron 97-540-053 Bedienungsanleitung

Ergotron

Ergotron JUV Bedienungsanleitung

Ergotron

Ergotron StyleView SV44 Bedienungsanleitung

Ergotron

Ergotron ZAH25CG/CG4 Bedienungsanleitung

Ergotron

Ergotron LearnFit 24-481-003 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung