Ergotron Zido 2-drawer Enclosure Bedienungsanleitung

1 of 4

300-5522-00 rev. B • 06/16

Zido® 2-drawer Enclosure

Built with Anthro-DNA™

NOTE: The Zido cart is not included.

Product Part#

Zido 2-drawer Enclosure ZDE02SB/CG

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

2 of 4

300-5522-00 rev. B • 06/16

Product Quantity Part Number

01 Drawer Body 1 835-539X-00

02 Upper Drawer Body 1 835-5236-00

03 Lower Drawer Body 1 835-5397-00

04 Enclosure Brackets 2 225-2732-00

05 Self-threading Screws 8 325-5464-00

06 Nylock Nuts 8 325-5259-00

07 Lock Assembly 1 325-5074-00

THIS IS A 2-PERSON

JOB!

Grab a buddy!

TOOLS

A 7/16" nutdriver or socket is use-

ful for this assembly.

PARTS LIST

Before beginning assembly of your drawer enclosure,

please review the parts list to verify that your shipment is

complete.

3 of 4

300-5522-00 rev. B • 06/16

Self-threading Screw

325-5464-00

1/4-20 Nylock Nuts

325-5259-00

Drawer Tabs

Lock

Nut

Cam

Screw

STEP 1

Remove the Drawers; Install the Lock

Pull the drawer all the way out. Locate the drawer tabs on the glides

on each side of the drawer body. Depress the drawer tabs (one goes

up and one goes down) to release the drawer from the glides. Slide the

drawer o the glides and set aside.

Repeat for the lower drawer.

Install the lock into the lower drawer. Insert the lock cylinder inside the

lock body, then slide that assembly through the hole at the front of the

drawer body. Attach the lock assembly to the lower drawer using the

Nut. Make sure that the key is horizontal in the lock when the assembly

is attached to the drawer. Locate the straight Cam in the kit. Slip the

camp over the end of the lock and secure all the pieces with the screw

using a Phlilips screwdriver. Make sure that the Cam is facing up when

the key is horizontal.

STEP 2

Install the Brackets onto the Column

Select an installation point for the drawer body. When installed, the

top of the drawer body will be about 1/2" above the top of the upper

bracket.

Install the top bracket using four 3/4" self-threading screws. Install the

lower bracket with one hole open below the upper bracket.

Carefully tip the cart on its back so that the pins on the brackets are

facing up.

STEP 3

Install the Enclosure

Lift the enclosure body onto the cart so that the pins on the brackets

line up with the holes on the enclosure body.

Attach the body to the brackets using a 7/16" nutdriver or socket or the

3-way wrench and eight Nylock Nuts.

STEP 4

Install the Drawers

Slide the larger drawer into place. Move it in and out a few times to set the ball bearings in the glides.

Slide the small drawer into place. Move it in and out a few times to set the bearings.

CONGRATULATIONS! YOUR DRAWER ENCLOSURE ASSEMBLY IS COMPLETE!

4 of 4

300-5522-00 rev. B • 06/16

All trademarks are the property of their respective companies. Anthro is a registered trademark and brand of Ergotron Inc.

Anthro-DNA is a trademark of Ergotron Inc.

For local customer care phone numbers visit: http://contact.ergotron.com

For Service visit: www.ergotron.com

For Warranty visit: www.ergotron.com/warranty

Andere Ergotron Inneneinrichtung Handbücher

Ergotron

Ergotron LearnFit 24-756-003 Bedienungsanleitung

Ergotron

Ergotron WorkFit-T Bedienungsanleitung

Ergotron

Ergotron JUV Bedienungsanleitung

Ergotron

Ergotron WorkFit B Bedienungsanleitung

Ergotron

Ergotron 48" Bench II Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Notebook PC Stand Bedienungsanleitung

Ergotron

Ergotron Modesty Panel Bedienungsanleitung

Ergotron

Ergotron Elevate II Bedienungsanleitung

Ergotron

Ergotron 19610 Bedienungsanleitung

Ergotron

Ergotron 97-540-053 Bedienungsanleitung

Ergotron

Ergotron 97-540-053 Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Bedienungsanleitung

Ergotron

Ergotron LearnFit 24-481-003 Bedienungsanleitung

Ergotron

Ergotron LX Sit-Stand Bedienungsanleitung

Ergotron

Ergotron StyleView Bedienungsanleitung

Ergotron

Ergotron Bench II Bedienungsanleitung

Ergotron

Ergotron Glide Upgrade Bedienungsanleitung

Ergotron

Ergotron 72” AnthroBench II Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron WorkFit-A, Single LCD Mount, LD Bedienungsanleitung

Ergotron

Ergotron WORKFIT-DL Bedienungsanleitung

Ergotron

Ergotron WORKFIT Bedienungsanleitung

Ergotron

Ergotron WORKFIT Standing Desk Converter Bedienungsanleitung

Ergotron

Ergotron LearnFit SE Fehlerbehebungshandbuch

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung